Commit 18605b36 authored by danicampora's avatar danicampora
Browse files

cc3200: Rename SD.config() to SD.config_pins().

parent 7102e515
......@@ -49,10 +49,7 @@
#define PYBSD_FREQUENCY_HZ 15000000 // 15MHz
static byte pybsd_pin_d0, pybsd_pin_clk, pybsd_pin_cmd;
static byte pybsd_af_d0, pybsd_af_clk, pybsd_af_cmd;
static const pin_obj_t *pybsd_pin_sd_detect;
static bool pybsd_pin_config_set;
static bool pybsd_is_enabled;
static bool pybsd_in_path;
static FATFS *sd_fatfs;
......@@ -63,20 +60,16 @@ void pybsd_init0 (void) {
ASSERT ((sd_fatfs = mem_Malloc(sizeof(FATFS))) != NULL);
}
bool pybsd_is_present(void) {
if (pybsd_pin_sd_detect) {
return pybsd_is_enabled && MAP_GPIOPinRead(pybsd_pin_sd_detect->port, pybsd_pin_sd_detect->bit);
}
return true;
return pybsd_is_enabled;
}
/******************************************************************************/
// Micro Python bindings
//
// Note: these function are a bit ad-hoc at the moment and are mainly intended
// for testing purposes. In the future SD should be a proper class with a
// consistent interface and methods to mount/unmount it.
/// \method sd_config([value])
/// Configure the pins used for the sd card.
......@@ -91,9 +84,12 @@ bool pybsd_is_present(void) {
///
/// pyb.SDcard.sd_config_pins (d0_pin, d0_af, clk_pin, clk_af, cmd_pin, cmd_af, card_detect_pin)
///
STATIC mp_obj_t pybsd_config (mp_uint_t n_args, const mp_obj_t *args) {
const pin_obj_t *pin = NULL;
STATIC mp_obj_t pybsd_config_pins (mp_uint_t n_args, const mp_obj_t *args) {
byte pybsd_pin_d0, pybsd_pin_clk, pybsd_pin_cmd;
byte pybsd_af_d0, pybsd_af_clk, pybsd_af_cmd;
const pin_obj_t *pin;
// get all the arguments
pin = pin_find(args[1]);
pybsd_pin_d0 = pin->pin_num;
pybsd_af_d0 = mp_obj_get_int(args[2]);
......@@ -106,25 +102,23 @@ STATIC mp_obj_t pybsd_config (mp_uint_t n_args, const mp_obj_t *args) {
pybsd_pin_cmd = pin->pin_num;
pybsd_af_cmd = mp_obj_get_int(args[6]);
pin_verify_af (pybsd_af_cmd);
// configure the sdhost pins
MAP_PinTypeSDHost(pybsd_pin_d0, pybsd_af_d0);
MAP_PinTypeSDHost(pybsd_pin_clk, pybsd_af_clk);
MAP_PinTypeSDHost(pybsd_pin_cmd, pybsd_af_cmd);
MAP_PinDirModeSet(pybsd_pin_clk, PIN_DIR_MODE_OUT);
// configure the card detect pin if provided
if (n_args == 8) {
pybsd_pin_sd_detect = pin_find(args[7]);
pin_config(pybsd_pin_sd_detect, PIN_MODE_0, GPIO_DIR_MODE_IN, PIN_TYPE_STD_PU, PIN_STRENGTH_4MA);
}
pybsd_pin_config_set = true;
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(pybsd_config_obj, 7, 8, pybsd_config);
STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(pybsd_config_pins_obj, 7, 8, pybsd_config_pins);
STATIC mp_obj_t pybsd_enable(mp_obj_t self) {
if (pybsd_pin_config_set) {
// Configure the D0 pin
MAP_PinTypeSDHost(pybsd_pin_d0, pybsd_af_d0);
// Configure the CLK pin
MAP_PinTypeSDHost(pybsd_pin_clk, pybsd_af_clk);
// Configure the CMD pin
MAP_PinTypeSDHost(pybsd_pin_cmd, pybsd_af_cmd);
// Set the SD card clock as an output pin
MAP_PinDirModeSet(pybsd_pin_clk, PIN_DIR_MODE_OUT);
// Enable SD peripheral clock
MAP_PRCMPeripheralClkEnable(PRCM_SDHOST, PRCM_RUN_MODE_CLK | PRCM_SLP_MODE_CLK);
// Reset MMCHS
......@@ -134,14 +128,6 @@ STATIC mp_obj_t pybsd_enable(mp_obj_t self) {
// Configure the card clock
MAP_SDHostSetExpClk(SDHOST_BASE, MAP_PRCMPeripheralClockGet(PRCM_SDHOST), PYBSD_FREQUENCY_HZ);
// Configure the card detect pin (if available)
if (pybsd_pin_sd_detect) {
pin_config(pybsd_pin_sd_detect, PIN_MODE_0, GPIO_DIR_MODE_IN, PIN_TYPE_STD_PU, PIN_STRENGTH_4MA);
}
}
else {
nlr_raise(mp_obj_new_exception_msg(&mp_type_OSError, mpexception_os_resource_not_avaliable));
}
pybsd_is_enabled = true;
// try to mount the sd card on /SD
......@@ -176,7 +162,7 @@ STATIC mp_obj_t pybsd_disable(mp_obj_t self) {
STATIC MP_DEFINE_CONST_FUN_OBJ_1(pybsd_disable_obj, pybsd_disable);
STATIC const mp_map_elem_t pybsd_locals_dict_table[] = {
{ MP_OBJ_NEW_QSTR(MP_QSTR_config), (mp_obj_t)&pybsd_config_obj },
{ MP_OBJ_NEW_QSTR(MP_QSTR_config_pins), (mp_obj_t)&pybsd_config_pins_obj },
{ MP_OBJ_NEW_QSTR(MP_QSTR_enable), (mp_obj_t)&pybsd_enable_obj },
{ MP_OBJ_NEW_QSTR(MP_QSTR_disable), (mp_obj_t)&pybsd_disable_obj },
};
......
......@@ -162,7 +162,7 @@ Q(disable)
// for SD class
Q(SD)
Q(config)
Q(config_pins)
Q(enable)
Q(disable)
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment