main.c 36.6 KB
Newer Older
1
#include <stdio.h>
Damien's avatar
Damien committed
2
3
#include <stm32f4xx.h>
#include <stm32f4xx_rcc.h>
4
#include <stm32f4xx_gpio.h>
5
#include <stm32f4xx_tim.h>
Damien's avatar
Damien committed
6
#include <stm32f4xx_pwr.h>
7
#include <stm32f4xx_rtc.h>
8
#include <stm32f4xx_usart.h>
9
#include <stm32f4xx_rng.h>
10
#include <stm_misc.h>
Damien's avatar
Damien committed
11
12
#include "std.h"

13
#include "misc.h"
Damien's avatar
Damien committed
14
15
#include "mpyconfig.h"
#include "gc.h"
16
#include "systick.h"
17
#include "led.h"
18
#include "lcd.h"
19
#include "storage.h"
20
#include "mma.h"
21
#include "usart.h"
Damien's avatar
Damien committed
22
#include "usb.h"
23
#include "ff.h"
24
#include "timer.h"
25
#include "audio.h"
26
27
28
#include "pybwlan.h"

int errno;
Damien's avatar
Damien committed
29

Damien's avatar
Damien committed
30
31
extern uint32_t _heap_start;

32
33
static FATFS fatfs0;

34
35
36
37
38
39
40
41
42
43
44
45
void flash_error(int n) {
    for (int i = 0; i < n; i++) {
        led_state(PYB_LED_R1, 1);
        led_state(PYB_LED_R2, 0);
        sys_tick_delay_ms(250);
        led_state(PYB_LED_R1, 0);
        led_state(PYB_LED_R2, 1);
        sys_tick_delay_ms(250);
    }
    led_state(PYB_LED_R2, 0);
}

46
static void impl02_c_version(void) {
Damien's avatar
Damien committed
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
    int x = 0;
    while (x < 400) {
        int y = 0;
        while (y < 400) {
            volatile int z = 0;
            while (z < 400) {
                z = z + 1;
            }
            y = y + 1;
        }
        x = x + 1;
    }
}

#define PYB_USRSW_PORT (GPIOA)
62
#define PYB_USRSW_PIN (GPIO_Pin_13)
Damien's avatar
Damien committed
63

64
void sw_init(void) {
Damien's avatar
Damien committed
65
    // make it an input with pull-up
66
67
68
69
70
    GPIO_InitTypeDef GPIO_InitStructure;
    GPIO_InitStructure.GPIO_Pin = PYB_USRSW_PIN;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
    GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
    GPIO_Init(PYB_USRSW_PORT, &GPIO_InitStructure);
Damien's avatar
Damien committed
71
72
}

73
int sw_get(void) {
74
    if (PYB_USRSW_PORT->IDR & PYB_USRSW_PIN) {
Damien's avatar
Damien committed
75
76
77
78
79
80
81
82
83
84
85
86
        // pulled high, so switch is not pressed
        return 0;
    } else {
        // pulled low, so switch is pressed
        return 1;
    }
}

void __fatal_error(const char *msg) {
    lcd_print_strn("\nFATAL ERROR:\n", 14);
    lcd_print_strn(msg, strlen(msg));
    for (;;) {
87
        flash_error(1);
Damien's avatar
Damien committed
88
89
90
    }
}

91
#include "nlr.h"
Damien's avatar
Damien committed
92
93
#include "misc.h"
#include "lexer.h"
94
#include "lexerstm.h"
Damien's avatar
Damien committed
95
96
97
98
#include "mpyconfig.h"
#include "parse.h"
#include "compile.h"
#include "runtime.h"
99
100
#include "repl.h"

101
102
103
static qstr pyb_config_source_dir = 0;
static qstr pyb_config_main = 0;

104
py_obj_t pyb_source_dir(py_obj_t source_dir) {
Damien's avatar
Damien committed
105
    pyb_config_source_dir = py_obj_get_qstr(source_dir);
106
107
108
109
    return py_const_none;
}

py_obj_t pyb_main(py_obj_t main) {
Damien's avatar
Damien committed
110
    pyb_config_main = py_obj_get_qstr(main);
111
112
113
114
    return py_const_none;
}

// sync all file systems
115
py_obj_t pyb_sync(void) {
116
    storage_flush();
117
118
    return py_const_none;
}
Damien's avatar
Damien committed
119
120

py_obj_t pyb_delay(py_obj_t count) {
Damien's avatar
Damien committed
121
    sys_tick_delay_ms(py_obj_get_int(count));
Damien's avatar
Damien committed
122
123
124
125
    return py_const_none;
}

py_obj_t pyb_led(py_obj_t state) {
126
    led_state(PYB_LED_G1, rt_is_true(state));
Damien's avatar
Damien committed
127
128
129
    return state;
}

130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
py_obj_t py_obj_new_user(const py_user_info_t *info, machine_uint_t data1, machine_uint_t data2);
void py_user_get_data(py_obj_t o, machine_uint_t *data1, machine_uint_t *data2);
void py_user_set_data(py_obj_t o, machine_uint_t data1, machine_uint_t data2);

py_obj_t led_obj_on(py_obj_t self) {
    machine_uint_t led_id;
    py_user_get_data(self, &led_id, NULL);
    switch (led_id) {
        case 1: led_state(PYB_LED_G1, 1); break;
        case 2: led_state(PYB_LED_G2, 1); break;
    }
    return py_const_none;
}

py_obj_t led_obj_off(py_obj_t self) {
    machine_uint_t led_id;
    py_user_get_data(self, &led_id, NULL);
    switch (led_id) {
        case 1: led_state(PYB_LED_G1, 0); break;
        case 2: led_state(PYB_LED_G2, 0); break;
    }
    return py_const_none;
}

const py_user_info_t led_obj_info = {
    "Led",
    NULL, // print
    {
        {"on", 0, led_obj_on},
        {"off", 0, led_obj_off},
        {NULL, 0, NULL},
    }
};

py_obj_t pyb_Led(py_obj_t led_id) {
    return py_obj_new_user(&led_obj_info, (machine_uint_t)py_obj_get_int(led_id), 0);
}

168
py_obj_t pyb_sw(void) {
Damien's avatar
Damien committed
169
170
171
172
173
174
175
    if (sw_get()) {
        return py_const_true;
    } else {
        return py_const_false;
    }
}

176
/*
177
178
179
180
181
182
void g(uint i) {
    printf("g:%d\n", i);
    if (i & 1) {
        nlr_jump((void*)(42 + i));
    }
}
183
void f(void) {
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
    nlr_buf_t nlr;
    int i;
    for (i = 0; i < 4; i++) {
        printf("f:loop:%d:%p\n", i, &nlr);
        if (nlr_push(&nlr) == 0) {
            // normal
            //printf("a:%p:%p %p %p %u\n", &nlr, nlr.ip, nlr.sp, nlr.prev, nlr.ret_val);
            g(i);
            printf("f:lp:%d:nrm\n", i);
            nlr_pop();
        } else {
            // nlr
            //printf("b:%p:%p %p %p %u\n", &nlr, nlr.ip, nlr.sp, nlr.prev, nlr.ret_val);
            printf("f:lp:%d:nlr:%d\n", i, (int)nlr.ret_val);
        }
    }
}
201
void nlr_test(void) {
202
203
    f(1);
}
204
205
*/

206
void fatality(void) {
207
208
209
210
211
212
    led_state(PYB_LED_R1, 1);
    led_state(PYB_LED_G1, 1);
    led_state(PYB_LED_R2, 1);
    led_state(PYB_LED_G2, 1);
}

213
static const char fresh_boot_py[] =
214
215
216
217
218
219
220
221
222
223
224
225
"# boot.py -- run on boot-up\n"
"# can run arbitrary Python, but best to keep it minimal\n"
"\n"
"pyb.source_dir('/src')\n"
"pyb.main('main.py')\n"
"#pyb.usb_usr('VCP')\n"
"#pyb.usb_msd(True, 'dual partition')\n"
"#pyb.flush_cache(False)\n"
"#pyb.error_log('error.txt')\n"
;

// get lots of info about the board
226
static py_obj_t pyb_info(void) {
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
    // get and print clock speeds
    // SYSCLK=168MHz, HCLK=168MHz, PCLK1=42MHz, PCLK2=84MHz
    {
        RCC_ClocksTypeDef rcc_clocks;
        RCC_GetClocksFreq(&rcc_clocks);
        printf("S=%lu\nH=%lu\nP1=%lu\nP2=%lu\n", rcc_clocks.SYSCLK_Frequency, rcc_clocks.HCLK_Frequency, rcc_clocks.PCLK1_Frequency, rcc_clocks.PCLK2_Frequency);
    }

    // to print info about memory
    {
        extern void *_sidata;
        extern void *_sdata;
        extern void *_edata;
        extern void *_sbss;
        extern void *_ebss;
        extern void *_estack;
        extern void *_etext;
        printf("_sidata=%p\n", &_sidata);
        printf("_sdata=%p\n", &_sdata);
        printf("_edata=%p\n", &_edata);
        printf("_sbss=%p\n", &_sbss);
        printf("_ebss=%p\n", &_ebss);
        printf("_estack=%p\n", &_estack);
        printf("_etext=%p\n", &_etext);
        printf("_heap_start=%p\n", &_heap_start);
    }

254
255
256
257
258
259
260
261
262
263
    // GC info
    {
        gc_info_t info;
        gc_info(&info);
        printf("GC:\n");
        printf("  %lu total\n", info.total);
        printf("  %lu : %lu\n", info.used, info.free);
        printf("  1=%lu 2=%lu m=%lu\n", info.num_1block, info.num_2block, info.max_block);
    }

264
265
266
267
268
    // free space on flash
    {
        DWORD nclst;
        FATFS *fatfs;
        f_getfree("0:", &nclst, &fatfs);
269
        printf("LFS free: %u bytes\n", (uint)(nclst * fatfs->csize * 512));
270
    }
271
272

    return py_const_none;
273
274
}

275
py_obj_t pyb_usart_send(py_obj_t data) {
Damien's avatar
Damien committed
276
    usart_tx_char(py_obj_get_int(data));
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
    return py_const_none;
}

py_obj_t pyb_usart_receive(void) {
    return py_obj_new_int(usart_rx_char());
}

py_obj_t pyb_usart_status(void) {
    if (usart_rx_any()) {
        return py_const_true;
    } else {
        return py_const_false;
    }
}

Damien's avatar
Damien committed
292
293
294
295
296
297
298
299
300
301
302
303
char *strdup(const char *str) {
    uint32_t len = strlen(str);
    char *s2 = m_new(char, len + 1);
    memcpy(s2, str, len);
    s2[len] = 0;
    return s2;
}

#define READLINE_HIST_SIZE (8)

static const char *readline_hist[READLINE_HIST_SIZE] = {NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL};

304
305
306
307
308
void stdout_tx_str(const char *str) {
    usart_tx_str(str);
    usb_vcp_send_str(str);
}

309
int readline(vstr_t *line, const char *prompt) {
310
    stdout_tx_str(prompt);
311
    int len = vstr_len(line);
Damien's avatar
Damien committed
312
313
    int escape = 0;
    int hist_num = 0;
314
    for (;;) {
315
316
317
318
319
320
321
322
323
        char c;
        for (;;) {
            if (usb_vcp_rx_any() != 0) {
                c = usb_vcp_rx_get();
                break;
            } else if (usart_rx_any()) {
                c = usart_rx_char();
                break;
            }
Damien's avatar
Damien committed
324
            sys_tick_delay_ms(1);
325
        }
Damien's avatar
Damien committed
326
327
328
329
        if (escape == 0) {
            if (c == 4 && vstr_len(line) == len) {
                return 0;
            } else if (c == '\r') {
330
                stdout_tx_str("\r\n");
Damien's avatar
Damien committed
331
332
333
334
335
336
337
338
339
340
                for (int i = READLINE_HIST_SIZE - 1; i > 0; i--) {
                    readline_hist[i] = readline_hist[i - 1];
                }
                readline_hist[0] = strdup(vstr_str(line));
                return 1;
            } else if (c == 27) {
                escape = true;
            } else if (c == 127) {
                if (vstr_len(line) > len) {
                    vstr_cut_tail(line, 1);
341
                    stdout_tx_str("\b \b");
Damien's avatar
Damien committed
342
343
344
                }
            } else if (32 <= c && c <= 126) {
                vstr_add_char(line, c);
345
                stdout_tx_str(line->buf + line->len - 1);
346
            }
Damien's avatar
Damien committed
347
348
349
350
351
352
353
354
355
356
357
358
359
        } else if (escape == 1) {
            if (c == '[') {
                escape = 2;
            } else {
                escape = 0;
            }
        } else if (escape == 2) {
            escape = 0;
            if (c == 'A') {
                // up arrow
                if (hist_num < READLINE_HIST_SIZE && readline_hist[hist_num] != NULL) {
                    // erase line
                    for (int i = line->len - len; i > 0; i--) {
360
                        stdout_tx_str("\b \b");
Damien's avatar
Damien committed
361
362
363
364
365
                    }
                    // set line to history
                    line->len = len;
                    vstr_add_str(line, readline_hist[hist_num]);
                    // draw line
366
                    stdout_tx_str(readline_hist[hist_num]);
Damien's avatar
Damien committed
367
368
369
370
371
372
                    // increase hist num
                    hist_num += 1;
                }
            }
        } else {
            escape = 0;
373
        }
Damien's avatar
Damien committed
374
        sys_tick_delay_ms(10);
375
    }
376
377
}

378
void do_repl(void) {
379
380
    stdout_tx_str("Micro Python 0.5; STM32F405RG; PYBv2\r\n");
    stdout_tx_str("Type \"help\" for more information.\r\n");
381
382
383

    vstr_t line;
    vstr_init(&line);
384
385

    for (;;) {
386
387
388
        vstr_reset(&line);
        int ret = readline(&line, ">>> ");
        if (ret == 0) {
389
            // EOF
390
391
392
393
394
            break;
        }

        if (vstr_len(&line) == 0) {
            continue;
395
        }
396
397

        if (py_repl_is_compound_stmt(vstr_str(&line))) {
398
            for (;;) {
399
400
401
402
403
                vstr_add_char(&line, '\n');
                int len = vstr_len(&line);
                int ret = readline(&line, "... ");
                if (ret == 0 || vstr_len(&line) == len) {
                    // done entering compound statement
404
405
406
407
408
409
                    break;
                }
            }
        }

        py_lexer_str_buf_t sb;
410
        py_lexer_t *lex = py_lexer_new_from_str_len("<stdin>", vstr_str(&line), vstr_len(&line), false, &sb);
411
412
413
414
415
416
417
418
419
        py_parse_node_t pn = py_parse(lex, PY_PARSE_SINGLE_INPUT);
        py_lexer_free(lex);

        if (pn != PY_PARSE_NODE_NULL) {
            bool comp_ok = py_compile(pn, true);
            if (comp_ok) {
                py_obj_t module_fun = rt_make_function_from_id(1);
                if (module_fun != py_const_none) {
                    nlr_buf_t nlr;
420
                    uint32_t start = sys_tick_counter;
421
422
423
                    if (nlr_push(&nlr) == 0) {
                        rt_call_function_0(module_fun);
                        nlr_pop();
424
425
                        uint32_t ticks = sys_tick_counter - start; // TODO implement a function that does this properly
                        printf("(took %lu ms)\n", ticks);
426
427
428
429
430
431
432
433
434
                    } else {
                        // uncaught exception
                        py_obj_print((py_obj_t)nlr.ret_val);
                        printf("\n");
                    }
                }
            }
        }
    }
435

436
    stdout_tx_str("\r\n");
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
}

bool do_file(const char *filename) {
    py_lexer_file_buf_t fb;
    py_lexer_t *lex = py_lexer_new_from_file(filename, &fb);

    if (lex == NULL) {
        printf("could not open file '%s' for reading\n", filename);
        return false;
    }

    py_parse_node_t pn = py_parse(lex, PY_PARSE_FILE_INPUT);
    py_lexer_free(lex);

    if (pn == PY_PARSE_NODE_NULL) {
        return false;
    }

    bool comp_ok = py_compile(pn, false);
    if (!comp_ok) {
        return false;
    }

    py_obj_t module_fun = rt_make_function_from_id(1);
    if (module_fun == py_const_none) {
        return false;
    }

    nlr_buf_t nlr;
    if (nlr_push(&nlr) == 0) {
        rt_call_function_0(module_fun);
        nlr_pop();
        return true;
    } else {
        // uncaught exception
        py_obj_print((py_obj_t)nlr.ret_val);
        printf("\n");
        return false;
    }
476
477
}

478
479
480
481
482
483
#define RAM_START (0x20000000) // fixed for chip
#define HEAP_END  (0x2001c000) // tunable
#define RAM_END   (0x20020000) // fixed for chip

void gc_helper_get_regs_and_clean_stack(machine_uint_t *regs, machine_uint_t heap_end);

484
void gc_collect(void) {
485
    uint32_t start = sys_tick_counter;
Damien's avatar
Damien committed
486
    gc_collect_start();
487
488
489
490
    gc_collect_root((void**)RAM_START, (((uint32_t)&_heap_start) - RAM_START) / 4);
    machine_uint_t regs[10];
    gc_helper_get_regs_and_clean_stack(regs, HEAP_END);
    gc_collect_root((void**)HEAP_END, (RAM_END - HEAP_END) / 4); // will trace regs since they now live in this function on the stack
Damien's avatar
Damien committed
491
    gc_collect_end();
492
493
494
495
496
497
498
499
500
    uint32_t ticks = sys_tick_counter - start; // TODO implement a function that does this properly
    gc_info_t info;
    gc_info(&info);
    printf("GC@%lu %lums\n", start, ticks);
    printf(" %lu total\n", info.total);
    printf(" %lu : %lu\n", info.used, info.free);
    printf(" 1=%lu 2=%lu m=%lu\n", info.num_1block, info.num_2block, info.max_block);
}

501
py_obj_t pyb_gc(void) {
502
503
    gc_collect();
    return py_const_none;
Damien's avatar
Damien committed
504
505
}

506
507
508
509
510
511
512
513
514
// PWM
// TIM2 and TIM5 have CH1, CH2, CH3, CH4 on PA0-PA3 respectively
// they are both 32-bit counters
// 16-bit prescaler
// TIM2_CH3 also on PB10 (used below)
void servo_init(void) {
    // TIM2 clock enable
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);

515
516
517
    // for PB10
    /*
    // GPIOB Configuration: TIM2_CH3 (PB10)
518
519
520
521
522
523
524
525
526
527
    GPIO_InitTypeDef GPIO_InitStructure;
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
    GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
    GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
    GPIO_Init(GPIOB, &GPIO_InitStructure);

    // Connect TIM2 pins to AF1
    GPIO_PinAFConfig(GPIOB, GPIO_PinSource10, GPIO_AF_TIM2);
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
    */

    // for PA0, PA1, PA2, PA3
    {
        // GPIOA Configuration: TIM2_CH0, TIM2_CH1 (PA0, PA1)
        GPIO_InitTypeDef GPIO_InitStructure;
        GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_3;
        GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
        GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
        GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
        GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
        GPIO_Init(GPIOA, &GPIO_InitStructure);

        // Connect TIM2 pins to AF1
        GPIO_PinAFConfig(GPIOA, GPIO_PinSource0, GPIO_AF_TIM2);
        GPIO_PinAFConfig(GPIOA, GPIO_PinSource1, GPIO_AF_TIM2);
        GPIO_PinAFConfig(GPIOA, GPIO_PinSource2, GPIO_AF_TIM2);
        GPIO_PinAFConfig(GPIOA, GPIO_PinSource3, GPIO_AF_TIM2);
    }
547
548
549
550
551
552
553
554
555
556
557
558

    // Compute the prescaler value so TIM2 runs at 100kHz
    uint16_t PrescalerValue = (uint16_t) ((SystemCoreClock / 2) / 100000) - 1;

    // Time base configuration
    TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
    TIM_TimeBaseStructure.TIM_Period = 2000; // timer cycles at 50Hz
    TIM_TimeBaseStructure.TIM_Prescaler = PrescalerValue;
    TIM_TimeBaseStructure.TIM_ClockDivision = 0;
    TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
    TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);

559
    // PWM Mode configuration
560
561
562
563
564
    TIM_OCInitTypeDef TIM_OCInitStructure;
    TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;
    TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
    TIM_OCInitStructure.TIM_Pulse = 150; // units of 10us
    TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High;
565
566
567
568
    TIM_OC1Init(TIM2, &TIM_OCInitStructure); // channel 1
    TIM_OC2Init(TIM2, &TIM_OCInitStructure); // channel 2
    TIM_OC3Init(TIM2, &TIM_OCInitStructure); // channel 3
    TIM_OC4Init(TIM2, &TIM_OCInitStructure); // channel 4
569
570

    // ?
571
572
573
574
    TIM_OC1PreloadConfig(TIM2, TIM_OCPreload_Enable); // channel 1
    TIM_OC2PreloadConfig(TIM2, TIM_OCPreload_Enable); // channel 2
    TIM_OC3PreloadConfig(TIM2, TIM_OCPreload_Enable); // channel 3
    TIM_OC4PreloadConfig(TIM2, TIM_OCPreload_Enable); // channel 4
575
576
577
578
579
580
581
582

    // ?
    TIM_ARRPreloadConfig(TIM2, ENABLE);

    // TIM2 enable counter
    TIM_Cmd(TIM2, ENABLE);
}

583
584
py_obj_t pyb_servo_set(py_obj_t port, py_obj_t value) {
    int p = py_obj_get_int(port);
Damien's avatar
Damien committed
585
    int v = py_obj_get_int(value);
586
587
    if (v < 100) { v = 100; }
    if (v > 200) { v = 200; }
588
589
590
591
592
593
    switch (p) {
        case 1: TIM2->CCR1 = v; break;
        case 2: TIM2->CCR2 = v; break;
        case 3: TIM2->CCR3 = v; break;
        case 4: TIM2->CCR4 = v; break;
    }
594
595
596
    return py_const_none;
}

597
598
599
600
601
602
603
604
py_obj_t pyb_pwm_set(py_obj_t period, py_obj_t pulse) {
    int pe = py_obj_get_int(period);
    int pu = py_obj_get_int(pulse);
    TIM2->ARR = pe;
    TIM2->CCR3 = pu;
    return py_const_none;
}

Damien's avatar
Damien committed
605
606
#define MMA_ADDR (0x4c)

607
608
int mma_buf[12];

609
py_obj_t pyb_mma_read(void) {
610
611
612
613
614
615
    for (int i = 0; i <= 6; i += 3) {
        mma_buf[0 + i] = mma_buf[0 + i + 3];
        mma_buf[1 + i] = mma_buf[1 + i + 3];
        mma_buf[2 + i] = mma_buf[2 + i + 3];
    }

Damien's avatar
Damien committed
616
617
618
    mma_start(MMA_ADDR, 1);
    mma_send_byte(0);
    mma_restart(MMA_ADDR, 0);
619
    for (int i = 0; i <= 2; i++) {
Damien's avatar
Damien committed
620
621
622
623
        int v = mma_read_ack() & 0x3f;
        if (v & 0x20) {
            v |= ~0x1f;
        }
624
        mma_buf[9 + i] = v;
Damien's avatar
Damien committed
625
    }
626
627
628
629
630
631
632
633
    int jolt_info = mma_read_nack();

    py_obj_t data[4];
    data[0] = py_obj_new_int(jolt_info);
    data[1] = py_obj_new_int(mma_buf[2] + mma_buf[5] + mma_buf[8] + mma_buf[11]);
    data[2] = py_obj_new_int(mma_buf[1] + mma_buf[4] + mma_buf[7] + mma_buf[10]);
    data[3] = py_obj_new_int(mma_buf[0] + mma_buf[3] + mma_buf[6] + mma_buf[9]);

Damien's avatar
Damien committed
634
635
636
    return rt_build_tuple(4, data); // items in reverse order in data
}

637
py_obj_t pyb_hid_send_report(py_obj_t arg) {
Damien's avatar
Damien committed
638
    py_obj_t *items = py_obj_get_array_fixed_n(arg, 4);
639
    uint8_t data[4];
Damien's avatar
Damien committed
640
641
642
643
    data[0] = py_obj_get_int(items[0]);
    data[1] = py_obj_get_int(items[1]);
    data[2] = py_obj_get_int(items[2]);
    data[3] = py_obj_get_int(items[3]);
644
645
646
647
    usb_hid_send_report(data);
    return py_const_none;
}

648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
static void rtc_init(void) {
    /* Enable the PWR clock */
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);

    /* Allow access to RTC */
    PWR_BackupAccessCmd(ENABLE);

    /* Enable the LSE OSC */
    RCC_LSEConfig(RCC_LSE_ON);

    /* Wait till LSE is ready */
    while(RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET) {
    }

    /* Select the RTC Clock Source */
    RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);
    /* ck_spre(1Hz) = RTCCLK(LSE) /(uwAsynchPrediv + 1)*(uwSynchPrediv + 1)*/
    uint32_t uwSynchPrediv = 0xFF;
    uint32_t uwAsynchPrediv = 0x7F;

    /* Enable the RTC Clock */
    RCC_RTCCLKCmd(ENABLE);

    /* Wait for RTC APB registers synchronisation */
    RTC_WaitForSynchro();

    /* Configure the RTC data register and RTC prescaler */
    RTC_InitTypeDef RTC_InitStructure;
    RTC_InitStructure.RTC_AsynchPrediv = uwAsynchPrediv;
    RTC_InitStructure.RTC_SynchPrediv = uwSynchPrediv;
    RTC_InitStructure.RTC_HourFormat = RTC_HourFormat_24;
    RTC_Init(&RTC_InitStructure);

    // Set the date (BCD)
    RTC_DateTypeDef RTC_DateStructure;
    RTC_DateStructure.RTC_Year = 0x13;
    RTC_DateStructure.RTC_Month = RTC_Month_October;
    RTC_DateStructure.RTC_Date = 0x26;
    RTC_DateStructure.RTC_WeekDay = RTC_Weekday_Saturday;
    RTC_SetDate(RTC_Format_BCD, &RTC_DateStructure);

    // Set the time (BCD)
    RTC_TimeTypeDef RTC_TimeStructure;
    RTC_TimeStructure.RTC_H12     = RTC_H12_AM;
    RTC_TimeStructure.RTC_Hours   = 0x01;
    RTC_TimeStructure.RTC_Minutes = 0x53;
    RTC_TimeStructure.RTC_Seconds = 0x00;
    RTC_SetTime(RTC_Format_BCD, &RTC_TimeStructure);

    // Indicator for the RTC configuration
    //RTC_WriteBackupRegister(RTC_BKP_DR0, 0x32F2);
}

py_obj_t pyb_rtc_read(void) {
    RTC_TimeTypeDef RTC_TimeStructure;
    RTC_GetTime(RTC_Format_BIN, &RTC_TimeStructure);
    printf("%02d:%02d:%02d\n", RTC_TimeStructure.RTC_Hours, RTC_TimeStructure.RTC_Minutes, RTC_TimeStructure.RTC_Seconds);
    return py_const_none;
}

Damien's avatar
Damien committed
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
void file_obj_print(py_obj_t o) {
    FIL *fp;
    py_user_get_data(o, (machine_uint_t*)&fp, NULL);
    printf("<file %p>", fp);
}

py_obj_t file_obj_read(py_obj_t self, py_obj_t arg) {
    FIL *fp;
    py_user_get_data(self, (machine_uint_t*)&fp, NULL);
    int n = py_obj_get_int(arg);
    char *buf = m_new(char, n + 1);
    UINT n_out;
    f_read(fp, buf, n, &n_out);
    buf[n_out] = 0;
    return py_obj_new_str(qstr_from_str_take(buf));
}

py_obj_t file_obj_write(py_obj_t self, py_obj_t arg) {
    FIL *fp;
    py_user_get_data(self, (machine_uint_t*)&fp, NULL);
    const char *s = qstr_str(py_obj_get_qstr(arg));
    UINT n_out;
    FRESULT res = f_write(fp, s, strlen(s), &n_out);
    if (res != FR_OK) {
        printf("File error: could not write to file; error code %d\n", res);
    } else if (n_out != strlen(s)) {
        printf("File error: could not write all data to file; wrote %d / %d bytes\n", n_out, strlen(s));
    }
    return py_const_none;
}

py_obj_t file_obj_close(py_obj_t self) {
    FIL *fp;
    py_user_get_data(self, (machine_uint_t*)&fp, NULL);
    f_close(fp);
    return py_const_none;
}

// TODO gc hook to close the file if not already closed
const py_user_info_t file_obj_info = {
    "File",
    file_obj_print,
    {
        {"read", 1, file_obj_read},
        {"write", 1, file_obj_write},
        {"close", 0, file_obj_close},
        {NULL, 0, NULL},
    }
};

py_obj_t pyb_io_open(py_obj_t o_filename, py_obj_t o_mode) {
    const char *filename = qstr_str(py_obj_get_qstr(o_filename));
    const char *mode = qstr_str(py_obj_get_qstr(o_mode));
    FIL *fp = m_new(FIL, 1);
    if (mode[0] == 'r') {
        // open for reading
        FRESULT res = f_open(fp, filename, FA_READ);
        if (res != FR_OK) {
            printf("FileNotFoundError: [Errno 2] No such file or directory: '%s'\n", filename);
            return py_const_none;
        }
    } else if (mode[0] == 'w') {
        // open for writing, truncate the file first
        FRESULT res = f_open(fp, filename, FA_WRITE | FA_CREATE_ALWAYS);
        if (res != FR_OK) {
            printf("?FileError: could not create file: '%s'\n", filename);
            return py_const_none;
        }
    } else {
        printf("ValueError: invalid mode: '%s'\n", mode);
        return py_const_none;
    }
    return py_obj_new_user(&file_obj_info, (machine_uint_t)fp, 0);
}

783
784
785
786
py_obj_t pyb_rng_get(void) {
    return py_obj_new_int(RNG_GetRandomNumber() >> 16);
}

787
int main(void) {
788
    // TODO disable JTAG
Damien's avatar
Damien committed
789

790
791
792
    // update the SystemCoreClock variable
    SystemCoreClockUpdate();

793
794
795
796
797
798
    // set interrupt priority config to use all 4 bits for pre-empting
    NVIC_PriorityGroupConfig(NVIC_PriorityGroup_4);

    // enable the CCM RAM and the GPIO's
    RCC->AHB1ENR |= RCC_AHB1ENR_CCMDATARAMEN | RCC_AHB1ENR_GPIOAEN | RCC_AHB1ENR_GPIOBEN | RCC_AHB1ENR_GPIOCEN;

799
    // configure SDIO pins to be high to start with (apparently makes it more robust)
800
801
802
803
804
805
806
807
808
809
810
811
812
813
    {
      GPIO_InitTypeDef GPIO_InitStructure;
      GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | GPIO_Pin_11 | GPIO_Pin_12;
      GPIO_InitStructure.GPIO_Speed = GPIO_Speed_25MHz;
      GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
      GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
      GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
      GPIO_Init(GPIOC, &GPIO_InitStructure);

      // Configure PD.02 CMD line
      GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
      GPIO_Init(GPIOD, &GPIO_InitStructure);
    }

814
815
    // basic sub-system init
    sys_tick_init();
Damien's avatar
Damien committed
816
    led_init();
817
    rtc_init();
818
819
820
821
822

    // turn on LED to indicate bootup
    led_state(PYB_LED_G1, 1);

    // more sub-system init
Damien's avatar
Damien committed
823
    sw_init();
824
    storage_init();
825
826

    //usart_init(); disabled while wi-fi is enabled
Damien's avatar
Damien committed
827

828
829
    int first_soft_reset = true;

830
831
soft_reset:

Damien's avatar
Damien committed
832
    // GC init
833
    gc_init(&_heap_start, (void*)HEAP_END);
Damien's avatar
Damien committed
834

835
    // Micro Python init
836
837
    qstr_init();
    rt_init();
838

839
    // LCD init
840
    //lcd_init(); disabled while servos on PA0 PA1
841

842
843
844
    // servo
    servo_init();

845
846
847
    // audio
    audio_init();

848
849
850
    // timer
    timer_init();

851
852
853
854
855
856
    // RNG
    {
        RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_RNG, ENABLE);
        RNG_Cmd(ENABLE);
    }

857
    // add some functions to the python namespace
858
859
860
861
862
    {
        py_obj_t m = py_module_new();
        rt_store_attr(m, qstr_from_str_static("info"), rt_make_function_0(pyb_info));
        rt_store_attr(m, qstr_from_str_static("source_dir"), rt_make_function_1(pyb_source_dir));
        rt_store_attr(m, qstr_from_str_static("main"), rt_make_function_1(pyb_main));
863
        rt_store_attr(m, qstr_from_str_static("sync"), rt_make_function_0(pyb_sync));
864
865
866
867
        rt_store_attr(m, qstr_from_str_static("gc"), rt_make_function_0(pyb_gc));
        rt_store_attr(m, qstr_from_str_static("delay"), rt_make_function_1(pyb_delay));
        rt_store_attr(m, qstr_from_str_static("led"), rt_make_function_1(pyb_led));
        rt_store_attr(m, qstr_from_str_static("sw"), rt_make_function_0(pyb_sw));
868
        rt_store_attr(m, qstr_from_str_static("servo"), rt_make_function_2(pyb_servo_set));
869
        rt_store_attr(m, qstr_from_str_static("pwm"), rt_make_function_2(pyb_pwm_set));
Damien's avatar
Damien committed
870
        rt_store_attr(m, qstr_from_str_static("mma"), rt_make_function_0(pyb_mma_read));
871
        rt_store_attr(m, qstr_from_str_static("hid"), rt_make_function_1(pyb_hid_send_report));
872
        rt_store_attr(m, qstr_from_str_static("time"), rt_make_function_0(pyb_rtc_read));
873
874
875
        rt_store_attr(m, qstr_from_str_static("uout"), rt_make_function_1(pyb_usart_send));
        rt_store_attr(m, qstr_from_str_static("uin"), rt_make_function_0(pyb_usart_receive));
        rt_store_attr(m, qstr_from_str_static("ustat"), rt_make_function_0(pyb_usart_status));
876
        rt_store_attr(m, qstr_from_str_static("rng"), rt_make_function_0(pyb_rng_get));
877
        rt_store_attr(m, qstr_from_str_static("Led"), rt_make_function_1(pyb_Led));
878
        rt_store_name(qstr_from_str_static("pyb"), m);
Damien's avatar
Damien committed
879
880

        rt_store_name(qstr_from_str_static("open"), rt_make_function_2(pyb_io_open));
881
    }
882

883
884
    // print a message to the LCD
    lcd_print_str(" micro py board\n");
Damien's avatar
Damien committed
885

886
887
888
889
890
891
892
893
894
895
896
897
898
    // check if user switch held (initiates reset of filesystem)
    bool reset_filesystem = false;
    if (sw_get()) {
        reset_filesystem = true;
        for (int i = 0; i < 50; i++) {
            if (!sw_get()) {
                reset_filesystem = false;
                break;
            }
            sys_tick_delay_ms(10);
        }
    }

899
900
901
902
    // local filesystem init
    {
        // try to mount the flash
        FRESULT res = f_mount(&fatfs0, "0:", 1);
903
        if (!reset_filesystem && res == FR_OK) {
904
            // mount sucessful
905
        } else if (reset_filesystem || res == FR_NO_FILESYSTEM) {
906
            // no filesystem, so create a fresh one
907
            // TODO doesn't seem to work correctly when reset_filesystem is true...
908
909
910
911
912
913
914
915
916
917
918
919

            // LED on to indicate creation of LFS
            led_state(PYB_LED_R2, 1);
            uint32_t stc = sys_tick_counter;

            res = f_mkfs("0:", 0, 0);
            if (res == FR_OK) {
                // success creating fresh LFS
            } else {
                __fatal_error("could not create LFS");
            }

920
921
            // keep LED on for at least 200ms
            sys_tick_wait_at_least(stc, 200);
922
923
924
925
            led_state(PYB_LED_R2, 0);
        } else {
            __fatal_error("could not access LFS");
        }
Damien's avatar
Damien committed
926
927
    }

928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
    // make sure we have a /boot.py
    {
        FILINFO fno;
        FRESULT res = f_stat("0:/boot.py", &fno);
        if (res == FR_OK) {
            if (fno.fattrib & AM_DIR) {
                // exists as a directory
                // TODO handle this case
                // see http://elm-chan.org/fsw/ff/img/app2.c for a "rm -rf" implementation
            } else {
                // exists as a file, good!
            }
        } else {
            // doesn't exist, create fresh file

            // LED on to indicate creation of boot.py
            led_state(PYB_LED_R2, 1);
            uint32_t stc = sys_tick_counter;

            FIL fp;
            f_open(&fp, "0:/boot.py", FA_WRITE | FA_CREATE_ALWAYS);
            UINT n;
950
            f_write(&fp, fresh_boot_py, sizeof(fresh_boot_py) - 1 /* don't count null terminator */, &n);
951
952
953
            // TODO check we could write n bytes
            f_close(&fp);

954
955
            // keep LED on for at least 200ms
            sys_tick_wait_at_least(stc, 200);
956
957
958
959
            led_state(PYB_LED_R2, 0);
        }
    }

960
961
962
963
964
    // run /boot.py
    if (!do_file("0:/boot.py")) {
        flash_error(4);
    }

965
966
967
    // USB
    usb_init();

Damien's avatar
Damien committed
968
    // MMA
969
    if (first_soft_reset) {
Damien's avatar
Damien committed
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
        // init and reset address to zero
        mma_init();
        mma_start(MMA_ADDR, 1);
        mma_send_byte(0);
        mma_stop();

        /*
        // read and print all 11 registers
        mma_start(MMA_ADDR, 1);
        mma_send_byte(0);
        mma_restart(MMA_ADDR, 0);
        for (int i = 0; i <= 0xa; i++) {
            int data;
            if (i == 0xa) {
                data = mma_read_nack();
            } else {
                data = mma_read_ack();
            }
            printf(" %02x", data);
        }
        printf("\n");
        */

        // put into active mode
        mma_start(MMA_ADDR, 1);
        mma_send_byte(7); // mode
        mma_send_byte(1); // active mode
        mma_stop();

        /*
        // infinite loop to read values
        for (;;) {
            sys_tick_delay_ms(500);

            mma_start(MMA_ADDR, 1);
            mma_send_byte(0);
            mma_restart(MMA_ADDR, 0);
            for (int i = 0; i <= 3; i++) {
                int data;
                if (i == 3) {
                    data = mma_read_nack();
                    printf(" %02x\n", data);
                } else {
                    data = mma_read_ack() & 0x3f;
                    if (data & 0x20) {
                        data |= ~0x1f;
                    }
                    printf(" % 2d", data);
                }
            }
        }
        */
    }

1024
1025
    // turn boot-up LED off
    led_state(PYB_LED_G1, 0);
1026

1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
    // run main script
    {
        vstr_t *vstr = vstr_new();
        vstr_add_str(vstr, "0:/");
        if (pyb_config_source_dir == 0) {
            vstr_add_str(vstr, "src");
        } else {
            vstr_add_str(vstr, qstr_str(pyb_config_source_dir));
        }
        vstr_add_char(vstr, '/');
        if (pyb_config_main == 0) {
            vstr_add_str(vstr, "main.py");
        } else {
            vstr_add_str(vstr, qstr_str(pyb_config_main));
        }
        if (!do_file(vstr_str(vstr))) {
            flash_error(3);
1044
        }
1045
        vstr_free(vstr);
1046
1047
    }

Damien's avatar
Damien committed
1048
    //printf("init;al=%u\n", m_get_total_bytes_allocated()); // 1600, due to qstr_init
1049
    //sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
1050
1051

    // Python!
1052
    if (0) {
Damien's avatar
Damien committed
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
        //const char *pysrc = "def f():\n  x=x+1\nprint(42)\n";
        const char *pysrc =
            // impl01.py
            /*
            "x = 0\n"
            "while x < 400:\n"
            "    y = 0\n"
            "    while y < 400:\n"
            "        z = 0\n"
            "        while z < 400:\n"
            "            z = z + 1\n"
            "        y = y + 1\n"
            "    x = x + 1\n";
            */
            // impl02.py
1068
            /*
Damien's avatar
Damien committed
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
            "#@micropython.native\n"
            "def f():\n"
            "    x = 0\n"
            "    while x < 400:\n"
            "        y = 0\n"
            "        while y < 400:\n"
            "            z = 0\n"
            "            while z < 400:\n"
            "                z = z + 1\n"
            "            y = y + 1\n"
            "        x = x + 1\n"
            "f()\n";
1081
            */
1082
            /*
Damien's avatar
Damien committed
1083
1084
1085
1086
1087
1088
1089
            "print('in python!')\n"
            "x = 0\n"
            "while x < 4:\n"
            "    pyb_led(True)\n"
            "    pyb_delay(201)\n"
            "    pyb_led(False)\n"
            "    pyb_delay(201)\n"
1090
            "    x += 1\n"
Damien's avatar
Damien committed
1091
1092
1093
            "print('press me!')\n"
            "while True:\n"
            "    pyb_led(pyb_sw())\n";
1094
            */
Damien's avatar
Damien committed
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
            /*
            // impl16.py
            "@micropython.asm_thumb\n"
            "def delay(r0):\n"
            "    b(loop_entry)\n"
            "    label(loop1)\n"
            "    movw(r1, 55999)\n"
            "    label(loop2)\n"
            "    subs(r1, r1, 1)\n"
            "    cmp(r1, 0)\n"
            "    bgt(loop2)\n"
            "    subs(r0, r0, 1)\n"
            "    label(loop_entry)\n"
            "    cmp(r0, 0)\n"
            "    bgt(loop1)\n"
            "print('in python!')\n"
            "@micropython.native\n"
            "def flash(n):\n"
            "    x = 0\n"
            "    while x < n:\n"
            "        pyb_led(True)\n"
            "        delay(249)\n"
            "        pyb_led(False)\n"
            "        delay(249)\n"
            "        x = x + 1\n"
            "flash(20)\n";
            */
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
            // impl18.py
            /*
            "# basic exceptions\n"
            "x = 1\n"
            "try:\n"
            "    x.a()\n"
            "except:\n"
            "    print(x)\n";
            */
            // impl19.py
            "# for loop\n"
            "def f():\n"
            "    for x in range(400):\n"
            "        for y in range(400):\n"
            "            for z in range(400):\n"
            "                pass\n"
            "f()\n";
Damien's avatar
Damien committed
1139

1140
1141
        py_lexer_str_buf_t py_lexer_str_buf;
        py_lexer_t *lex = py_lexer_new_from_str_len("<stdin>", pysrc, strlen(pysrc), false, &py_lexer_str_buf);
Damien's avatar
Damien committed
1142

1143
1144
1145
1146
1147
1148
        // nalloc=1740;6340;6836 -> 140;4600;496 bytes for lexer, parser, compiler
        printf("lex; al=%u\n", m_get_total_bytes_allocated());
        sys_tick_delay_ms(1000);
        py_parse_node_t pn = py_parse(lex, PY_PARSE_FILE_INPUT);
        py_lexer_free(lex);
        if (pn != PY_PARSE_NODE_NULL) {
Damien's avatar
Damien committed
1149
            printf("pars;al=%u\n", m_get_total_bytes_allocated());
1150
            sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
1151
            //parse_node_show(pn, 0);
1152
            bool comp_ok = py_compile(pn, false);
Damien's avatar
Damien committed
1153
            printf("comp;al=%u\n", m_get_total_bytes_allocated());
1154
            sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
1155

1156
1157
1158
            if (!comp_ok) {
                printf("compile error\n");
            } else {
Damien's avatar
Damien committed
1159
1160
1161
1162
                // execute it!

                py_obj_t module_fun = rt_make_function_from_id(1);

1163
                // flash once
1164
                led_state(PYB_LED_G1, 1);
1165
                sys_tick_delay_ms(100);
1166
                led_state(PYB_LED_G1, 0);
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182

                nlr_buf_t nlr;
                if (nlr_push(&nlr) == 0) {
                    py_obj_t ret = rt_call_function_0(module_fun);
                    printf("done! got: ");
                    py_obj_print(ret);
                    printf("\n");
                    nlr_pop();
                } else {
                    // uncaught exception
                    printf("exception: ");
                    py_obj_print((py_obj_t)nlr.ret_val);
                    printf("\n");
                }

                // flash once
1183
                led_state(PYB_LED_G1, 1);
1184
                sys_tick_delay_ms(100);
1185
                led_state(PYB_LED_G1, 0);
Damien's avatar
Damien committed
1186

1187
                sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
1188
                printf("nalloc=%u\n", m_get_total_bytes_allocated());
1189
                sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
1190
1191
1192
1193
            }
        }
    }

1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
    // HID example
    if (0) {
        uint8_t data[4];
        data[0] = 0;
        data[1] = 1;
        data[2] = -2;
        data[3] = 0;
        for (;;) {
            if (sw_get()) {
                data[0] = 0x01; // 0x04 is middle, 0x02 is right
            } else {
                data[0] = 0x00;
            }
            mma_start(MMA_ADDR, 1);
            mma_send_byte(0);
            mma_restart(MMA_ADDR, 0);
            for (int i = 0; i <= 1; i++) {
                int v = mma_read_ack() & 0x3f;
                if (v & 0x20) {
                    v |= ~0x1f;
                }
                data[1 + i] = v;
            }
            mma_read_nack();
            usb_hid_send_report(data);
            sys_tick_delay_ms(15);
        }
    }

1223
    // wifi
1224
1225
    //pyb_wlan_init();
    //pyb_wlan_start();
1226

1227
1228
    do_repl();

Damien's avatar
Damien committed
1229
1230
    // benchmark C version of impl02.py
    if (0) {
1231
        led_state(PYB_LED_G1, 1);
1232
        sys_tick_delay_ms(100);
1233
        led_state(PYB_LED_G1, 0);
Damien's avatar
Damien committed
1234
        impl02_c_version();
1235
        led_state(PYB_LED_G1, 1);
1236
        sys_tick_delay_ms(100);
1237
        led_state(PYB_LED_G1, 0);
Damien's avatar
Damien committed
1238
1239
1240
    }

    // SD card testing
1241
1242
    if (1) {
        extern void sdio_init(void);
1243
        //sdio_init();
Damien's avatar
Damien committed
1244
1245
    }

1246
1247
1248
1249
    printf("PYB: sync filesystems\n");
    pyb_sync();

    printf("PYB: soft reboot\n");
1250
1251

    first_soft_reset = false;
1252
    goto soft_reset;
Damien's avatar
Damien committed
1253
}
1254
1255
1256
1257
1258

double __aeabi_f2d(float x) {
    // TODO
    return 0.0;
}
Damien's avatar
Damien committed
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268

float __aeabi_d2f(double x) {
    // TODO
    return 0.0;
}

double sqrt(double x) {
    // TODO
    return 0.0;
}
1269
1270
1271
1272
1273

machine_float_t machine_sqrt(machine_float_t x) {
    // TODO
    return x;
}