main.c 32.1 KB
Newer Older
1
#include <stdio.h>
Damien's avatar
Damien committed
2
3
#include <stm32f4xx.h>
#include <stm32f4xx_rcc.h>
4
#include <stm32f4xx_gpio.h>
5
#include <stm32f4xx_tim.h>
Damien's avatar
Damien committed
6
#include <stm32f4xx_pwr.h>
7
#include <stm32f4xx_rtc.h>
8
#include <stm32f4xx_usart.h>
9
#include <stm_misc.h>
Damien's avatar
Damien committed
10
11
#include "std.h"

12
#include "misc.h"
Damien's avatar
Damien committed
13
14
#include "mpyconfig.h"
#include "gc.h"
15
#include "systick.h"
16
#include "led.h"
17
#include "lcd.h"
18
#include "storage.h"
19
#include "mma.h"
20
#include "usart.h"
Damien's avatar
Damien committed
21
#include "usb.h"
22
#include "ff.h"
Damien's avatar
Damien committed
23

24
25
static FATFS fatfs0;

Damien's avatar
Damien committed
26
27
extern uint32_t _heap_start;

28
29
30
31
32
33
34
35
36
37
38
39
void flash_error(int n) {
    for (int i = 0; i < n; i++) {
        led_state(PYB_LED_R1, 1);
        led_state(PYB_LED_R2, 0);
        sys_tick_delay_ms(250);
        led_state(PYB_LED_R1, 0);
        led_state(PYB_LED_R2, 1);
        sys_tick_delay_ms(250);
    }
    led_state(PYB_LED_R2, 0);
}

40
static void impl02_c_version(void) {
Damien's avatar
Damien committed
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
    int x = 0;
    while (x < 400) {
        int y = 0;
        while (y < 400) {
            volatile int z = 0;
            while (z < 400) {
                z = z + 1;
            }
            y = y + 1;
        }
        x = x + 1;
    }
}

#define PYB_USRSW_PORT (GPIOA)
56
#define PYB_USRSW_PIN (GPIO_Pin_13)
Damien's avatar
Damien committed
57

58
void sw_init(void) {
Damien's avatar
Damien committed
59
    // make it an input with pull-up
60
61
62
63
64
    GPIO_InitTypeDef GPIO_InitStructure;
    GPIO_InitStructure.GPIO_Pin = PYB_USRSW_PIN;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
    GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
    GPIO_Init(PYB_USRSW_PORT, &GPIO_InitStructure);
Damien's avatar
Damien committed
65
66
}

67
int sw_get(void) {
68
    if (PYB_USRSW_PORT->IDR & PYB_USRSW_PIN) {
Damien's avatar
Damien committed
69
70
71
72
73
74
75
76
77
78
79
80
        // pulled high, so switch is not pressed
        return 0;
    } else {
        // pulled low, so switch is pressed
        return 1;
    }
}

void __fatal_error(const char *msg) {
    lcd_print_strn("\nFATAL ERROR:\n", 14);
    lcd_print_strn(msg, strlen(msg));
    for (;;) {
81
        flash_error(1);
Damien's avatar
Damien committed
82
83
84
    }
}

85
#include "nlr.h"
Damien's avatar
Damien committed
86
87
#include "misc.h"
#include "lexer.h"
88
#include "lexerstm.h"
Damien's avatar
Damien committed
89
90
91
92
#include "mpyconfig.h"
#include "parse.h"
#include "compile.h"
#include "runtime.h"
93
94
#include "repl.h"

95
96
97
static qstr pyb_config_source_dir = 0;
static qstr pyb_config_main = 0;

98
py_obj_t pyb_source_dir(py_obj_t source_dir) {
Damien's avatar
Damien committed
99
    pyb_config_source_dir = py_obj_get_qstr(source_dir);
100
101
102
103
    return py_const_none;
}

py_obj_t pyb_main(py_obj_t main) {
Damien's avatar
Damien committed
104
    pyb_config_main = py_obj_get_qstr(main);
105
106
107
108
    return py_const_none;
}

