Commit 8cbbaa05 authored by danicampora's avatar danicampora
Browse files

cc3200: Add WiPy and WiPy_SD board support.

parent 9e44383e
/*
* This file is part of the Micro Python project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2013, 2014 Damien P. George
* Copyright (c) 2015 Daniel Campora
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#define LAUNCHXL
#define MICROPY_HW_BOARD_NAME "WiPy"
#define MICROPY_HW_MCU_NAME "CC3200"
#define MICROPY_HW_HAS_SDCARD (0)
#define MICROPY_HW_ENABLE_RNG (1)
#define MICROPY_HW_ENABLE_RTC (1)
#define MICROPY_STDIO_UART PYB_UART_0
#define MICROPY_STDIO_UART_BAUD 115200
#define MICROPY_SYS_LED_PRCM PRCM_GPIOA3
#define MICROPY_SAFE_BOOT_PRCM PRCM_GPIOA3
#define MICROPY_SYS_LED_PORT GPIOA3_BASE
#define MICROPY_SAFE_BOOT_PORT GPIOA3_BASE
#define MICROPY_SYS_LED_PIN_NUM PIN_21
#define MICROPY_SAFE_BOOT_PIN_NUM PIN_18
#define MICROPY_SYS_LED_PORT_PIN GPIO_PIN_1 // GPIO25 (SOP2)
#define MICROPY_SAFE_BOOT_PORT_PIN GPIO_PIN_4 // GPIO28
#define MICROPY_PORT_SFLASH_BLOCK_COUNT 96
P12,58
P13,4
P14,3
P15,61
P16,59
P17,5
P18,62
P19,1
P110,2
P33,57
P34,60
P37,63
P38,53
P39,64
P310,50
P49,16
P410,17
P22,18
P23,8
P24,45
P26,7
P27,6
P28,21
P29,55
P210,15
\ No newline at end of file
/*
* This file is part of the Micro Python project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2013, 2014 Damien P. George
* Copyright (c) 2015 Daniel Campora
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#define LAUNCHXL
#define MICROPY_HW_BOARD_NAME "WiPy_SD"
#define MICROPY_HW_MCU_NAME "CC3200"
#define MICROPY_HW_HAS_SDCARD (0)
#define MICROPY_HW_ENABLE_RNG (1)
#define MICROPY_HW_ENABLE_RTC (1)
#define MICROPY_STDIO_UART PYB_UART_0
#define MICROPY_STDIO_UART_BAUD 115200
#define MICROPY_SYS_LED_PRCM PRCM_GPIOA3
#define MICROPY_SAFE_BOOT_PRCM PRCM_GPIOA3
#define MICROPY_SYS_LED_PORT GPIOA3_BASE
#define MICROPY_SAFE_BOOT_PORT GPIOA3_BASE
#define MICROPY_SYS_LED_PIN_NUM PIN_21
#define MICROPY_SAFE_BOOT_PIN_NUM PIN_18
#define MICROPY_SYS_LED_PORT_PIN GPIO_PIN_1 // GPIO25 (SOP2)
#define MICROPY_SAFE_BOOT_PORT_PIN GPIO_PIN_4 // GPIO28
#define MICROPY_PORT_SFLASH_BLOCK_COUNT 96
P12,58
P13,4
P14,3
P15,61
P16,59
P17,5
P18,62
P19,1
P110,2
P33,57
P34,60
P37,63
P38,53
P39,64
P310,50
P49,16
P410,17
P22,18
P23,8
P24,45
P26,7
P27,6
P28,21
P29,55
P210,15
\ No newline at end of file
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment