Commit fcf6db06 authored by danicampora's avatar danicampora
Browse files

cc3200: Register pybsd with the sleep module and use pin_config().

parent 98b85683
......@@ -43,22 +43,18 @@
#include "simplelink.h"
#include "debug.h"
#include "mpexception.h"
#include "pybsleep.h"
#if MICROPY_HW_HAS_SDCARD
#define PYBSD_FREQUENCY_HZ 15000000 // 15MHz
#define PYBSD_FREQUENCY_HZ 15000000 // 15MHz
typedef struct {
mp_obj_base_t base;
FATFS *fatfs;
pin_obj_t *pin_d0;
pin_obj_t *pin_clk;
pin_obj_t *pin_cmd;
pin_obj_t *pin_sd_detect;
byte af_d0;
byte af_clk;
byte af_cmd;
pin_obj_t *pin_detect;
bool pinsset;
bool enabled;
bool inpath;
......@@ -86,15 +82,35 @@ void pybsd_init0 (void) {
}
bool pybsd_is_present(void) {
if (pybsd_obj.pin_sd_detect) {
return pybsd_obj.enabled && MAP_GPIOPinRead(pybsd_obj.pin_sd_detect->port, pybsd_obj.pin_sd_detect->bit);
if (pybsd_obj.pin_detect) {
return pybsd_obj.enabled && MAP_GPIOPinRead(pybsd_obj.pin_detect->port, pybsd_obj.pin_detect->bit);
}
return pybsd_obj.enabled;
}
void pybsd_deinit (void) {
pybsd_disable ((mp_obj_t)&pybsd_obj);
pybsd_obj.pin_sd_detect = NULL;
pybsd_obj.pin_detect = NULL;
}
/******************************************************************************
DECLARE PRIVATE FUNCTIONS
******************************************************************************/
/// Initalizes the sd card driver
STATIC void pybsd_init (pybsd_obj_t *self) {
// Configure the clock pin as output only
MAP_PinDirModeSet(self->pin_clk->pin_num, PIN_DIR_MODE_OUT);
// Enable SD peripheral clock
MAP_PRCMPeripheralClkEnable(PRCM_SDHOST, PRCM_RUN_MODE_CLK | PRCM_SLP_MODE_CLK);
// Reset MMCHS
MAP_PRCMPeripheralReset(PRCM_SDHOST);
// Initialize MMCHS
MAP_SDHostInit(SDHOST_BASE);
// Configure the card clock
MAP_SDHostSetExpClk(SDHOST_BASE, MAP_PRCMPeripheralClockGet(PRCM_SDHOST), PYBSD_FREQUENCY_HZ);
self->enabled = true;
}
/******************************************************************************/
......@@ -119,35 +135,23 @@ STATIC mp_obj_t pybsd_make_new (mp_obj_t type_in, mp_uint_t n_args, mp_uint_t n_
mp_arg_check_num(n_args, n_kw, 0, 7, false);
if (n_args >= 6) {
// get pins and afs
pybsd_obj.pin_d0 = (pin_obj_t *)pin_find(args[0]);
pybsd_obj.af_d0 = mp_obj_get_int(args[1]);
pin_verify_af (pybsd_obj.af_d0);
// save the clock pin for later use
pybsd_obj.pin_clk = (pin_obj_t *)pin_find(args[2]);
pybsd_obj.af_clk = mp_obj_get_int(args[3]);
pin_verify_af (pybsd_obj.af_clk);
pybsd_obj.pin_cmd = (pin_obj_t *)pin_find(args[4]);
pybsd_obj.af_cmd = mp_obj_get_int(args[5]);
pin_verify_af (pybsd_obj.af_cmd);
// configure the sdhost pins
// TODO: all pin configs must go through pin_config()
MAP_PinTypeSDHost(pybsd_obj.pin_d0->pin_num, pybsd_obj.af_d0);
MAP_PinTypeSDHost(pybsd_obj.pin_clk->pin_num, pybsd_obj.af_clk);
MAP_PinDirModeSet(pybsd_obj.pin_clk->pin_num, PIN_DIR_MODE_OUT);
MAP_PinTypeSDHost(pybsd_obj.pin_cmd->pin_num, pybsd_obj.af_cmd);
// enable pull-ups on data and cmd
// TODO: all pin configs must go through pin_config()
MAP_PinConfigSet(pybsd_obj.pin_d0->pin_num, PIN_STRENGTH_4MA, PIN_TYPE_STD_PU);
MAP_PinConfigSet(pybsd_obj.pin_cmd->pin_num, PIN_STRENGTH_4MA, PIN_TYPE_STD_PU);
// configure the data pin with pull-up enabled
pin_config ((pin_obj_t *)pin_find(args[0]), mp_obj_get_int(args[1]), 0, PIN_TYPE_STD_PU, PIN_STRENGTH_4MA);
// configure the clock pin
pin_config (pybsd_obj.pin_clk, mp_obj_get_int(args[3]), 0, PIN_TYPE_STD, PIN_STRENGTH_4MA);
// configure the command pin with pull-up enabled
pin_config ((pin_obj_t *)pin_find(args[4]), mp_obj_get_int(args[5]), 0, PIN_TYPE_STD_PU, PIN_STRENGTH_4MA);
// card detect pin was provided
if (n_args == 7) {
pybsd_obj.pin_sd_detect = (pin_obj_t *)pin_find(args[6]);
pin_config (pybsd_obj.pin_sd_detect, PIN_MODE_0, GPIO_DIR_MODE_IN, PIN_TYPE_STD_PU, PIN_STRENGTH_4MA);
pybsd_obj.pin_detect = (pin_obj_t *)pin_find(args[6]);
pin_config (pybsd_obj.pin_detect, PIN_MODE_0, GPIO_DIR_MODE_IN, PIN_TYPE_STD_PU, PIN_STRENGTH_4MA);
}
pybsd_obj.pinsset = true;
pybsd_obj.base.type = &pyb_sd_type;
}
else if (n_args == 0) {
if (!pybsd_obj.pinsset) {
......@@ -158,9 +162,6 @@ STATIC mp_obj_t pybsd_make_new (mp_obj_t type_in, mp_uint_t n_args, mp_uint_t n_
nlr_raise(mp_obj_new_exception_msg(&mp_type_TypeError, mpexception_num_type_invalid_arguments));
}
// TODO: register with the sleep module!!
pybsd_obj.base.type = &pyb_sd_type;
return &pybsd_obj;
}
......@@ -168,16 +169,9 @@ STATIC mp_obj_t pybsd_make_new (mp_obj_t type_in, mp_uint_t n_args, mp_uint_t n_
/// Enables the sd card and mounts the file system
STATIC mp_obj_t pybsd_enable (mp_obj_t self_in) {
pybsd_obj_t *self = self_in;
// Enable SD peripheral clock
MAP_PRCMPeripheralClkEnable(PRCM_SDHOST, PRCM_RUN_MODE_CLK | PRCM_SLP_MODE_CLK);
// Reset MMCHS
MAP_PRCMPeripheralReset(PRCM_SDHOST);
// Initialize MMCHS
MAP_SDHostInit(SDHOST_BASE);
// Configure the card clock
MAP_SDHostSetExpClk(SDHOST_BASE, MAP_PRCMPeripheralClockGet(PRCM_SDHOST), PYBSD_FREQUENCY_HZ);
self->enabled = true;
// do the init first
pybsd_init (self);
// try to mount the sd card on /SD
if (FR_OK != f_mount(self->fatfs, "/SD", 1)) {
......@@ -188,6 +182,9 @@ STATIC mp_obj_t pybsd_enable (mp_obj_t self_in) {
mp_obj_list_append(mp_sys_path, MP_OBJ_NEW_QSTR(MP_QSTR__slash_SD_slash_LIB));
self->inpath = true;
// register it with the sleep module
pybsleep_add ((const mp_obj_t)&pybsd_obj, (WakeUpCB_t)pybsd_init);
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_1(pybsd_enable_obj, pybsd_enable);
......@@ -208,6 +205,9 @@ STATIC mp_obj_t pybsd_disable (mp_obj_t self_in) {
}
// disable the peripheral
MAP_PRCMPeripheralClkDisable(PRCM_SDHOST, PRCM_RUN_MODE_CLK | PRCM_SLP_MODE_CLK);
// unregister with the sleep module
pybsleep_remove (self);
}
return mp_const_none;
}
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment