Commit 13c5a228 authored by Damien George's avatar Damien George
Browse files

docs/esp8266: Update quickref and tutorial for OneWire/DS18X20 driver.

parent 59a95097
......@@ -253,15 +253,14 @@ The OneWire driver is implemented in software and works on all pins::
ow.scan() # return a list of devices on the bus
ow.reset() # reset the bus
ow.readbyte() # read a byte # read 5 bytes
ow.writebyte(0x12) # write a byte on the bus
ow.write('123') # write bytes on the bus
ow.select_rom(b'12345678') # select a specific device by its ROM code
There is a specific driver for DS18B20 devices::
There is a specific driver for DS18S20 and DS18B20 devices::
import time
ds = onewire.DS18B20(ow)
import time, ds18x20
ds = ds18x20.DS18X20(ow)
roms = ds.scan()
......@@ -6,19 +6,19 @@ The 1-wire bus is a serial bus that uses just a single wire for communication
is a very popular 1-wire device, and here we show how to use the onewire module
to read from such a device.
For the following code to work you need to have at least one DS18B20 temperature
For the following code to work you need to have at least one DS18S20 or DS18B20 temperature
sensor with its data line connected to GPIO12. You must also power the sensors
and connect a 4.7k Ohm resistor between the data pin and the power pin. ::
import time
import machine
import onewire
import onewire, ds18x20
# the device is on GPIO12
dat = machine.Pin(12)
# create the onewire object
ds = onewire.DS18B20(onewire.OneWire(dat))
ds = ds18x20.DS18X20(onewire.OneWire(dat))
# scan for devices on the bus
roms = ds.scan()
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment