Commit 4be44014 authored by Daniel Campora's avatar Daniel Campora
Browse files

cc3200: Reenable active interrupts when waking from suspended mode.

parent 0090c714
......@@ -50,5 +50,5 @@
.af = PIN_MODE_0, \
.strength = PIN_STRENGTH_4MA, \
.mode = GPIO_DIR_MODE_IN, \
.used = false \
.isused = false, \
}
......@@ -62,6 +62,7 @@ mp_obj_t mpcallback_new (mp_obj_t parent, mp_obj_t handler, const mp_cb_methods_
self->handler = handler;
self->parent = parent;
self->methods = (mp_cb_methods_t *)methods;
self->isenabled = true;
// remove any old callback if present
mpcallback_remove(self->parent);
mp_obj_list_append(&MP_STATE_PORT(mpcallback_obj_list), self);
......@@ -79,6 +80,16 @@ mpcallback_obj_t *mpcallback_find (mp_obj_t parent) {
return NULL;
}
void mpcallback_wake_all (void) {
// re-enable all active callback objects one by one
for (mp_uint_t i = 0; i < MP_STATE_PORT(mpcallback_obj_list).len; i++) {
mpcallback_obj_t *callback_obj = ((mpcallback_obj_t *)(MP_STATE_PORT(mpcallback_obj_list).items[i]));
if (callback_obj->isenabled) {
callback_obj->methods->enable(callback_obj->parent);
}
}
}
void mpcallback_remove (const mp_obj_t parent) {
mpcallback_obj_t *callback_obj;
if ((callback_obj = mpcallback_find(parent))) {
......@@ -158,6 +169,7 @@ MP_DEFINE_CONST_FUN_OBJ_KW(callback_init_obj, 1, callback_init);
STATIC mp_obj_t callback_enable (mp_obj_t self_in) {
mpcallback_obj_t *self = self_in;
self->methods->enable(self->parent);
self->isenabled = true;
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_1(callback_enable_obj, callback_enable);
......@@ -167,6 +179,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_1(callback_enable_obj, callback_enable);
STATIC mp_obj_t callback_disable (mp_obj_t self_in) {
mpcallback_obj_t *self = self_in;
self->methods->disable(self->parent);
self->isenabled = false;
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_1(callback_disable_obj, callback_disable);
......
......@@ -49,6 +49,7 @@ typedef struct {
mp_obj_t parent;
mp_obj_t handler;
mp_cb_methods_t *methods;
bool isenabled;
} mpcallback_obj_t;
/******************************************************************************
......@@ -63,6 +64,7 @@ extern const mp_obj_type_t pyb_callback_type;
void mpcallback_init0 (void);
mp_obj_t mpcallback_new (mp_obj_t parent, mp_obj_t handler, const mp_cb_methods_t *methods);
mpcallback_obj_t *mpcallback_find (mp_obj_t parent);
void mpcallback_wake_all (void);
void mpcallback_remove (const mp_obj_t parent);
void mpcallback_handler (mp_obj_t self_in);
uint mpcallback_translate_priority (uint priority);
......
......@@ -199,13 +199,10 @@ void pin_verify_af (uint af) {
void pin_config (pin_obj_t *self, uint af, uint mode, uint type, uint strength) {
// configure the pin in analog mode
self->af = af;
self->mode = mode;
self->type = type;
self->strength = strength;
self->af = af, self->mode = mode, self->type = type, self->strength = strength;
pin_obj_configure ((const pin_obj_t *)self);
// mark the pin as used
self->used = true;
self->isused = true;
// register it with the sleep module
pybsleep_add ((const mp_obj_t)self, (WakeUpCB_t)pin_obj_configure);
}
......
......@@ -42,7 +42,7 @@ typedef struct {
uint8_t af;
uint8_t strength;
uint8_t mode;
bool used;
bool isused;
} pin_obj_t;
extern const mp_obj_type_t pin_type;
......
......@@ -322,12 +322,12 @@ STATIC NORETURN void pybsleep_suspend_enter (void) {
nvic_reg_store->int_priority[i] = base_reg_addr[i];
}
// switch off the heartbeat led (this makes sure it will blink as soon as we wake up)
mperror_heartbeat_switch_off();
// park the gpio pins
pybsleep_iopark();
// turn-off the heartbeat led
mperror_heartbeat_switch_off();
// store the cpu registers
sleep_store();
......@@ -384,12 +384,15 @@ void pybsleep_suspend_exit (void) {
// ungate the clock to the shared spi bus
MAP_PRCMPeripheralClkEnable(PRCM_SSPI, PRCM_RUN_MODE_CLK | PRCM_SLP_MODE_CLK);
// reinitialize simplelink's bus
// reinitialize simplelink's interface
sl_IfOpen (NULL, 0);
// restore the configuration of all active peripherals
pybsleep_obj_wakeup();
// reconfigure all the previously enabled interrupts
mpcallback_wake_all();
// trigger a sw interrupt
MAP_IntPendSet(INT_PRCM);
......@@ -450,11 +453,11 @@ STATIC void pybsleep_iopark (void) {
#endif
break;
default:
if (!pin->used) {
// enable the pull-down in unused pins
// enable a weak pull-down if the pin is unused
if (!pin->isused) {
MAP_PinConfigSet(pin->pin_num, pin->strength, PIN_TYPE_STD_PD);
}
// make the pin an input
// make it an input
MAP_PinDirModeSet(pin->pin_num, PIN_DIR_MODE_IN);
break;
}
......@@ -610,8 +613,9 @@ STATIC mp_obj_t pyb_sleep_hibernate (mp_obj_t self_in) {
}
}
wlan_stop(SL_STOP_TIMEOUT);
mperror_heartbeat_switch_off();
pybsleep_flash_powerdown();
// must be done just before entering hibernate mode
pybsleep_iopark();
MAP_PRCMHibernateEnter();
return mp_const_none;
}
......
......@@ -346,7 +346,7 @@ STATIC void pyb_uart_print(void (*print)(void *env, const char *fmt, ...), void
}
}
/// \method init(baudrate, bits=8, parity=None, stop=1, *, timeout=1000, timeout_char=0, read_buf_len=128)
/// \method init(baudrate, bits=8, parity=None, stop=1, *, timeout=1000, timeout_char=0)
///
/// Initialise the UART bus with the given parameters:
///
......
......@@ -110,7 +110,7 @@ static telnet_data_t telnet_data;
static const char* telnet_welcome_msg = "Micro Python " MICROPY_GIT_TAG " on " MICROPY_BUILD_DATE "; " MICROPY_HW_BOARD_NAME " with " MICROPY_HW_MCU_NAME "\r\n";
static const char* telnet_request_user = "Login as:";
static const char* telnet_request_password = "Password:";
static const char* telnet_invalid_loggin = "\r\nInvalid credentials, try again\r\n";
static const char* telnet_invalid_loggin = "\r\nInvalid credentials, try again.\r\n";
static const char* telnet_loggin_success = "\r\nLogin succeeded!\r\nType \"help()\" for more information.\r\n";
static const uint8_t telnet_options_user[] = // IAC WONT ECHO IAC WONT SUPPRESS_GO_AHEAD IAC WILL LINEMODE
{ 255, 252, 1, 255, 252, 3, 255, 251, 34 };
......@@ -217,10 +217,8 @@ void telnet_run (void) {
break;
case E_TELNET_STE_SUB_LOGGIN_SUCCESS:
if (E_TELNET_RESULT_OK == telnet_send_non_blocking((void *)telnet_loggin_success, strlen(telnet_loggin_success))) {
// clear the current line
// clear the current line and force the prompt
telnet_reset_buffer();
// fake an "enter" key pressed to display the prompt
telnet_data.rxBuffer[telnet_data.rxWindex++] = '\r';
telnet_data.state= E_TELNET_STE_LOGGED_IN;
}
default:
......@@ -478,7 +476,10 @@ static void telnet_reset (void) {
}
static void telnet_reset_buffer (void) {
// erase any characters present in the current line
memset (telnet_data.rxBuffer, '\b', TELNET_RX_BUFFER_SIZE / 2);
telnet_data.rxWindex = TELNET_RX_BUFFER_SIZE / 2;
// fake an "enter" key pressed to display the prompt
telnet_data.rxBuffer[telnet_data.rxWindex++] = '\r';
}
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment