Fix Feature Macro Prefix

stm/main.c

@@ -803,7 +803,7 @@ soft_reset:
         rt_store_attr(m, MP_QSTR_switch, (mp_obj_t)&pyb_switch_obj);
         rt_store_attr(m, MP_QSTR_servo, rt_make_function_n(2, pyb_servo_set));
         rt_store_attr(m, MP_QSTR_pwm, rt_make_function_n(2, pyb_pwm_set));
-#if HAVE_MMA7660
+#if MICROPY_HW_HAS_MMA7660
         rt_store_attr(m, MP_QSTR_accel, (mp_obj_t)&pyb_mma_read_obj);
         rt_store_attr(m, MP_QSTR_mma_read, (mp_obj_t)&pyb_mma_read_all_obj);
         rt_store_attr(m, MP_QSTR_mma_mode, (mp_obj_t)&pyb_mma_write_mode_obj);
@@ -923,7 +923,7 @@ soft_reset:
     //pyb_usbh_init();
 
     if (first_soft_reset) {
-#if HAVE_MMA7660
+#if MICROPY_HW_HAS_MMA7660
         // MMA: init and reset address to zero
         mma_init();
 #endif
@@ -954,7 +954,7 @@ soft_reset:
     }
 
 
-#if HAVE_MMA7660
+#if MICROPY_HW_HAS_MMA7660
     // HID example
     if (0) {
         uint8_t data[4];

stm/mpconfigport.h

@@ -28,15 +28,15 @@ machine_float_t machine_sqrt(machine_float_t x);
 //#define STM32F4DISC
 
 #if defined (PYBOARD)
-    #define HAVE_SWITCH       (1)
-    #define HAVE_SDCARD       (1)
-    #define HAVE_MMA7660      (1)
-    #define HAVE_LIS3DSH      (0)
-    #define ENABLE_RNG        (1)
-    #define ENABLE_RTC        (1)
-    #define ENABLE_TIMER      (1)
-    #define ENABLE_SERVO      (1)
-    #define ENABLE_AUDIO      (0)
+    #define MICROPY_HW_HAS_SWITCH       (1)
+    #define MICROPY_HW_HAS_SDCARD       (1)
+    #define MICROPY_HW_HAS_MMA7660      (1)
+    #define MICROPY_HW_HAS_LIS3DSH      (0)
+    #define MICROPY_HW_ENABLE_RNG       (1)
+    #define MICROPY_HW_ENABLE_RTC       (1)
+    #define MICROPY_HW_ENABLE_TIMER     (1)
+    #define MICROPY_HW_ENABLE_SERVO     (1)
+    #define MICROPY_HW_ENABLE_AUDIO     (0)
 
     #define USRSW_PORT          (GPIOA)
     #define USRSW_PIN           (GPIO_Pin_13)
@@ -47,15 +47,15 @@ machine_float_t machine_sqrt(machine_float_t x);
     #define USRSW_EXTI_IRQN     (EXTI15_10_IRQn)
     #define USRSW_EXTI_EDGE     (EXTI_Trigger_Rising)
 #elif defined (PYBOARD4)
-    #define HAVE_SWITCH       (1)
-    #define HAVE_SDCARD       (1)
-    #define HAVE_MMA7660      (1)
-    #define HAVE_LIS3DSH      (0)
-    #define ENABLE_RNG        (1)
-    #define ENABLE_RTC        (1)
-    #define ENABLE_TIMER      (1)
-    #define ENABLE_SERVO      (1)
-    #define ENABLE_AUDIO      (0)
+    #define MICROPY_HW_HAS_SWITCH       (1)
+    #define MICROPY_HW_HAS_SDCARD       (1)
+    #define MICROPY_HW_HAS_MMA7660      (1)
+    #define MICROPY_HW_HAS_LIS3DSH      (0)
+    #define MICROPY_HW_ENABLE_RNG       (1)
+    #define MICROPY_HW_ENABLE_RTC       (1)
+    #define MICROPY_HW_ENABLE_TIMER     (1)
+    #define MICROPY_HW_ENABLE_SERVO     (1)
+    #define MICROPY_HW_ENABLE_AUDIO     (0)
 
     #define USRSW_PORT          (GPIOB)
     #define USRSW_PIN           (GPIO_Pin_3)
@@ -66,15 +66,15 @@ machine_float_t machine_sqrt(machine_float_t x);
     #define USRSW_EXTI_IRQN     (EXTI15_10_IRQn)
     #define USRSW_EXTI_EDGE     (EXTI_Trigger_Rising)
 #elif defined (STM32F4DISC)
-    #define HAVE_SWITCH       (1)
-    #define HAVE_SDCARD       (0)
-    #define HAVE_MMA7660      (0)
-    #define HAVE_LIS3DSH      (1)
-    #define ENABLE_RNG        (1)
-    #define ENABLE_RTC        (1)
-    #define ENABLE_TIMER      (1)
-    #define ENABLE_SERVO      (0)
-    #define ENABLE_AUDIO      (0)
+    #define MICROPY_HW_HAS_SWITCH       (1)
+    #define MICROPY_HW_HAS_SDCARD       (0)
+    #define MICROPY_HW_HAS_MMA7660      (0)
+    #define MICROPY_HW_HAS_LIS3DSH      (1)
+    #define MICROPY_HW_ENABLE_RNG       (1)
+    #define MICROPY_HW_ENABLE_RTC       (1)
+    #define MICROPY_HW_ENABLE_TIMER     (1)
+    #define MICROPY_HW_ENABLE_SERVO     (0)
+    #define MICROPY_HW_ENABLE_AUDIO     (0)
 
     #define USRSW_PORT          (GPIOA)
     #define USRSW_PIN           (GPIO_Pin_0)