Commit d977d268 authored by Damien George's avatar Damien George
Browse files

py/gc: Use size_t instead of mp_uint_t to count things related to heap.

size_t is the correct type to use to count things related to the size of
the address space.  Using size_t (instead of mp_uint_t) is important for
the efficiency of ports that configure mp_uint_t to larger than the
machine word size.
parent f7782f80
......@@ -105,7 +105,7 @@ void gc_init(void *start, void *end) {
// F = A * BLOCKS_PER_ATB / BLOCKS_PER_FTB
// P = A * BLOCKS_PER_ATB * BYTES_PER_BLOCK
// => T = A * (1 + BLOCKS_PER_ATB / BLOCKS_PER_FTB + BLOCKS_PER_ATB * BYTES_PER_BLOCK)
mp_uint_t total_byte_len = (byte*)end - (byte*)start;
size_t total_byte_len = (byte*)end - (byte*)start;
#if MICROPY_ENABLE_FINALISER
MP_STATE_MEM(gc_alloc_table_byte_len) = total_byte_len * BITS_PER_BYTE / (BITS_PER_BYTE + BITS_PER_BYTE * BLOCKS_PER_ATB / BLOCKS_PER_FTB + BITS_PER_BYTE * BLOCKS_PER_ATB * BYTES_PER_BLOCK);
#else
......@@ -115,11 +115,11 @@ void gc_init(void *start, void *end) {
MP_STATE_MEM(gc_alloc_table_start) = (byte*)start;
#if MICROPY_ENABLE_FINALISER
mp_uint_t gc_finaliser_table_byte_len = (MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB + BLOCKS_PER_FTB - 1) / BLOCKS_PER_FTB;
size_t gc_finaliser_table_byte_len = (MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB + BLOCKS_PER_FTB - 1) / BLOCKS_PER_FTB;
MP_STATE_MEM(gc_finaliser_table_start) = MP_STATE_MEM(gc_alloc_table_start) + MP_STATE_MEM(gc_alloc_table_byte_len);
#endif
mp_uint_t gc_pool_block_len = MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB;
size_t gc_pool_block_len = MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB;
MP_STATE_MEM(gc_pool_start) = (byte*)end - gc_pool_block_len * BYTES_PER_BLOCK;
MP_STATE_MEM(gc_pool_end) = end;
......@@ -175,7 +175,7 @@ bool gc_is_locked(void) {
#define VERIFY_MARK_AND_PUSH(ptr) \
do { \
if (VERIFY_PTR(ptr)) { \
mp_uint_t _block = BLOCK_FROM_PTR(ptr); \
size_t _block = BLOCK_FROM_PTR(ptr); \
if (ATB_GET_KIND(_block) == AT_HEAD) { \
/* an unmarked head, mark it, and push it on gc stack */ \
ATB_HEAD_TO_MARK(_block); \
......@@ -194,7 +194,7 @@ STATIC void gc_drain_stack(void) {
size_t block = *--MP_STATE_MEM(gc_sp);
// work out number of consecutive blocks in the chain starting with this one
mp_uint_t n_blocks = 0;
size_t n_blocks = 0;
do {
n_blocks += 1;
} while (ATB_GET_KIND(block + n_blocks) == AT_TAIL);
......@@ -214,7 +214,7 @@ STATIC void gc_deal_with_stack_overflow(void) {
MP_STATE_MEM(gc_sp) = MP_STATE_MEM(gc_stack);
// scan entire memory looking for blocks which have been marked but not their children
for (mp_uint_t block = 0; block < MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB; block++) {
for (size_t block = 0; block < MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB; block++) {
// trace (again) if mark bit set
if (ATB_GET_KIND(block) == AT_MARK) {
*MP_STATE_MEM(gc_sp)++ = block;
......@@ -303,8 +303,8 @@ void gc_info(gc_info_t *info) {
info->num_1block = 0;
info->num_2block = 0;
info->max_block = 0;
for (mp_uint_t block = 0, len = 0; block < MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB; block++) {
mp_uint_t kind = ATB_GET_KIND(block);
for (size_t block = 0, len = 0; block < MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB; block++) {
size_t kind = ATB_GET_KIND(block);
if (kind == AT_FREE || kind == AT_HEAD) {
if (len == 1) {
info->num_1block += 1;
......@@ -342,7 +342,7 @@ void gc_info(gc_info_t *info) {
}
void *gc_alloc(size_t n_bytes, bool has_finaliser) {
mp_uint_t n_blocks = ((n_bytes + BYTES_PER_BLOCK - 1) & (~(BYTES_PER_BLOCK - 1))) / BYTES_PER_BLOCK;
size_t n_blocks = ((n_bytes + BYTES_PER_BLOCK - 1) & (~(BYTES_PER_BLOCK - 1))) / BYTES_PER_BLOCK;
DEBUG_printf("gc_alloc(" UINT_FMT " bytes -> " UINT_FMT " blocks)\n", n_bytes, n_blocks);
// check if GC is locked
......@@ -355,10 +355,10 @@ void *gc_alloc(size_t n_bytes, bool has_finaliser) {
return NULL;
}
mp_uint_t i;
mp_uint_t end_block;
mp_uint_t start_block;
mp_uint_t n_free = 0;
size_t i;
size_t end_block;
size_t start_block;
size_t n_free = 0;
int collected = !MP_STATE_MEM(gc_auto_collect_enabled);
for (;;) {
......@@ -400,7 +400,7 @@ found:
// mark rest of blocks as used tail
// TODO for a run of many blocks can make this more efficient
for (mp_uint_t bl = start_block + 1; bl <= end_block; bl++) {
for (size_t bl = start_block + 1; bl <= end_block; bl++) {
ATB_FREE_TO_TAIL(bl);
}
......@@ -454,7 +454,7 @@ void gc_free(void *ptr) {
DEBUG_printf("gc_free(%p)\n", ptr);
if (VERIFY_PTR(ptr)) {
mp_uint_t block = BLOCK_FROM_PTR(ptr);
size_t block = BLOCK_FROM_PTR(ptr);
if (ATB_GET_KIND(block) == AT_HEAD) {
#if MICROPY_ENABLE_FINALISER
FTB_CLEAR(block);
......@@ -483,10 +483,10 @@ void gc_free(void *ptr) {
size_t gc_nbytes(const void *ptr) {
if (VERIFY_PTR(ptr)) {
mp_uint_t block = BLOCK_FROM_PTR(ptr);
size_t block = BLOCK_FROM_PTR(ptr);
if (ATB_GET_KIND(block) == AT_HEAD) {
// work out number of consecutive blocks in the chain starting with this on
mp_uint_t n_blocks = 0;
size_t n_blocks = 0;
do {
n_blocks += 1;
} while (ATB_GET_KIND(block + n_blocks) == AT_TAIL);
......@@ -551,7 +551,7 @@ void *gc_realloc(void *ptr_in, size_t n_bytes, bool allow_move) {
}
// get first block
mp_uint_t block = BLOCK_FROM_PTR(ptr);
size_t block = BLOCK_FROM_PTR(ptr);
// sanity check the ptr is pointing to the head of a block
if (ATB_GET_KIND(block) != AT_HEAD) {
......@@ -559,7 +559,7 @@ void *gc_realloc(void *ptr_in, size_t n_bytes, bool allow_move) {
}
// compute number of new blocks that are requested
mp_uint_t new_blocks = (n_bytes + BYTES_PER_BLOCK - 1) / BYTES_PER_BLOCK;
size_t new_blocks = (n_bytes + BYTES_PER_BLOCK - 1) / BYTES_PER_BLOCK;
// Get the total number of consecutive blocks that are already allocated to
// this chunk of memory, and then count the number of free blocks following
......@@ -567,10 +567,10 @@ void *gc_realloc(void *ptr_in, size_t n_bytes, bool allow_move) {
// free blocks to satisfy the realloc. Note that we need to compute the
// total size of the existing memory chunk so we can correctly and
// efficiently shrink it (see below for shrinking code).
mp_uint_t n_free = 0;
mp_uint_t n_blocks = 1; // counting HEAD block
mp_uint_t max_block = MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB;
for (mp_uint_t bl = block + n_blocks; bl < max_block; bl++) {
size_t n_free = 0;
size_t n_blocks = 1; // counting HEAD block
size_t max_block = MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB;
for (size_t bl = block + n_blocks; bl < max_block; bl++) {
byte block_type = ATB_GET_KIND(bl);
if (block_type == AT_TAIL) {
n_blocks++;
......@@ -595,7 +595,7 @@ void *gc_realloc(void *ptr_in, size_t n_bytes, bool allow_move) {
// check if we can shrink the allocated area
if (new_blocks < n_blocks) {
// free unneeded tail blocks
for (mp_uint_t bl = block + new_blocks, count = n_blocks - new_blocks; count > 0; bl++, count--) {
for (size_t bl = block + new_blocks, count = n_blocks - new_blocks; count > 0; bl++, count--) {
ATB_ANY_TO_FREE(bl);
}
......@@ -614,7 +614,7 @@ void *gc_realloc(void *ptr_in, size_t n_bytes, bool allow_move) {
// check if we can expand in place
if (new_blocks <= n_blocks + n_free) {
// mark few more blocks as used tail
for (mp_uint_t bl = block + n_blocks; bl < block + new_blocks; bl++) {
for (size_t bl = block + n_blocks; bl < block + new_blocks; bl++) {
assert(ATB_GET_KIND(bl) == AT_FREE);
ATB_FREE_TO_TAIL(bl);
}
......@@ -665,18 +665,18 @@ void gc_dump_info(void) {
}
void gc_dump_alloc_table(void) {
static const mp_uint_t DUMP_BYTES_PER_LINE = 64;
static const size_t DUMP_BYTES_PER_LINE = 64;
#if !EXTENSIVE_HEAP_PROFILING
// When comparing heap output we don't want to print the starting
// pointer of the heap because it changes from run to run.
mp_printf(&mp_plat_print, "GC memory layout; from %p:", MP_STATE_MEM(gc_pool_start));
#endif
for (mp_uint_t bl = 0; bl < MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB; bl++) {
for (size_t bl = 0; bl < MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB; bl++) {
if (bl % DUMP_BYTES_PER_LINE == 0) {
// a new line of blocks
{
// check if this line contains only free blocks
mp_uint_t bl2 = bl;
size_t bl2 = bl;
while (bl2 < MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB && ATB_GET_KIND(bl2) == AT_FREE) {
bl2++;
}
......
......@@ -48,7 +48,7 @@ typedef struct _mp_state_mem_t {
#endif
byte *gc_alloc_table_start;
mp_uint_t gc_alloc_table_byte_len;
size_t gc_alloc_table_byte_len;
#if MICROPY_ENABLE_FINALISER
byte *gc_finaliser_table_start;
#endif
......@@ -56,8 +56,8 @@ typedef struct _mp_state_mem_t {
byte *gc_pool_end;
int gc_stack_overflow;
mp_uint_t gc_stack[MICROPY_ALLOC_GC_STACK_SIZE];
mp_uint_t *gc_sp;
size_t gc_stack[MICROPY_ALLOC_GC_STACK_SIZE];
size_t *gc_sp;
uint16_t gc_lock_depth;
// This variable controls auto garbage collection. If set to 0 then the
......@@ -65,10 +65,10 @@ typedef struct _mp_state_mem_t {
// you can still allocate/free memory and also explicitly call gc_collect.
uint16_t gc_auto_collect_enabled;
mp_uint_t gc_last_free_atb_index;
size_t gc_last_free_atb_index;
#if MICROPY_PY_GC_COLLECT_RETVAL
mp_uint_t gc_collected;
size_t gc_collected;
#endif
} mp_state_mem_t;
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment