Commit 495da156 authored by Tobias Badertscher's avatar Tobias Badertscher Committed by Damien George
Browse files

stmhal: L4: Add support for external interrupts/events.

The L4 MCU supports 40 Events/IRQs lines of the type configurable and
direct.  But this L4 port only supports configurable line types which are
already supported by uPy.  For details see page 330 of RM0351, Rev 1.

The USB_FS_WAKUP event is a direct type and there is no support for it.
parent 067fb2da
......@@ -90,8 +90,16 @@
// register in an atomic fashion by using bitband addressing.
#define EXTI_MODE_BB(mode, line) (*(__IO uint32_t *)(PERIPH_BB_BASE + ((EXTI_OFFSET + (mode)) * 32) + ((line) * 4)))
#if defined(MCU_SERIES_L4)
// The L4 MCU supports 40 Events/IRQs lines of the type configurable and direct.
// Here we only support configurable line types. Details, see page 330 of RM0351, Rev 1.
// The USB_FS_WAKUP event is a direct type and there is no support for it.
#define EXTI_Mode_Interrupt offsetof(EXTI_TypeDef, IMR1)
#define EXTI_Mode_Event offsetof(EXTI_TypeDef, EMR1)
#else
#define EXTI_Mode_Interrupt offsetof(EXTI_TypeDef, IMR)
#define EXTI_Mode_Event offsetof(EXTI_TypeDef, EMR)
#endif
#define EXTI_SWIER_BB(line) (*(__IO uint32_t *)(PERIPH_BB_BASE + ((EXTI_OFFSET + offsetof(EXTI_TypeDef, SWIER)) * 32) + ((line) * 4)))
......@@ -108,13 +116,26 @@ STATIC uint32_t pyb_extint_mode[EXTI_NUM_VECTORS];
#if !defined(OTG_HS_WKUP_IRQn)
#define OTG_HS_WKUP_IRQn 76 // Some MCUs don't have HS, but we want a value to put in our table
#endif
#if !defined(OTG_FS_WKUP_IRQn)
#define OTG_FS_WKUP_IRQn 42 // Some MCUs don't have FS IRQ, but we want a value to put in our table
#endif
STATIC const uint8_t nvic_irq_channel[EXTI_NUM_VECTORS] = {
EXTI0_IRQn, EXTI1_IRQn, EXTI2_IRQn, EXTI3_IRQn, EXTI4_IRQn,
EXTI9_5_IRQn, EXTI9_5_IRQn, EXTI9_5_IRQn, EXTI9_5_IRQn, EXTI9_5_IRQn,
EXTI15_10_IRQn, EXTI15_10_IRQn, EXTI15_10_IRQn, EXTI15_10_IRQn, EXTI15_10_IRQn,
EXTI15_10_IRQn, PVD_IRQn, RTC_Alarm_IRQn, OTG_FS_WKUP_IRQn, ETH_WKUP_IRQn,
OTG_HS_WKUP_IRQn, TAMP_STAMP_IRQn, RTC_WKUP_IRQn
EXTI15_10_IRQn,
#if defined(MCU_SERIES_L4)
PVD_PVM_IRQn,
#else
PVD_IRQn,
#endif
RTC_Alarm_IRQn,
OTG_FS_WKUP_IRQn,
ETH_WKUP_IRQn,
OTG_HS_WKUP_IRQn,
TAMP_STAMP_IRQn,
RTC_WKUP_IRQn,
};
// Set override_callback_obj to true if you want to unconditionally set the
......@@ -230,7 +251,11 @@ void extint_swint(uint line) {
if (line >= EXTI_NUM_VECTORS) {
return;
}
#if defined(MCU_SERIES_L4)
EXTI->SWIER1 = (1 << line);
#else
EXTI->SWIER = (1 << line);
#endif
}
/// \method line()
......@@ -273,12 +298,27 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_1(extint_obj_swint_obj, extint_obj_swint);
/// \classmethod regs()
/// Dump the values of the EXTI registers.
STATIC mp_obj_t extint_regs(void) {
#if defined(MCU_SERIES_L4)
printf("EXTI_IMR1 %08lx\n", EXTI->IMR1);
printf("EXTI_IMR2 %08lx\n", EXTI->IMR2);
printf("EXTI_EMR1 %08lx\n", EXTI->EMR1);
printf("EXTI_EMR2 %08lx\n", EXTI->EMR2);
printf("EXTI_RTSR1 %08lx\n", EXTI->RTSR1);
printf("EXTI_RTSR2 %08lx\n", EXTI->RTSR2);
printf("EXTI_FTSR1 %08lx\n", EXTI->FTSR1);
printf("EXTI_FTSR2 %08lx\n", EXTI->FTSR2);
printf("EXTI_SWIER1 %08lx\n", EXTI->SWIER1);
printf("EXTI_SWIER2 %08lx\n", EXTI->SWIER2);
printf("EXTI_PR1 %08lx\n", EXTI->PR1);
printf("EXTI_PR2 %08lx\n", EXTI->PR2);
#else
printf("EXTI_IMR %08lx\n", EXTI->IMR);
printf("EXTI_EMR %08lx\n", EXTI->EMR);
printf("EXTI_RTSR %08lx\n", EXTI->RTSR);
printf("EXTI_FTSR %08lx\n", EXTI->FTSR);
printf("EXTI_SWIER %08lx\n", EXTI->SWIER);
printf("EXTI_PR %08lx\n", EXTI->PR);
#endif
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_0(extint_regs_fun_obj, extint_regs);
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment