Commit 66db7bf6 authored by Damien George's avatar Damien George
Browse files

Merge pull request #206 from iabdalkader/master

Add Generic Feature Macros to mpconfigport
parents 0914371f 3c7e71fb
......@@ -803,7 +803,7 @@ soft_reset:
rt_store_attr(m, MP_QSTR_switch, (mp_obj_t)&pyb_switch_obj);
rt_store_attr(m, MP_QSTR_servo, rt_make_function_n(2, pyb_servo_set));
rt_store_attr(m, MP_QSTR_pwm, rt_make_function_n(2, pyb_pwm_set));
#if BOARD_HAS_MMA7660
#if MICROPY_HW_HAS_MMA7660
rt_store_attr(m, MP_QSTR_accel, (mp_obj_t)&pyb_mma_read_obj);
rt_store_attr(m, MP_QSTR_mma_read, (mp_obj_t)&pyb_mma_read_all_obj);
rt_store_attr(m, MP_QSTR_mma_mode, (mp_obj_t)&pyb_mma_write_mode_obj);
......@@ -923,7 +923,7 @@ soft_reset:
//pyb_usbh_init();
if (first_soft_reset) {
#if BOARD_HAS_MMA7660
#if MICROPY_HW_HAS_MMA7660
// MMA: init and reset address to zero
mma_init();
#endif
......@@ -954,7 +954,7 @@ soft_reset:
}
#if BOARD_HAS_MMA7660
#if MICROPY_HW_HAS_MMA7660
// HID example
if (0) {
uint8_t data[4];
......
......@@ -27,12 +27,63 @@ machine_float_t machine_sqrt(machine_float_t x);
#define PYBOARD4
//#define STM32F4DISC
#if defined(PYBOARD) || defined(PYBOARD4)
#define BOARD_HAS_MMA7660 (1)
#define BOARD_HAS_LIS3DSH (0)
#else
#define BOARD_HAS_MMA7660 (0)
#define BOARD_HAS_LIS3DSH (1)
#if defined (PYBOARD)
#define MICROPY_HW_HAS_SWITCH (1)
#define MICROPY_HW_HAS_SDCARD (1)
#define MICROPY_HW_HAS_MMA7660 (1)
#define MICROPY_HW_HAS_LIS3DSH (0)
#define MICROPY_HW_ENABLE_RNG (1)
#define MICROPY_HW_ENABLE_RTC (1)
#define MICROPY_HW_ENABLE_TIMER (1)
#define MICROPY_HW_ENABLE_SERVO (1)
#define MICROPY_HW_ENABLE_AUDIO (0)
#define USRSW_PORT (GPIOA)
#define USRSW_PIN (GPIO_Pin_13)
#define USRSW_PUPD (GPIO_PuPd_UP)
#define USRSW_EXTI_PIN (EXTI_PinSource13)
#define USRSW_EXTI_PORT (EXTI_PortSourceGPIOA)
#define USRSW_EXTI_LINE (EXTI_Line13)
#define USRSW_EXTI_IRQN (EXTI15_10_IRQn)
#define USRSW_EXTI_EDGE (EXTI_Trigger_Rising)
#elif defined (PYBOARD4)
#define MICROPY_HW_HAS_SWITCH (1)
#define MICROPY_HW_HAS_SDCARD (1)
#define MICROPY_HW_HAS_MMA7660 (1)
#define MICROPY_HW_HAS_LIS3DSH (0)
#define MICROPY_HW_ENABLE_RNG (1)
#define MICROPY_HW_ENABLE_RTC (1)
#define MICROPY_HW_ENABLE_TIMER (1)
#define MICROPY_HW_ENABLE_SERVO (1)
#define MICROPY_HW_ENABLE_AUDIO (0)
#define USRSW_PORT (GPIOB)
#define USRSW_PIN (GPIO_Pin_3)
#define USRSW_PUPD (GPIO_PuPd_UP)
#define USRSW_EXTI_PIN (EXTI_PinSource3)
#define USRSW_EXTI_PORT (EXTI_PortSourceGPIOB)
#define USRSW_EXTI_LINE (EXTI_Line3)
#define USRSW_EXTI_IRQN (EXTI15_10_IRQn)
#define USRSW_EXTI_EDGE (EXTI_Trigger_Rising)
#elif defined (STM32F4DISC)
#define MICROPY_HW_HAS_SWITCH (1)
#define MICROPY_HW_HAS_SDCARD (0)
#define MICROPY_HW_HAS_MMA7660 (0)
#define MICROPY_HW_HAS_LIS3DSH (1)
#define MICROPY_HW_ENABLE_RNG (1)
#define MICROPY_HW_ENABLE_RTC (1)
#define MICROPY_HW_ENABLE_TIMER (1)
#define MICROPY_HW_ENABLE_SERVO (0)
#define MICROPY_HW_ENABLE_AUDIO (0)
#define USRSW_PORT (GPIOA)
#define USRSW_PIN (GPIO_Pin_0)
#define USRSW_PUPD (GPIO_PuPd_NOPULL)
#define USRSW_EXTI_PIN (EXTI_PinSource0)
#define USRSW_EXTI_PORT (EXTI_PortSourceGPIOA)
#define USRSW_EXTI_LINE (EXTI_Line0)
#define USRSW_EXTI_IRQN (EXTI0_IRQn)
#define USRSW_EXTI_EDGE (EXTI_Trigger_Falling)
#endif
#define STM32F40_41xxx
......
......@@ -6,39 +6,11 @@
#include "misc.h"
#include "mpconfig.h"
#include "mpconfigport.h"
#include "qstr.h"
#include "obj.h"
#include "usrsw.h"
#if defined (PYBOARD)
#define USRSW_PORT (GPIOA)
#define USRSW_PIN (GPIO_Pin_13)
#define USRSW_PUPD (GPIO_PuPd_UP)
#define USRSW_EXTI_PIN (EXTI_PinSource13)
#define USRSW_EXTI_PORT (EXTI_PortSourceGPIOA)
#define USRSW_EXTI_LINE (EXTI_Line13)
#define USRSW_EXTI_IRQN (EXTI15_10_IRQn)
#define USRSW_EXTI_EDGE (EXTI_Trigger_Rising)
#elif defined (PYBOARD4)
#define USRSW_PORT (GPIOB)
#define USRSW_PIN (GPIO_Pin_3)
#define USRSW_PUPD (GPIO_PuPd_UP)
#define USRSW_EXTI_PIN (EXTI_PinSource3)
#define USRSW_EXTI_PORT (EXTI_PortSourceGPIOB)
#define USRSW_EXTI_LINE (EXTI_Line3)
#define USRSW_EXTI_IRQN (EXTI15_10_IRQn)
#define USRSW_EXTI_EDGE (EXTI_Trigger_Rising)
#elif defined (STM32F4DISC)
#define USRSW_PORT (GPIOA)
#define USRSW_PIN (GPIO_Pin_0)
#define USRSW_PUPD (GPIO_PuPd_NOPULL)
#define USRSW_EXTI_PIN (EXTI_PinSource0)
#define USRSW_EXTI_PORT (EXTI_PortSourceGPIOA)
#define USRSW_EXTI_LINE (EXTI_Line0)
#define USRSW_EXTI_IRQN (EXTI0_IRQn)
#define USRSW_EXTI_EDGE (EXTI_Trigger_Falling)
#endif
void switch_init(void) {
// make it an input with pull-up
GPIO_InitTypeDef GPIO_InitStructure;
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment