Commit 45a8cc8f authored by Paul Sokolovsky's avatar Paul Sokolovsky
Browse files

cc3200: make: Rename "deploy" target to "deploy-ota".

There should be target to deploy uPy over wired (UART) connection, and
wired and OTA targets should be named differently.
parent 514b8290
......@@ -40,15 +40,6 @@ there. Make sure to use a **v4.1 (or higer) LAUNCHXL board** when trying this po
- Flash the latest service pack (servicepack_1.0.0.10.0.bin) using the "Service Pack Update" button.
- Close CCS_Uniflash, remove the SOP2 jumper and reset the board.
## Updating the board to with new software version
- Make sure the board is running and connected to the same network as the computer.
```bash
make BTARGET=application BTYPE=release BOARD=LAUNCHXL WIPY_IP=192.168.1.1 WIPY_USER=micro WIPY_PWD=python deploy
```
If `WIPY_IP`, `WIPY_USER` or `WIPY_PWD` are omitted the default values (the ones shown above) will be used.
## Playing with MicroPython and the CC3200:
Once the software is running, you have two options to access the MicroPython REPL:
......@@ -97,6 +88,16 @@ import machine
machine.reset()
```
There's a script which automates this process from the host side:
- Make sure the board is running and connected to the same network as the computer.
```bash
make BTARGET=application BTYPE=release BOARD=LAUNCHXL WIPY_IP=192.168.1.1 WIPY_USER=micro WIPY_PWD=python deploy-ota
```
If `WIPY_IP`, `WIPY_USER` or `WIPY_PWD` are omitted the default values (the ones shown above) will be used.
### Note regarding FileZilla:
Do not use the quick connect button, instead, open the site manager and create a new configuration. In the "General" tab make
......
......@@ -206,9 +206,9 @@ WIPY_PWD ?= 'python'
all: $(BUILD)/mcuimg.bin
.PHONY: deploy
.PHONY: deploy-ota
deploy: $(BUILD)/mcuimg.bin
deploy-ota: $(BUILD)/mcuimg.bin
$(ECHO) "Writing $< to the board"
$(Q)$(PYTHON) $(UPDATE_WIPY) --verify --ip $(WIPY_IP) --user $(WIPY_USER) --password $(WIPY_PWD) --file $<
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment