Commit 86f0b31b authored by blmorris's avatar blmorris
Browse files

Change boolean 'use_16bit_addr' to int 'addr_size', can be either 8 or 16 bits, default value is 8

to maintain compatibility with existing code.
parent 721d6240
......@@ -453,7 +453,7 @@ STATIC mp_obj_t pyb_i2c_recv(uint n_args, const mp_obj_t *args, mp_map_t *kw_arg
}
STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_i2c_recv_obj, 1, pyb_i2c_recv);
/// \method mem_read(data, addr, memaddr, timeout=5000, use_16bit_addr=False)
/// \method mem_read(data, addr, memaddr, timeout=5000, addr_size=8)
///
/// Read from the memory of an I2C device:
///
......@@ -461,7 +461,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_i2c_recv_obj, 1, pyb_i2c_recv);
/// - `addr` is the I2C device address
/// - `memaddr` is the memory location within the I2C device
/// - `timeout` is the timeout in milliseconds to wait for the read
/// - `use_16bit_addr` selects width of memaddr: 8 or 16 bits
/// - `addr_size` selects width of memaddr: 8 or 16 bits
///
/// Returns the read data.
/// This is only valid in master mode.
......@@ -470,7 +470,7 @@ STATIC const mp_arg_t pyb_i2c_mem_read_args[] = {
{ MP_QSTR_addr, MP_ARG_REQUIRED | MP_ARG_INT, {.u_int = 0} },
{ MP_QSTR_memaddr, MP_ARG_REQUIRED | MP_ARG_INT, {.u_int = 0} },
{ MP_QSTR_timeout, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 5000} },
{ MP_QSTR_use_16bit_addr, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = false} },
{ MP_QSTR_addr_size, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 8} },
};
#define PYB_I2C_MEM_READ_NUM_ARGS MP_ARRAY_SIZE(pyb_i2c_mem_read_args)
......@@ -492,9 +492,9 @@ STATIC mp_obj_t pyb_i2c_mem_read(uint n_args, const mp_obj_t *args, mp_map_t *kw
// get the addresses
mp_uint_t i2c_addr = vals[1].u_int << 1;
mp_uint_t mem_addr = vals[2].u_int;
// determine width of mem_addr
// determine width of mem_addr; default is 8 bits, entering any other value gives 16 bit width
mp_uint_t mem_addr_size = I2C_MEMADD_SIZE_8BIT;
if (vals[4].u_bool) {
if (vals[4].u_int != 8) {
mem_addr_size = I2C_MEMADD_SIZE_16BIT;
}
......@@ -514,7 +514,7 @@ STATIC mp_obj_t pyb_i2c_mem_read(uint n_args, const mp_obj_t *args, mp_map_t *kw
}
STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_i2c_mem_read_obj, 1, pyb_i2c_mem_read);
/// \method mem_write(data, addr, memaddr, timeout=5000, use_16bit_addr=False)
/// \method mem_write(data, addr, memaddr, timeout=5000, addr_size=8)
///
/// Write to the memory of an I2C device:
///
......@@ -522,7 +522,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_i2c_mem_read_obj, 1, pyb_i2c_mem_read);
/// - `addr` is the I2C device address
/// - `memaddr` is the memory location within the I2C device
/// - `timeout` is the timeout in milliseconds to wait for the write
/// - `use_16bit_addr` selects width of memaddr: 8 or 16 bits
/// - `addr_size` selects width of memaddr: 8 or 16 bits
///
/// Returns `None`.
/// This is only valid in master mode.
......@@ -545,9 +545,9 @@ STATIC mp_obj_t pyb_i2c_mem_write(uint n_args, const mp_obj_t *args, mp_map_t *k
// get the addresses
mp_uint_t i2c_addr = vals[1].u_int << 1;
mp_uint_t mem_addr = vals[2].u_int;
// determine width of mem_addr
// determine width of mem_addr; default is 8 bits, entering any other value gives 16 bit width
mp_uint_t mem_addr_size = I2C_MEMADD_SIZE_8BIT;
if (vals[4].u_bool) {
if (vals[4].u_int != 8) {
mem_addr_size = I2C_MEMADD_SIZE_16BIT;
}
......
......@@ -161,7 +161,7 @@ Q(baudrate)
Q(gencall)
Q(data)
Q(memaddr)
Q(use_16bit_addr)
Q(addr_size)
Q(timeout)
Q(init)
Q(deinit)
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment