Commit 908a670d authored by Damien George's avatar Damien George
Browse files

stmhal: Add intensity method for blue LED.

As part of this, rejig the way TIM3 is initialised, since it's now
shared by USB CDC and the blue LED PWM.
parent 02fa0358
#include <stdio.h>
#include <stm32f4xx_hal.h>
#include "usbd_cdc_msc.h"
#include "usbd_cdc_interface.h"
#include "misc.h"
#include "mpconfig.h"
#include "qstr.h"
#include "obj.h"
#include "runtime.h"
#include "led.h"
#include "pin.h"
#include "build/pins.h"
......@@ -38,12 +41,43 @@ void led_init(void) {
GPIO_InitStructure.Pin = gLed[led]->pin_mask;
HAL_GPIO_Init(gLed[led]->gpio, &GPIO_InitStructure);
}
// LED4 (blue) is on PB4 which is TIM3_CH1
// we use PWM on this channel to fade the LED
// GPIO configuration
GPIO_InitStructure.Pin = GPIO_PIN_4;
GPIO_InitStructure.Mode = GPIO_MODE_AF_PP;
GPIO_InitStructure.Speed = GPIO_SPEED_FAST;
GPIO_InitStructure.Pull = GPIO_NOPULL;
GPIO_InitStructure.Alternate = GPIO_AF2_TIM3;
HAL_GPIO_Init(GPIOB, &GPIO_InitStructure);
// PWM mode configuration
TIM_OC_InitTypeDef oc_init;
oc_init.OCMode = TIM_OCMODE_PWM1;
oc_init.Pulse = 0; // off
oc_init.OCPolarity = TIM_OCPOLARITY_HIGH;
oc_init.OCFastMode = TIM_OCFAST_DISABLE;
HAL_TIM_PWM_ConfigChannel(&TIM3_Handle, &oc_init, TIM_CHANNEL_1);
// start PWM
TIM_CCxChannelCmd(TIM3, TIM_CHANNEL_1, TIM_CCx_ENABLE);
//HAL_TIM_PWM_Start(&USBD_CDC_TIM3_Handle, TIM_CHANNEL_1);
}
void led_state(pyb_led_t led, int state) {
if (led < 1 || led > NUM_LEDS) {
return;
}
if (led == 4) {
if (state) {
TIM3->CCR1 = 0xffff;
} else {
TIM3->CCR1 = 0;
}
return;
}
const pin_obj_t *led_pin = gLed[led - 1];
//printf("led_state(%d,%d)\n", led, state);
if (state == 0) {
......@@ -73,6 +107,23 @@ void led_toggle(pyb_led_t led) {
}
}
int led_get_state(pyb_led_t led) {
if (led < 1 || led > NUM_LEDS) {
return 0;
}
const pin_obj_t *led_pin = gLed[led - 1];
GPIO_TypeDef *gpio = led_pin->gpio;
// TODO convert high/low to on/off depending on board
if (gpio->ODR & led_pin->pin_mask) {
// pin is high
return 1;
} else {
// pin is low
return 0;
}
}
void led_debug(int n, int delay) {
led_state(1, n & 1);
led_state(2, n & 2);
......@@ -112,25 +163,47 @@ mp_obj_t led_obj_toggle(mp_obj_t self_in) {
return mp_const_none;
}
static MP_DEFINE_CONST_FUN_OBJ_1(led_obj_on_obj, led_obj_on);
static MP_DEFINE_CONST_FUN_OBJ_1(led_obj_off_obj, led_obj_off);
static MP_DEFINE_CONST_FUN_OBJ_1(led_obj_toggle_obj, led_obj_toggle);
mp_obj_t led_obj_state(uint n_args, const mp_obj_t *args) {
pyb_led_obj_t *self = args[0];
if (n_args == 0) {
return MP_BOOL(led_get_state(self->led_id));
} else {
led_state(self->led_id, rt_is_true(args[1]));
return mp_const_none;
}
}
mp_obj_t led_obj_intensity(mp_obj_t self_in, mp_obj_t intensity) {
pyb_led_obj_t *self = self_in;
if (self->led_id == 4) {
TIM3->CCR1 = mp_obj_get_int(intensity);
}
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_1(led_obj_on_obj, led_obj_on);
STATIC MP_DEFINE_CONST_FUN_OBJ_1(led_obj_off_obj, led_obj_off);
STATIC MP_DEFINE_CONST_FUN_OBJ_1(led_obj_toggle_obj, led_obj_toggle);
STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(led_obj_state_obj, 1, 2, led_obj_state);
STATIC MP_DEFINE_CONST_FUN_OBJ_2(led_obj_intensity_obj, led_obj_intensity);
static const mp_method_t led_methods[] = {
STATIC const mp_method_t led_methods[] = {
{ "on", &led_obj_on_obj },
{ "off", &led_obj_off_obj },
{ "toggle", &led_obj_toggle_obj },
{ "state", &led_obj_state_obj },
{ "intensity", &led_obj_intensity_obj },
{ NULL, NULL },
};
static const mp_obj_type_t led_obj_type = {
STATIC const mp_obj_type_t led_obj_type = {
{ &mp_type_type },
.name = MP_QSTR_Led,
.print = led_obj_print,
.methods = led_methods,
};
static mp_obj_t pyb_Led(mp_obj_t led_id) {
STATIC mp_obj_t pyb_Led(mp_obj_t led_id) {
pyb_led_obj_t *o = m_new_obj(pyb_led_obj_t);
o->base.type = &led_obj_type;
o->led_id = mp_obj_get_int(led_id);
......
......@@ -37,10 +37,10 @@
#include "lcd.h"
#include "accel.h"
#include "servo.h"
#include "pin.h"
#if 0
#include "timer.h"
#include "pybwlan.h"
#include "pin.h"
#endif
void SystemClock_Config(void);
......@@ -266,9 +266,7 @@ soft_reset:
#endif
#endif
#if 0
pin_map_init();
#endif
// add some functions to the builtin Python namespace
rt_store_name(MP_QSTR_help, rt_make_function_n(0, pyb_help));
......
......@@ -5,16 +5,7 @@
* @version V1.0.1
* @date 26-February-2014
* @brief HAL MSP module.
*
@verbatim
===============================================================================
##### How to use this driver #####
===============================================================================
[..]
This file is generated automatically by MicroXplorer and eventually modified
by the user
@endverbatim
*
******************************************************************************
* @attention
*
......@@ -56,25 +47,7 @@
#include "obj.h"
#include "servo.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup HAL_MSP
* @brief HAL MSP module.
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup HAL_MSP_Private_Functions
* @{
*/
TIM_HandleTypeDef TIM3_Handle;
/**
* @brief Initializes the Global MSP.
......@@ -83,9 +56,21 @@
*/
void HAL_MspInit(void) {
// set up the timer for USBD CDC
USBD_CDC_TIMx_CLK_ENABLE();
HAL_NVIC_SetPriority(USBD_CDC_TIMx_IRQn, 6, 0);
HAL_NVIC_EnableIRQ(USBD_CDC_TIMx_IRQn);
__TIM3_CLK_ENABLE();
TIM3_Handle.Instance = TIM3;
TIM3_Handle.Init.Period = (USBD_CDC_POLLING_INTERVAL*1000) - 1;
TIM3_Handle.Init.Prescaler = 84-1;
TIM3_Handle.Init.ClockDivision = 0;
TIM3_Handle.Init.CounterMode = TIM_COUNTERMODE_UP;
HAL_TIM_Base_Init(&TIM3_Handle);
HAL_NVIC_SetPriority(TIM3_IRQn, 6, 0);
HAL_NVIC_EnableIRQ(TIM3_IRQn);
if (HAL_TIM_Base_Start(&TIM3_Handle) != HAL_OK) {
/* Starting Error */
}
}
/**
......@@ -94,9 +79,9 @@ void HAL_MspInit(void) {
* @retval None
*/
void HAL_MspDeInit(void) {
// reset USBD CDC timer
USBD_CDC_TIMx_FORCE_RESET();
USBD_CDC_TIMx_RELEASE_RESET();
// reset TIM3 timer
__TIM3_FORCE_RESET();
__TIM3_RELEASE_RESET();
}
/**
......@@ -162,7 +147,7 @@ void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc)
}
void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) {
if (htim == &USBD_CDC_TIM3_Handle) {
if (htim == &TIM3_Handle) {
USBD_CDC_HAL_TIM_PeriodElapsedCallback();
} else if (htim == &servo_TIM2_Handle) {
servo_timer_irq_callback();
......
......@@ -357,8 +357,7 @@ void TIM2_IRQHandler(void) {
}
void TIM3_IRQHandler(void) {
// USBD CDC timer is TIM3
HAL_TIM_IRQHandler(&USBD_CDC_TIM3_Handle);
HAL_TIM_IRQHandler(&TIM3_Handle);
}
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
......@@ -65,8 +65,6 @@ static uint16_t UserTxBufPtrOut = 0; // increment this pointer modulo APP_TX_DAT
static int user_interrupt_char = VCP_CHAR_NONE;
static void *user_interrupt_data = NULL;
/* TIM handler declaration */
TIM_HandleTypeDef USBD_CDC_TIM3_Handle;
/* USB handler declaration */
extern USBD_HandleTypeDef hUSBDDevice;
......@@ -76,8 +74,6 @@ static int8_t CDC_Itf_DeInit (void);
static int8_t CDC_Itf_Control (uint8_t cmd, uint8_t* pbuf, uint16_t length);
static int8_t CDC_Itf_Receive (uint8_t* pbuf, uint32_t *Len);
static void TIM_Config(void);
const USBD_CDC_ItfTypeDef USBD_CDC_fops = {
CDC_Itf_Init,
CDC_Itf_DeInit,
......@@ -125,21 +121,19 @@ static int8_t CDC_Itf_Init(void)
/* Transfer error in reception process */
Error_Handler();
}
#endif
/*##-3- Configure the TIM Base generation #################################*/
now done in HAL_MspInit
TIM_Config();
#endif
/*##-4- Start the TIM Base generation in interrupt mode ####################*/
/* Start Channel1 */
if(HAL_TIM_Base_Start_IT(&USBD_CDC_TIM3_Handle) != HAL_OK)
{
/* Starting Error */
}
/*##-4- Start the TIM Base generation in interrupt mode ####################*/
/* Start Channel1 */
__HAL_TIM_ENABLE_IT(&TIM3_Handle, TIM_IT_UPDATE);
/*##-5- Set Application Buffers ############################################*/
USBD_CDC_SetTxBuffer(&hUSBDDevice, UserTxBuffer, 0);
USBD_CDC_SetRxBuffer(&hUSBDDevice, UserRxBuffer);
/*##-5- Set Application Buffers ############################################*/
USBD_CDC_SetTxBuffer(&hUSBDDevice, UserTxBuffer, 0);
USBD_CDC_SetRxBuffer(&hUSBDDevice, UserRxBuffer);
UserRxBufCur = 0;
UserRxBufLen = 0;
......@@ -147,7 +141,7 @@ static int8_t CDC_Itf_Init(void)
user_interrupt_char = VCP_CHAR_NONE;
user_interrupt_data = NULL;
return (USBD_OK);
return (USBD_OK);
}
/**
......@@ -378,29 +372,3 @@ int USBD_CDC_RxGet(void) {
}
return c;
}
/**
* @brief TIM_Config: Configure TIMx timer
* @param None.
* @retval None.
*/
static void TIM_Config(void)
{
/* Set TIMx instance */
USBD_CDC_TIM3_Handle.Instance = USBD_CDC_TIMx;
/* Initialize TIM3 peripheral as follow:
+ Period = 10000 - 1
+ Prescaler = ((SystemCoreClock/2)/10000) - 1
+ ClockDivision = 0
+ Counter direction = Up
*/
USBD_CDC_TIM3_Handle.Init.Period = (USBD_CDC_POLLING_INTERVAL*1000) - 1;
USBD_CDC_TIM3_Handle.Init.Prescaler = 84-1;
USBD_CDC_TIM3_Handle.Init.ClockDivision = 0;
USBD_CDC_TIM3_Handle.Init.CounterMode = TIM_COUNTERMODE_UP;
if(HAL_TIM_Base_Init(&USBD_CDC_TIM3_Handle) != HAL_OK)
{
/* Initialization Error */
}
}
......@@ -33,21 +33,11 @@
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Definition for TIMx clock resources */
#define USBD_CDC_TIMx TIM3
#define USBD_CDC_TIMx_CLK_ENABLE __TIM3_CLK_ENABLE
#define USBD_CDC_TIMx_FORCE_RESET() __TIM3_FORCE_RESET()
#define USBD_CDC_TIMx_RELEASE_RESET() __TIM3_RELEASE_RESET()
/* Definition for TIMx's NVIC */
#define USBD_CDC_TIMx_IRQn TIM3_IRQn
//#define USBD_CDC_TIMx_IRQHandler TIM3_IRQHandler // this is hard coded in stm32f4xx_it.c
/* Periodically, the state of the buffer "UserTxBuffer" is checked.
The period depends on USBD_CDC_POLLING_INTERVAL */
#define USBD_CDC_POLLING_INTERVAL 10 /* in ms. The max is 65 and the min is 1 */
extern TIM_HandleTypeDef USBD_CDC_TIM3_Handle;
extern TIM_HandleTypeDef TIM3_Handle;
extern const USBD_CDC_ItfTypeDef USBD_CDC_fops;
void USBD_CDC_HAL_TIM_PeriodElapsedCallback(void);
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment