Commit 514b8290 authored by Paul Sokolovsky's avatar Paul Sokolovsky
Browse files

cc3200/README: (Re)add information about accessing REPL on serial.

parent 076b8046
......@@ -60,6 +60,19 @@ Once the software is running, you have two options to access the MicroPython REP
* Use your favourite telnet client with the following settings: **host = 192.168.1.1, port = 23.**
* Log in with **user = "micro" and password = "python"**
- Thru UART (serial).
* This is enabled by default in the standard configuration, for UART0 (speed 115200).
* For CC3200-LAUNCHXL, you will need to configure Linux `ftdi_sio` driver as described
in the [blog post](http://www.achanceofbrainshowers.com/blog/tech/2014/8/19/cc3200-development-under-linux/).
After that, connecting a board will create two `/dev/ttyUSB*` devices, a serial
console is available on the 2nd one (usually `/dev/ttyUSB1`).
* WiPy doesn't have onboard USB-UART converter, so you will need an external one,
connected to GPIO01 (Tx) and GPIO02 (Rx).
* Usage of UART port for REPL is controlled by MICROPY_STDIO_UART setting (and
is done at the high level, using a suitable call to `os.dupterm()` function
in boot.py, so you can override it at runtime regardless of MICROPY_STDIO_UART
setting).
The board has a small file system of 192K (WiPy) or 64K (Launchpad) located in the serial flash connected to the CC3200.
SD cards are also supported, you can connect any SD card and configure the pinout using the SD class API.
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment