Commit 1f433c71 authored by Dave Hylands's avatar Dave Hylands Committed by Damien George
Browse files

stmhal: Fix linker map for STM32L476 chips.

In particular, this makes the L4 .isr_vector section 16K in size so it's
the same as the F4/F7 MCUs.  The patch also moves the L4 filesystem to
the end of flash, which allows for 512K filesystem on the 1Mb devices
like the STM32L476DISC.
parent bd925b59
......@@ -313,11 +313,13 @@ else
$(Q)$(DFU_UTIL) -a 0 -d $(DEVICE) -D $<
endif
TEXT_ADDR ?= 0x08020000
deploy-stlink: $(BUILD)/firmware.dfu
$(ECHO) "Writing $(BUILD)/firmware0.bin to the board via ST-LINK"
$(Q)$(STFLASH) write $(BUILD)/firmware0.bin 0x08000000
$(ECHO) "Writing $(BUILD)/firmware1.bin to the board via ST-LINK"
$(Q)$(STFLASH) --reset write $(BUILD)/firmware1.bin 0x08020000
$(Q)$(STFLASH) --reset write $(BUILD)/firmware1.bin $(TEXT_ADDR)
deploy-openocd: $(BUILD)/firmware.dfu
$(ECHO) "Writing $(BUILD)/firmware{0,1}.bin to the board via ST-LINK using OpenOCD"
......@@ -327,7 +329,7 @@ $(BUILD)/firmware.dfu: $(BUILD)/firmware.elf
$(ECHO) "Create $@"
$(Q)$(OBJCOPY) -O binary -j .isr_vector $^ $(BUILD)/firmware0.bin
$(Q)$(OBJCOPY) -O binary -j .text -j .data $^ $(BUILD)/firmware1.bin
$(Q)$(PYTHON) $(DFU) -b 0x08000000:$(BUILD)/firmware0.bin -b 0x08020000:$(BUILD)/firmware1.bin $@
$(Q)$(PYTHON) $(DFU) -b 0x08000000:$(BUILD)/firmware0.bin -b $(TEXT_ADDR):$(BUILD)/firmware1.bin $@
$(BUILD)/firmware.hex: $(BUILD)/firmware.elf
$(ECHO) "Create $@"
......
......@@ -2,3 +2,4 @@ MCU_SERIES = l4
CMSIS_MCU = STM32L476xx
AF_FILE = boards/stm32l476_af.csv
LD_FILE = boards/stm32l476xe.ld
TEXT_ADDR = 0x08004000
......@@ -2,3 +2,4 @@ MCU_SERIES = l4
CMSIS_MCU = STM32L476xx
AF_FILE = boards/stm32l476_af.csv
LD_FILE = boards/stm32l476xg.ld
TEXT_ADDR = 0x08004000
......@@ -6,9 +6,9 @@
MEMORY
{
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K
FLASH_ISR (rx) : ORIGIN = 0x08000000, LENGTH = 0x0000800 /* sector 0, 2 KiB */
FLASH_FS (r) : ORIGIN = 0x08000800, LENGTH = 0x001F800 /* sectors 1-63 (2K each = 126 KiB) */
FLASH_TEXT (rx) : ORIGIN = 0x08020000, LENGTH = 0x0060000 /* Sector starting @ 64 */
FLASH_ISR (rx) : ORIGIN = 0x08000000, LENGTH = 0x0004000 /* sectors 0-7, 16 KiB */
FLASH_TEXT (rx) : ORIGIN = 0x08004000, LENGTH = 0x005C000 /* sectors 8-191, 368 KiB */
FLASH_FS (r) : ORIGIN = 0x08060000, LENGTH = 0x0020000 /* sectors 192-255, 128 KiB */
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 96K
SRAM2 (xrw) : ORIGIN = 0x10000000, LENGTH = 32K
}
......@@ -30,3 +30,6 @@ _ram_start = ORIGIN(RAM);
_ram_end = ORIGIN(RAM) + LENGTH(RAM);
_heap_start = _ebss; /* heap starts just after statically allocated memory */
_heap_end = 0x20014000; /* tunable */
_flash_fs_start = ORIGIN(FLASH_FS);
_flash_fs_end = ORIGIN(FLASH_FS) + LENGTH(FLASH_FS);
......@@ -6,9 +6,9 @@
MEMORY
{
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
FLASH_ISR (rx) : ORIGIN = 0x08000000, LENGTH = 0x0000800 /* sector 0, 2 KiB */
FLASH_FS (r) : ORIGIN = 0x08000800, LENGTH = 0x001F800 /* sectors 1-63 (2K each = 126 KiB) */
FLASH_TEXT (rx) : ORIGIN = 0x08020000, LENGTH = 0x0080000 /* Sector starting @ 64 */
FLASH_ISR (rx) : ORIGIN = 0x08000000, LENGTH = 0x0004000 /* sectors 0-7, 16 KiB */
FLASH_TEXT (rx) : ORIGIN = 0x08004000, LENGTH = 0x007C000 /* sectors 8-255, 496 KiB */
FLASH_FS (r) : ORIGIN = 0x08080000, LENGTH = 0x0080000 /* sectors 256-511 512 KiB */
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 96K
SRAM2 (xrw) : ORIGIN = 0x10000000, LENGTH = 32K
}
......@@ -32,3 +32,6 @@ _ram_start = ORIGIN(RAM);
_ram_end = ORIGIN(RAM) + LENGTH(RAM);
_heap_start = _ebss; /* heap starts just after statically allocated memory */
_heap_end = 0x20014000; /* tunable */
_flash_fs_start = ORIGIN(FLASH_FS);
_flash_fs_end = ORIGIN(FLASH_FS) + LENGTH(FLASH_FS);
......@@ -86,11 +86,14 @@ STATIC byte flash_cache_mem[0x4000] __attribute__((aligned(4))); // 16k
#elif defined(STM32L476xx)
extern uint8_t _flash_fs_start;
extern uint8_t _flash_fs_end;
// The STM32L476 doesn't have CCRAM, so we use the 32K SRAM2 for this.
#define CACHE_MEM_START_ADDR (0x10000000) // SRAM2 data RAM, 32k
#define FLASH_SECTOR_SIZE_MAX (0x00800) // 2k max
#define FLASH_MEM_SEG1_START_ADDR (0x08000800) // sector 1
#define FLASH_MEM_SEG1_NUM_BLOCKS (252) // 1 Block=512 Bytes Reserve 126 kBytes
#define FLASH_MEM_SEG1_START_ADDR ((long)&_flash_fs_start)
#define FLASH_MEM_SEG1_NUM_BLOCKS ((&_flash_fs_end - &_flash_fs_start) / 512)
#else
#error "no storage support for this MCU"
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment