stmhal: Reinstate CC3000 driver from old stm/ port.

It's not enabled by default because it doesn't fully work.  It can
connect to an AP, get an IP address and do a host-lookup, but not yet do
send or recv on a socket.

stmhal/Makefile

@@ -11,7 +11,7 @@ HAL_DIR=hal
 USBDEV_DIR=usbdev
 #USBHOST_DIR=usbhost
 FATFS_DIR=fatfs
-#CC3K_DIR=cc3k
+CC3K_DIR=cc3k
 DFU=../tools/dfu.py
 
 CROSS_COMPILE = arm-none-eabi-
@@ -25,7 +25,7 @@ INC += -I$(HAL_DIR)/inc
 INC += -I$(USBDEV_DIR)/core/inc -I$(USBDEV_DIR)/class/cdc_msc_hid/inc
 #INC += -I$(USBHOST_DIR)
 INC += -I$(FATFS_DIR)/src
-#INC += -I$(CC3K_DIR)
+INC += -I$(CC3K_DIR)
 
 CFLAGS_CORTEX_M4 = -mthumb -mtune=cortex-m4 -mabi=aapcs-linux -mcpu=cortex-m4 -mfpu=fpv4-sp-d16 -mfloat-abi=hard -fsingle-precision-constant -Wdouble-promotion
 CFLAGS = $(INC) -Wall -Werror -ansi -std=gnu99 $(CFLAGS_CORTEX_M4) $(COPT)
@@ -100,8 +100,7 @@ SRC_C = \
 	servo.c \
 	dac.c \
 	adc.c \
-
-#	pybwlan.c \
+	pybwlan.c \
 
 SRC_S = \
 	startup_stm32f40xx.s \
@@ -185,7 +184,7 @@ OBJ += $(addprefix $(BUILD)/, $(SRC_S:.s=.o))
 OBJ += $(addprefix $(BUILD)/, $(SRC_HAL:.c=.o))
 OBJ += $(addprefix $(BUILD)/, $(SRC_USBDEV:.c=.o))
 OBJ += $(addprefix $(BUILD)/, $(SRC_FATFS:.c=.o))
-#OBJ += $(addprefix $(BUILD)/, $(SRC_CC3K:.c=.o))
+OBJ += $(addprefix $(BUILD)/, $(SRC_CC3K:.c=.o))
 OBJ += $(BUILD)/pins_$(BOARD).o
 
 all: $(BUILD)/flash.dfu

stmhal/boards/PYBV10/mpconfigboard.h

@@ -7,7 +7,7 @@
 #define MICROPY_HW_HAS_MMA7660      (1)
 #define MICROPY_HW_HAS_LIS3DSH      (0)
 #define MICROPY_HW_HAS_LCD          (1)
-#define MICROPY_HW_HAS_WLAN         (0)
+#define MICROPY_HW_HAS_WLAN         (1)
 #define MICROPY_HW_ENABLE_RNG       (1)
 #define MICROPY_HW_ENABLE_RTC       (1)
 #define MICROPY_HW_ENABLE_TIMER     (1)

stmhal/cc3k/cc3000_common.c

+/*****************************************************************************
+*
+*  cc3000_common.c.c  - CC3000 Host Driver Implementation.
+*  Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+*
+* Adapted for use with the Arduino/AVR by KTOWN (Kevin Townsend) 
+* & Limor Fried for Adafruit Industries
+* This library works with the Adafruit CC3000 breakout 
+*	----> https://www.adafruit.com/products/1469
+* Adafruit invests time and resources providing this open source code,
+* please support Adafruit and open-source hardware by purchasing
+* products from Adafruit!
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the   
+*    distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+*****************************************************************************/
+//*****************************************************************************
+//
+//! \addtogroup common_api
+//! @{
+//
+//*****************************************************************************
+/******************************************************************************
+ *
+ * Include files
+ *
+ *****************************************************************************/
+#include <stdint.h>
+
+#include "cc3000_common.h"
+#include "socket.h"
+#include "wlan.h"
+#include "evnt_handler.h"
+#include "ccdebug.h"
+
+//*****************************************************************************
+//
+//!  __error__
+//!
+//!  @param  pcFilename - file name, where error occurred
+//!  @param  ulLine     - line number, where error occurred
+//!
+//!  @return none
+//!
+//!  @brief stub function for ASSERT macro
+//
+//*****************************************************************************
+void
+__error__(char *pcFilename, unsigned long ulLine)
+{
+    //TODO full up function
+}
+
+
+
+//*****************************************************************************
+//
+//!  UINT32_TO_STREAM_f
+//!
+//!  @param  p       pointer to the new stream
+//!  @param  u32     pointer to the 32 bit
+//!
+//!  @return               pointer to the new stream
+//!
+//!  @brief                This function is used for copying 32 bit to stream
+//!						   while converting to little endian format.
+//
+//*****************************************************************************
+
+uint8_t* UINT32_TO_STREAM_f (uint8_t *p, uint32_t u32)
+{
+	*(p)++ = (uint8_t)(u32);
+	*(p)++ = (uint8_t)((u32) >> 8);
+	*(p)++ = (uint8_t)((u32) >> 16);
+	*(p)++ = (uint8_t)((u32) >> 24);
+	return p;
+}
+
+//*****************************************************************************
+//
+//!  UINT16_TO_STREAM_f
+//!
+//!  @param  p       pointer to the new stream
+//!  @param  u32     pointer to the 16 bit
+//!
+//!  @return               pointer to the new stream
+//!
+//!  @brief               This function is used for copying 16 bit to stream
+//!                       while converting to little endian format.
+//
+//*****************************************************************************
+
+uint8_t* UINT16_TO_STREAM_f (uint8_t *p, uint16_t u16)
+{
+	*(p)++ = (uint8_t)(u16);
+	*(p)++ = (uint8_t)((u16) >> 8);
+	return p;
+}
+
+//*****************************************************************************
+//
+//!  STREAM_TO_UINT16_f
+//!
+//!  @param  p          pointer to the stream
+//!  @param  offset     offset in the stream
+//!
+//!  @return               pointer to the new 16 bit
+//!
+//!  @brief               This function is used for copying received stream to
+//!                       16 bit in little endian format.
+//
+//*****************************************************************************
+
+uint16_t STREAM_TO_UINT16_f(char* cp, uint16_t offset)
+{
+  uint8_t *p = (uint8_t *)cp;
+  /*
+  DEBUGPRINT_F("Stream2u16: ");
+  DEBUGPRINT_HEX(cp[offset+1]);
+  DEBUGPRINT_F(" + ");
+  DEBUGPRINT_HEX(cp[offset]);
+  DEBUGPRINT_F("\n\r");
+  */
+
+  return (uint16_t)((uint16_t)
+		    ((uint16_t)(*(p + offset + 1)) << 8) +
+		    (uint16_t)(*(p + offset)));
+}
+
+//*****************************************************************************
+//
+//!  STREAM_TO_UINT32_f
+//!
+//!  @param  p          pointer to the stream
+//!  @param  offset     offset in the stream
+//!
+//!  @return               pointer to the new 32 bit
+//!
+//!  @brief               This function is used for copying received stream to
+//!                       32 bit in little endian format.
+//
+//*****************************************************************************
+
+uint32_t STREAM_TO_UINT32_f(char * cp, uint16_t offset)
+{
+  uint8_t *p = (uint8_t *)cp;
+  
+  /*
+  DEBUGPRINT_F("\tStream2u32: ");
+  DEBUGPRINT_HEX(cp[offset+3]);  DEBUGPRINT_F(" + ");
+  DEBUGPRINT_HEX(cp[offset+2]);  DEBUGPRINT_F(" + ");
+  DEBUGPRINT_HEX(cp[offset+1]);  DEBUGPRINT_F(" + ");
+  DEBUGPRINT_HEX(cp[offset]);
+  DEBUGPRINT_F("\n\r");
+  */
+
+  return (uint32_t)((uint32_t)((uint32_t)
+	(*(p + offset + 3)) << 24) + (uint32_t)((uint32_t)
+	(*(p + offset + 2)) << 16) + (uint32_t)((uint32_t)
+	(*(p + offset + 1)) << 8) + (uint32_t)(*(p + offset)));
+}
+
+
+
+//*****************************************************************************
+//
+// Close the Doxygen group.
+//! @}
+//
+//*****************************************************************************

stmhal/cc3k/cc3000_common.h

+/*****************************************************************************
+*
+*  cc3000_common.h  - CC3000 Host Driver Implementation.
+*  Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+*
+* Adapted for use with the Arduino/AVR by KTOWN (Kevin Townsend) 
+* & Limor Fried for Adafruit Industries
+* This library works with the Adafruit CC3000 breakout 
+*	----> https://www.adafruit.com/products/1469
+* Adafruit invests time and resources providing this open source code,
+* please support Adafruit and open-source hardware by purchasing
+* products from Adafruit!
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the   
+*    distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+*****************************************************************************/
+#ifndef __COMMON_H__
+#define __COMMON_H__
+
+//******************************************************************************
+// Include files
+//******************************************************************************
+//#include <stdlib.h>
+//#include <errno.h>
+//#include <stdint.h>
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+//*****************************************************************************
+//                  ERROR CODES
+//*****************************************************************************
+#define ESUCCESS        0
+#define EFAIL          -1
+#define EERROR          EFAIL
+
+//*****************************************************************************
+//                  COMMON DEFINES
+//*****************************************************************************
+#define ERROR_SOCKET_INACTIVE   -57 
+
+#define WLAN_ENABLE      (1)   
+#define WLAN_DISABLE     (0)
+
+#define	MAC_ADDR_LEN	(6)
+
+#define	SP_PORTION_SIZE	(32)
+
+// #define CC3000_TINY_DRIVER
+  
+/*Defines for minimal and maximal RX buffer size. This size includes the spi 
+  header and hci header.
+  The maximal buffer size derives from:
+    MTU + HCI header + SPI header + sendto() agrs size
+  The minimum buffer size derives from:
+    HCI header + SPI header + max args size
+
+  This buffer is used for receiving events and data.
+  The packet can not be longer than MTU size and CC3000 does not support 
+  fragmentation. Note that the same buffer is used for reception of the data 
+  and events from CC3000. That is why the minimum is defined. 
+  The calculation for the actual size of buffer for reception is:
+  Given the maximal data size MAX_DATA that is expected to be received by
+  application, the required buffer is:
+  Using recv() or recvfrom():
+ 
+    max(CC3000_MINIMAL_RX_SIZE, MAX_DATA + HEADERS_SIZE_DATA + fromlen
+    + ucArgsize + 1)
+ 
+  Using gethostbyname() with minimal buffer size will limit the host name
+  returned to 99 bytes only.
+  The 1 is used for the overrun detection 
+
+  Buffer size increased to 130 following the add_profile() with WEP security
+  which requires TX buffer size of 130 bytes: 
+  HEADERS_SIZE_EVNT + WLAN_ADD_PROFILE_WEP_PARAM_LEN + MAX SSID LEN + 4 * MAX KEY LEN = 130
+  MAX SSID LEN = 32 
+  MAX SSID LEN = 13 (with add_profile only ascii key setting is supported, 
+  therfore maximum key size is 13)
+*/
+
+#define CC3000_MINIMAL_RX_SIZE      (130 + 1)
+#define CC3000_MAXIMAL_RX_SIZE      (1519 + 1)
+
+/*Defines for minimal and maximal TX buffer size.
+  This buffer is used for sending events and data.
+  The packet can not be longer than MTU size and CC3000 does not support 
+  fragmentation. Note that the same buffer is used for transmission of the data
+  and commands. That is why the minimum is defined.
+  The calculation for the actual size of buffer for transmission is:
+  Given the maximal data size MAX_DATA, the required buffer is:
+  Using Sendto():
+ 
+   max(CC3000_MINIMAL_TX_SIZE, MAX_DATA + SPI_HEADER_SIZE
+   + SOCKET_SENDTO_PARAMS_LEN + SIMPLE_LINK_HCI_DATA_HEADER_SIZE + 1)
+ 
+  Using Send():
+ 
+   max(CC3000_MINIMAL_TX_SIZE, MAX_DATA + SPI_HEADER_SIZE
+   + HCI_CMND_SEND_ARG_LENGTH + SIMPLE_LINK_HCI_DATA_HEADER_SIZE + 1)
+ 
+  The 1 is used for the overrun detection */ 
+
+#define	CC3000_MINIMAL_TX_SIZE      (130 + 1)  
+#define	CC3000_MAXIMAL_TX_SIZE      (1519 + 1)
+
+//TX and RX buffer sizes, allow to receive and transmit maximum data at length 8.
+#ifdef CC3000_TINY_DRIVER
+#define TINY_CC3000_MAXIMAL_RX_SIZE 44
+#define TINY_CC3000_MAXIMAL_TX_SIZE 59
+#endif
+
+/*In order to determine your preferred buffer size, 
+  change CC3000_MAXIMAL_RX_SIZE and CC3000_MAXIMAL_TX_SIZE to a value between
+  the minimal and maximal specified above. 
+  Note that the buffers are allocated by SPI.
+  In case you change the size of those buffers, you might need also to change
+  the linker file, since for example on MSP430 FRAM devices the buffers are
+  allocated in the FRAM section that is allocated manually and not by IDE.
+*/
+  
+#ifndef CC3000_TINY_DRIVER
+  
+	#define CC3000_RX_BUFFER_SIZE   (CC3000_MINIMAL_RX_SIZE)
+	#define CC3000_TX_BUFFER_SIZE   (CC3000_MINIMAL_TX_SIZE)
+  
+//if defined TINY DRIVER we use smaller RX and TX buffer in order to minimize RAM consumption
+#else
+	#define CC3000_RX_BUFFER_SIZE   (TINY_CC3000_MAXIMAL_RX_SIZE)
+	#define CC3000_TX_BUFFER_SIZE   (TINY_CC3000_MAXIMAL_TX_SIZE)
+
+#endif  
+
+//*****************************************************************************
+//                  Compound Types
+//*****************************************************************************
+#ifdef __AVR__
+typedef unsigned long time_t;  /* KTown: Updated to be compatible with Arduino Time.h */
+#else
+typedef long time_t;
+#endif
+typedef unsigned long clock_t;
+typedef long suseconds_t;
+
+typedef struct timeval timeval;
+
+struct timeval 
+{
+    time_t         tv_sec;                  /* seconds */
+    suseconds_t    tv_usec;                 /* microseconds */
+};
+
+typedef char *(*tFWPatches)(unsigned long *usLength);
+
+typedef char *(*tDriverPatches)(unsigned long *usLength);
+
+typedef char *(*tBootLoaderPatches)(unsigned long *usLength);
+
+typedef void (*tWlanCB)(long event_type, char * data, unsigned char length );
+
+typedef long (*tWlanReadInteruptPin)(void);
+
+typedef void (*tWlanInterruptEnable)(void);
+
+typedef void (*tWlanInterruptDisable)(void);
+
+typedef void (*tWriteWlanPin)(unsigned char val);
+
+typedef struct
+{
+	unsigned short	 usRxEventOpcode;
+	unsigned short	 usEventOrDataReceived;
+	unsigned char 	*pucReceivedData;
+	unsigned char 	*pucTxCommandBuffer;
+
+	tFWPatches 			sFWPatches;
+	tDriverPatches 		sDriverPatches;
+	tBootLoaderPatches 	sBootLoaderPatches;
+	tWlanCB	 			sWlanCB;
+    tWlanReadInteruptPin  ReadWlanInterruptPin;
+    tWlanInterruptEnable  WlanInterruptEnable;
+    tWlanInterruptDisable WlanInterruptDisable;
+    tWriteWlanPin         WriteWlanPin;
+
+	signed long		 slTransmitDataError;
+	unsigned short	 usNumberOfFreeBuffers;
+	unsigned short	 usSlBufferLength;
+	unsigned short	 usBufferSize;
+	unsigned short	 usRxDataPending;
+
+	unsigned long    NumberOfSentPackets;
+	unsigned long    NumberOfReleasedPackets;
+
+	unsigned char	 InformHostOnTxComplete;
+}sSimplLinkInformation;
+
+extern volatile sSimplLinkInformation tSLInformation;
+
+
+//*****************************************************************************
+// Prototypes for the APIs.
+//*****************************************************************************
+
+
+
+//*****************************************************************************
+//
+//!  SimpleLinkWaitEvent
+//!
+//!  @param  usOpcode      command operation code
+//!  @param  pRetParams    command return parameters
+//!
+//!  @return               none
+//!
+//!  @brief                Wait for event, pass it to the hci_event_handler and
+//!                        update the event opcode in a global variable.
+//
+//*****************************************************************************
+
+extern void SimpleLinkWaitEvent(unsigned short usOpcode, void *pRetParams);
+
+//*****************************************************************************
+//
+//!  SimpleLinkWaitData
+//!
+//!  @param  pBuf       data buffer
+//!  @param  from       from information
+//!  @param  fromlen	  from information length
+//!
+//!  @return               none
+//!
+//!  @brief                Wait for data, pass it to the hci_event_handler
+//! 					   and update in a global variable that there is 
+//!						   data to read.
+//
+//*****************************************************************************
+
+extern void SimpleLinkWaitData(uint8_t *pBuf, uint8_t *from, uint8_t *fromlen);
+
+//*****************************************************************************
+//
+//!  UINT32_TO_STREAM_f
+//!
+//!  \param  p       pointer to the new stream
+//!  \param  u32     pointer to the 32 bit
+//!
+//!  \return               pointer to the new stream
+//!
+//!  \brief                This function is used for copying 32 bit to stream
+//!						   while converting to little endian format.
+//
+//*****************************************************************************
+
+extern uint8_t* UINT32_TO_STREAM_f (uint8_t *p, uint32_t u32);
+
+//*****************************************************************************
+//
+//!  UINT16_TO_STREAM_f
+//!
+//!  \param  p       pointer to the new stream
+//!  \param  u32     pointer to the 16 bit
+//!
+//!  \return               pointer to the new stream
+//!
+//!  \brief               This function is used for copying 16 bit to stream 
+//!                       while converting to little endian format.
+//
+//*****************************************************************************
+
+extern uint8_t* UINT16_TO_STREAM_f (uint8_t *p, uint16_t u16);
+
+//*****************************************************************************
+//
+//!  STREAM_TO_UINT16_f
+//!
+//!  \param  p          pointer to the stream
+//!  \param  offset     offset in the stream
+//!
+//!  \return               pointer to the new 16 bit
+//!
+//!  \brief               This function is used for copying received stream to 
+//!                       16 bit in little endian format.
+//
+//*****************************************************************************
+
+extern uint16_t STREAM_TO_UINT16_f(char* p, uint16_t offset);
+
+//*****************************************************************************
+//
+//!  STREAM_TO_UINT32_f
+//!
+//!  \param  p          pointer to the stream
+//!  \param  offset     offset in the stream
+//!
+//!  \return               pointer to the new 32 bit
+//!
+//!  \brief               This function is used for copying received stream to
+//!                       32 bit in little endian format.
+//
+//*****************************************************************************
+
+extern uint32_t STREAM_TO_UINT32_f(char* p, uint16_t offset);
+
+
+//*****************************************************************************
+//
+//!  cc3k_int_poll
+//!
+//!  \brief               checks if the interrupt pin is low
+//!                       just in case the hardware missed a falling edge
+//!                       function is in ccspi.cpp
+//
+//*****************************************************************************
+
+extern void cc3k_int_poll();
+
+
+
+//*****************************************************************************
+//                    COMMON MACROs
+//*****************************************************************************
+
+
+//This macro is used for copying 8 bit to stream while converting to little endian format.
+#define UINT8_TO_STREAM(_p, _val)	{*(_p)++ = (_val);}
+//This macro is used for copying 16 bit to stream while converting to little endian format.
+#define UINT16_TO_STREAM(_p, _u16)	(UINT16_TO_STREAM_f(_p, _u16))
+//This macro is used for copying 32 bit to stream while converting to little endian format.
+#define UINT32_TO_STREAM(_p, _u32)	(UINT32_TO_STREAM_f(_p, _u32))
+//This macro is used for copying a specified value length bits (l) to stream while converting to little endian format.
+#define ARRAY_TO_STREAM(p, a, l) 	{register short _i; for (_i = 0; _i < l; _i++) *(p)++ = ((uint8_t *) a)[_i];}
+//This macro is used for copying received stream to 8 bit in little endian format.
+#define STREAM_TO_UINT8(_p, _offset, _u8)	{_u8 = (uint8_t)(*(_p + _offset));}
+//This macro is used for copying received stream to 16 bit in little endian format.
+#define STREAM_TO_UINT16(_p, _offset, _u16)	{_u16 = STREAM_TO_UINT16_f(_p, _offset);}
+//This macro is used for copying received stream to 32 bit in little endian format.
+#define STREAM_TO_UINT32(_p, _offset, _u32)	{_u32 = STREAM_TO_UINT32_f(_p, _offset);}
+#define STREAM_TO_STREAM(p, a, l) 	{register short _i; for (_i = 0; _i < l; _i++) *(a)++= ((uint8_t *) p)[_i];}
+
+
+
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef  __cplusplus
+}
+#endif // __cplusplus
+
+#endif // __COMMON_H__

stmhal/cc3k/ccdebug.h

+/**************************************************************************/
+/*!
+  @file     Adafruit_CC3000.cpp
+  @author   KTOWN (Kevin Townsend for Adafruit Industries)
+	@license  BSD (see license.txt)
+