// sync all file systems
109
py_obj_t pyb_sync(void) {
110
    storage_flush();
111
112
    return py_const_none;
}
Damien's avatar
Damien committed
113
114

py_obj_t pyb_delay(py_obj_t count) {
Damien's avatar
Damien committed
115
    sys_tick_delay_ms(py_obj_get_int(count));
Damien's avatar
Damien committed
116
117
118
119
    return py_const_none;
}

py_obj_t pyb_led(py_obj_t state) {
120
    led_state(PYB_LED_G1, rt_is_true(state));
Damien's avatar
Damien committed
121
122
123
    return state;
}

124
py_obj_t pyb_sw(void) {
Damien's avatar
Damien committed
125
126
127
128
129
130
131
    if (sw_get()) {
        return py_const_true;
    } else {
        return py_const_false;
    }
}

132
/*
133
134
135
136
137
138
void g(uint i) {
    printf("g:%d\n", i);
    if (i & 1) {
        nlr_jump((void*)(42 + i));
    }
}
139
void f(void) {
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
    nlr_buf_t nlr;
    int i;
    for (i = 0; i < 4; i++) {
        printf("f:loop:%d:%p\n", i, &nlr);
        if (nlr_push(&nlr) == 0) {
            // normal
            //printf("a:%p:%p %p %p %u\n", &nlr, nlr.ip, nlr.sp, nlr.prev, nlr.ret_val);
            g(i);
            printf("f:lp:%d:nrm\n", i);
            nlr_pop();
        } else {
            // nlr
            //printf("b:%p:%p %p %p %u\n", &nlr, nlr.ip, nlr.sp, nlr.prev, nlr.ret_val);
            printf("f:lp:%d:nlr:%d\n", i, (int)nlr.ret_val);
        }
    }
}
157
void nlr_test(void) {
158
159
    f(1);
}
160
161
*/

162
void fatality(void) {
163
164
165
166
167
168
    led_state(PYB_LED_R1, 1);
    led_state(PYB_LED_G1, 1);
    led_state(PYB_LED_R2, 1);
    led_state(PYB_LED_G2, 1);
}

169
static const char fresh_boot_py[] =
170
171
172
173
174
175
176
177
178
179
180
181
"# boot.py -- run on boot-up\n"
"# can run arbitrary Python, but best to keep it minimal\n"
"\n"
"pyb.source_dir('/src')\n"
"pyb.main('main.py')\n"
"#pyb.usb_usr('VCP')\n"
"#pyb.usb_msd(True, 'dual partition')\n"
"#pyb.flush_cache(False)\n"
"#pyb.error_log('error.txt')\n"
;

// get lots of info about the board
182
static py_obj_t pyb_info(void) {
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
    // get and print clock speeds
    // SYSCLK=168MHz, HCLK=168MHz, PCLK1=42MHz, PCLK2=84MHz
    {
        RCC_ClocksTypeDef rcc_clocks;
        RCC_GetClocksFreq(&rcc_clocks);
        printf("S=%lu\nH=%lu\nP1=%lu\nP2=%lu\n", rcc_clocks.SYSCLK_Frequency, rcc_clocks.HCLK_Frequency, rcc_clocks.PCLK1_Frequency, rcc_clocks.PCLK2_Frequency);
    }

    // to print info about memory
    {
        extern void *_sidata;
        extern void *_sdata;
        extern void *_edata;
        extern void *_sbss;
        extern void *_ebss;
        extern void *_estack;
        extern void *_etext;
        printf("_sidata=%p\n", &_sidata);
        printf("_sdata=%p\n", &_sdata);
        printf("_edata=%p\n", &_edata);
        printf("_sbss=%p\n", &_sbss);
        printf("_ebss=%p\n", &_ebss);
        printf("_estack=%p\n", &_estack);
        printf("_etext=%p\n", &_etext);
        printf("_heap_start=%p\n", &_heap_start);
    }

210
211
212
213
214
215
216
217
218
219
    // GC info
    {
        gc_info_t info;
        gc_info(&info);
        printf("GC:\n");
        printf("  %lu total\n", info.total);
        printf("  %lu : %lu\n", info.used, info.free);
        printf("  1=%lu 2=%lu m=%lu\n", info.num_1block, info.num_2block, info.max_block);
    }

220
221
222
223
224
    // free space on flash
    {
        DWORD nclst;
        FATFS *fatfs;
        f_getfree("0:", &nclst, &fatfs);
225
        printf("LFS free: %u bytes\n", (uint)(nclst * fatfs->csize * 512));
226
    }
227
228

    return py_const_none;
229
230
}

231
py_obj_t pyb_usart_send(py_obj_t data) {
Damien's avatar
Damien committed
232
    usart_tx_char(py_obj_get_int(data));
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
    return py_const_none;
}

py_obj_t pyb_usart_receive(void) {
    return py_obj_new_int(usart_rx_char());
}

py_obj_t pyb_usart_status(void) {
    if (usart_rx_any()) {
        return py_const_true;
    } else {
        return py_const_false;
    }
}

Damien's avatar
Damien committed
248
249
250
251
252
253
254
255
256
257
258
259
char *strdup(const char *str) {
    uint32_t len = strlen(str);
    char *s2 = m_new(char, len + 1);
    memcpy(s2, str, len);
    s2[len] = 0;
    return s2;
}

#define READLINE_HIST_SIZE (8)

static const char *readline_hist[READLINE_HIST_SIZE] = {NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL};

260
261
262
263
264
void stdout_tx_str(const char *str) {
    usart_tx_str(str);
    usb_vcp_send_str(str);
}

265
int readline(vstr_t *line, const char *prompt) {
266
    stdout_tx_str(prompt);
267
    int len = vstr_len(line);
Damien's avatar
Damien committed
268
269
    int escape = 0;
    int hist_num = 0;
270
    for (;;) {
271
272
273
274
275
276
277
278
279
        char c;
        for (;;) {
            if (usb_vcp_rx_any() != 0) {
                c = usb_vcp_rx_get();
                break;
            } else if (usart_rx_any()) {
                c = usart_rx_char();
                break;
            }
Damien's avatar
Damien committed
280
            sys_tick_delay_ms(1);
281
        }
Damien's avatar
Damien committed
282
283
284
285
        if (escape == 0) {
            if (c == 4 && vstr_len(line) == len) {
                return 0;
            } else if (c == '\r') {
286
                stdout_tx_str("\r\n");
Damien's avatar
Damien committed
287
288
289
290
291
292
293
294
295
296
                for (int i = READLINE_HIST_SIZE - 1; i > 0; i--) {
                    readline_hist[i] = readline_hist[i - 1];
                }
                readline_hist[0] = strdup(vstr_str(line));
                return 1;
            } else if (c == 27) {
                escape = true;
            } else if (c == 127) {
                if (vstr_len(line) > len) {
                    vstr_cut_tail(line, 1);
297
                    stdout_tx_str("\b \b");
Damien's avatar
Damien committed
298
299
300
                }
            } else if (32 <= c && c <= 126) {
                vstr_add_char(line, c);
301
                stdout_tx_str(line->buf + line->len - 1);
302
            }
Damien's avatar
Damien committed
303
304
305
306
307
308
309
310
311
312
313
314
315
        } else if (escape == 1) {
            if (c == '[') {
                escape = 2;
            } else {
                escape = 0;
            }
        } else if (escape == 2) {
            escape = 0;
            if (c == 'A') {
                // up arrow
                if (hist_num < READLINE_HIST_SIZE && readline_hist[hist_num] != NULL) {
                    // erase line
                    for (int i = line->len - len; i > 0; i--) {
316
                        stdout_tx_str("\b \b");
Damien's avatar
Damien committed
317
318
319
320
321
                    }
                    // set line to history
                    line->len = len;
                    vstr_add_str(line, readline_hist[hist_num]);
                    // draw line
322
                    stdout_tx_str(readline_hist[hist_num]);
Damien's avatar
Damien committed
323
324
325
326
327
328
                    // increase hist num
                    hist_num += 1;
                }
            }
        } else {
            escape = 0;
329
        }
Damien's avatar
Damien committed
330
        sys_tick_delay_ms(10);
331
    }
332
333
}

334
void do_repl(void) {
335
336
    stdout_tx_str("Micro Python 0.5; STM32F405RG; PYBv2\r\n");
    stdout_tx_str("Type \"help\" for more information.\r\n");
337
338
339

    vstr_t line;
    vstr_init(&line);
340
341

    for (;;) {
342
343
344
        vstr_reset(&line);
        int ret = readline(&line, ">>> ");
        if (ret == 0) {
345
            // EOF
346
347
348
349
350
            break;
        }

        if (vstr_len(&line) == 0) {
            continue;
351
        }
352
353

        if (py_repl_is_compound_stmt(vstr_str(&line))) {
354
            for (;;) {
355
356
357
358
359
                vstr_add_char(&line, '\n');
                int len = vstr_len(&line);
                int ret = readline(&line, "... ");
                if (ret == 0 || vstr_len(&line) == len) {
                    // done entering compound statement
360
361
362
363
364
365
                    break;
                }
            }
        }

        py_lexer_str_buf_t sb;
366
        py_lexer_t *lex = py_lexer_new_from_str_len("<stdin>", vstr_str(&line), vstr_len(&line), false, &sb);
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
        py_parse_node_t pn = py_parse(lex, PY_PARSE_SINGLE_INPUT);
        py_lexer_free(lex);

        if (pn != PY_PARSE_NODE_NULL) {
            bool comp_ok = py_compile(pn, true);
            if (comp_ok) {
                py_obj_t module_fun = rt_make_function_from_id(1);
                if (module_fun != py_const_none) {
                    nlr_buf_t nlr;
                    if (nlr_push(&nlr) == 0) {
                        rt_call_function_0(module_fun);
                        nlr_pop();
                    } else {
                        // uncaught exception
                        py_obj_print((py_obj_t)nlr.ret_val);
                        printf("\n");
                    }
                }
            }
        }
    }
388

389
    stdout_tx_str("\r\n");
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
}

bool do_file(const char *filename) {
    py_lexer_file_buf_t fb;
    py_lexer_t *lex = py_lexer_new_from_file(filename, &fb);

    if (lex == NULL) {
        printf("could not open file '%s' for reading\n", filename);
        return false;
    }

    py_parse_node_t pn = py_parse(lex, PY_PARSE_FILE_INPUT);
    py_lexer_free(lex);

    if (pn == PY_PARSE_NODE_NULL) {
        return false;
    }

    bool comp_ok = py_compile(pn, false);
    if (!comp_ok) {
        return false;
    }

    py_obj_t module_fun = rt_make_function_from_id(1);
    if (module_fun == py_const_none) {
        return false;
    }

    nlr_buf_t nlr;
    if (nlr_push(&nlr) == 0) {
        rt_call_function_0(module_fun);
        nlr_pop();
        return true;
    } else {
        // uncaught exception
        py_obj_print((py_obj_t)nlr.ret_val);
        printf("\n");
        return false;
    }
429
430
}

431
432
433
434
435
436
#define RAM_START (0x20000000) // fixed for chip
#define HEAP_END  (0x2001c000) // tunable
#define RAM_END   (0x20020000) // fixed for chip

void gc_helper_get_regs_and_clean_stack(machine_uint_t *regs, machine_uint_t heap_end);

437
void gc_collect(void) {
438
    uint32_t start = sys_tick_counter;
Damien's avatar
Damien committed
439
    gc_collect_start();
440
441
442
443
    gc_collect_root((void**)RAM_START, (((uint32_t)&_heap_start) - RAM_START) / 4);
    machine_uint_t regs[10];
    gc_helper_get_regs_and_clean_stack(regs, HEAP_END);
    gc_collect_root((void**)HEAP_END, (RAM_END - HEAP_END) / 4); // will trace regs since they now live in this function on the stack
Damien's avatar
Damien committed
444
    gc_collect_end();
445
446
447
448
449
450
451
452
453
    uint32_t ticks = sys_tick_counter - start; // TODO implement a function that does this properly
    gc_info_t info;
    gc_info(&info);
    printf("GC@%lu %lums\n", start, ticks);
    printf(" %lu total\n", info.total);
    printf(" %lu : %lu\n", info.used, info.free);
    printf(" 1=%lu 2=%lu m=%lu\n", info.num_1block, info.num_2block, info.max_block);
}

454
py_obj_t pyb_gc(void) {
455
456
    gc_collect();
    return py_const_none;
Damien's avatar
Damien committed
457
458
}

459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
// PWM
// TIM2 and TIM5 have CH1, CH2, CH3, CH4 on PA0-PA3 respectively
// they are both 32-bit counters
// 16-bit prescaler
// TIM2_CH3 also on PB10 (used below)
void servo_init(void) {
    // TIM2 clock enable
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);

    // GPIOC Configuration: TIM2_CH3 (PB10)
    GPIO_InitTypeDef GPIO_InitStructure;
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
    GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
    GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
    GPIO_Init(GPIOB, &GPIO_InitStructure);

    // Connect TIM2 pins to AF1
    GPIO_PinAFConfig(GPIOB, GPIO_PinSource10, GPIO_AF_TIM2);

    // Compute the prescaler value so TIM2 runs at 100kHz
    uint16_t PrescalerValue = (uint16_t) ((SystemCoreClock / 2) / 100000) - 1;

    // Time base configuration
    TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
    TIM_TimeBaseStructure.TIM_Period = 2000; // timer cycles at 50Hz
    TIM_TimeBaseStructure.TIM_Prescaler = PrescalerValue;
    TIM_TimeBaseStructure.TIM_ClockDivision = 0;
    TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
    TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);

    // PWM1 Mode configuration: Channel1
    TIM_OCInitTypeDef TIM_OCInitStructure;
    TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;
    TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
    TIM_OCInitStructure.TIM_Pulse = 150; // units of 10us
    TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High;
    TIM_OC3Init(TIM2, &TIM_OCInitStructure);

    // ?
    TIM_OC3PreloadConfig(TIM2, TIM_OCPreload_Enable);

    // ?
    TIM_ARRPreloadConfig(TIM2, ENABLE);

    // TIM2 enable counter
    TIM_Cmd(TIM2, ENABLE);
}

py_obj_t pyb_servo_set(py_obj_t value) {
Damien's avatar
Damien committed
510
    int v = py_obj_get_int(value);
511
512
513
514
515
516
    if (v < 100) { v = 100; }
    if (v > 200) { v = 200; }
    TIM2->CCR3 = v;
    return py_const_none;
}

Damien's avatar
Damien committed
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
#define MMA_ADDR (0x4c)

py_obj_t pyb_mma_read() {
    mma_start(MMA_ADDR, 1);
    mma_send_byte(0);
    mma_restart(MMA_ADDR, 0);
    py_obj_t data[4];
    for (int i = 3; i >= 1; i--) {
        int v = mma_read_ack() & 0x3f;
        if (v & 0x20) {
            v |= ~0x1f;
        }
        data[i] = py_obj_new_int(v);
    }
    data[0] = py_obj_new_int(mma_read_nack());
    return rt_build_tuple(4, data); // items in reverse order in data
}

535
py_obj_t pyb_hid_send_report(py_obj_t arg) {
Damien's avatar
Damien committed
536
    py_obj_t *items = py_obj_get_array_fixed_n(arg, 4);
537
    uint8_t data[4];
Damien's avatar
Damien committed
538
539
540
541
    data[0] = py_obj_get_int(items[0]);
    data[1] = py_obj_get_int(items[1]);
    data[2] = py_obj_get_int(items[2]);
    data[3] = py_obj_get_int(items[3]);
542
543
544
545
    usb_hid_send_report(data);
    return py_const_none;
}

546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
static void rtc_init(void) {
    /* Enable the PWR clock */
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);

    /* Allow access to RTC */
    PWR_BackupAccessCmd(ENABLE);

    /* Enable the LSE OSC */
    RCC_LSEConfig(RCC_LSE_ON);

    /* Wait till LSE is ready */
    while(RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET) {
    }

    /* Select the RTC Clock Source */
    RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);
    /* ck_spre(1Hz) = RTCCLK(LSE) /(uwAsynchPrediv + 1)*(uwSynchPrediv + 1)*/
    uint32_t uwSynchPrediv = 0xFF;
    uint32_t uwAsynchPrediv = 0x7F;

    /* Enable the RTC Clock */
    RCC_RTCCLKCmd(ENABLE);

    /* Wait for RTC APB registers synchronisation */
    RTC_WaitForSynchro();

    /* Configure the RTC data register and RTC prescaler */
    RTC_InitTypeDef RTC_InitStructure;
    RTC_InitStructure.RTC_AsynchPrediv = uwAsynchPrediv;
    RTC_InitStructure.RTC_SynchPrediv = uwSynchPrediv;
    RTC_InitStructure.RTC_HourFormat = RTC_HourFormat_24;
    RTC_Init(&RTC_InitStructure);

    // Set the date (BCD)
    RTC_DateTypeDef RTC_DateStructure;
    RTC_DateStructure.RTC_Year = 0x13;
    RTC_DateStructure.RTC_Month = RTC_Month_October;
    RTC_DateStructure.RTC_Date = 0x26;
    RTC_DateStructure.RTC_WeekDay = RTC_Weekday_Saturday;
    RTC_SetDate(RTC_Format_BCD, &RTC_DateStructure);

    // Set the time (BCD)
    RTC_TimeTypeDef RTC_TimeStructure;
    RTC_TimeStructure.RTC_H12     = RTC_H12_AM;
    RTC_TimeStructure.RTC_Hours   = 0x01;
    RTC_TimeStructure.RTC_Minutes = 0x53;
    RTC_TimeStructure.RTC_Seconds = 0x00;
    RTC_SetTime(RTC_Format_BCD, &RTC_TimeStructure);

    // Indicator for the RTC configuration
    //RTC_WriteBackupRegister(RTC_BKP_DR0, 0x32F2);
}

py_obj_t pyb_rtc_read(void) {
    RTC_TimeTypeDef RTC_TimeStructure;
    RTC_GetTime(RTC_Format_BIN, &RTC_TimeStructure);
    printf("%02d:%02d:%02d\n", RTC_TimeStructure.RTC_Hours, RTC_TimeStructure.RTC_Minutes, RTC_TimeStructure.RTC_Seconds);
    return py_const_none;
}

606
py_obj_t pyb_lcd8(py_obj_t pos, py_obj_t val) {
Damien's avatar
Damien committed
607
608
    int pos_val = py_obj_get_int(pos);
    int val_val = py_obj_get_int(val);
609
610
611
612
    lcd_draw_pixel_8(pos_val, val_val);
    return py_const_none;
}

Damien's avatar
Damien committed
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
void file_obj_print(py_obj_t o) {
    FIL *fp;
    py_user_get_data(o, (machine_uint_t*)&fp, NULL);
    printf("<file %p>", fp);
}

py_obj_t file_obj_read(py_obj_t self, py_obj_t arg) {
    FIL *fp;
    py_user_get_data(self, (machine_uint_t*)&fp, NULL);
    int n = py_obj_get_int(arg);
    char *buf = m_new(char, n + 1);
    UINT n_out;
    f_read(fp, buf, n, &n_out);
    buf[n_out] = 0;
    return py_obj_new_str(qstr_from_str_take(buf));
}

py_obj_t file_obj_write(py_obj_t self, py_obj_t arg) {
    FIL *fp;
    py_user_get_data(self, (machine_uint_t*)&fp, NULL);
    const char *s = qstr_str(py_obj_get_qstr(arg));
    UINT n_out;
    FRESULT res = f_write(fp, s, strlen(s), &n_out);
    if (res != FR_OK) {
        printf("File error: could not write to file; error code %d\n", res);
    } else if (n_out != strlen(s)) {
        printf("File error: could not write all data to file; wrote %d / %d bytes\n", n_out, strlen(s));
    }
    return py_const_none;
}

py_obj_t file_obj_close(py_obj_t self) {
    FIL *fp;
    py_user_get_data(self, (machine_uint_t*)&fp, NULL);
    f_close(fp);
    return py_const_none;
}

// TODO gc hook to close the file if not already closed
const py_user_info_t file_obj_info = {
    "File",
    file_obj_print,
    {
        {"read", 1, file_obj_read},
        {"write", 1, file_obj_write},
        {"close", 0, file_obj_close},
        {NULL, 0, NULL},
    }
};

py_obj_t pyb_io_open(py_obj_t o_filename, py_obj_t o_mode) {
    const char *filename = qstr_str(py_obj_get_qstr(o_filename));
    const char *mode = qstr_str(py_obj_get_qstr(o_mode));
    FIL *fp = m_new(FIL, 1);
    if (mode[0] == 'r') {
        // open for reading
        FRESULT res = f_open(fp, filename, FA_READ);
        if (res != FR_OK) {
            printf("FileNotFoundError: [Errno 2] No such file or directory: '%s'\n", filename);
            return py_const_none;
        }
    } else if (mode[0] == 'w') {
        // open for writing, truncate the file first
        FRESULT res = f_open(fp, filename, FA_WRITE | FA_CREATE_ALWAYS);
        if (res != FR_OK) {
            printf("?FileError: could not create file: '%s'\n", filename);
            return py_const_none;
        }
    } else {
        printf("ValueError: invalid mode: '%s'\n", mode);
        return py_const_none;
    }
    return py_obj_new_user(&file_obj_info, (machine_uint_t)fp, 0);
}

688
int main(void) {
689
    // TODO disable JTAG
Damien's avatar
Damien committed
690

691
692
693
694
695
696
    // set interrupt priority config to use all 4 bits for pre-empting
    NVIC_PriorityGroupConfig(NVIC_PriorityGroup_4);

    // enable the CCM RAM and the GPIO's
    RCC->AHB1ENR |= RCC_AHB1ENR_CCMDATARAMEN | RCC_AHB1ENR_GPIOAEN | RCC_AHB1ENR_GPIOBEN | RCC_AHB1ENR_GPIOCEN;

697
    // configure SDIO pins to be high to start with (apparently makes it more robust)
698
699
700
701
702
703
704
705
706
707
708
709
710
711
    {
      GPIO_InitTypeDef GPIO_InitStructure;
      GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | GPIO_Pin_11 | GPIO_Pin_12;
      GPIO_InitStructure.GPIO_Speed = GPIO_Speed_25MHz;
      GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
      GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
      GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
      GPIO_Init(GPIOC, &GPIO_InitStructure);

      // Configure PD.02 CMD line
      GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
      GPIO_Init(GPIOD, &GPIO_InitStructure);
    }

712
713
    // basic sub-system init
    sys_tick_init();
Damien's avatar
Damien committed
714
    led_init();
715
    rtc_init();
716
717
718
719
720

    // turn on LED to indicate bootup
    led_state(PYB_LED_G1, 1);

    // more sub-system init
Damien's avatar
Damien committed
721
    sw_init();
722
    storage_init();
723
    usart_init();
Damien's avatar
Damien committed
724

725
726
727
728
729
soft_reset:

    // LCD init
    lcd_init();

Damien's avatar
Damien committed
730
    // GC init
731
    gc_init(&_heap_start, (void*)HEAP_END);
Damien's avatar
Damien committed
732

733
    // Micro Python init
734
735
    qstr_init();
    rt_init();
736

737
738
739
    // servo
    servo_init();

740
    // add some functions to the python namespace
741
742
743
744
745
    {
        py_obj_t m = py_module_new();
        rt_store_attr(m, qstr_from_str_static("info"), rt_make_function_0(pyb_info));
        rt_store_attr(m, qstr_from_str_static("source_dir"), rt_make_function_1(pyb_source_dir));
        rt_store_attr(m, qstr_from_str_static("main"), rt_make_function_1(pyb_main));
746
        rt_store_attr(m, qstr_from_str_static("sync"), rt_make_function_0(pyb_sync));
747
748
749
750
        rt_store_attr(m, qstr_from_str_static("gc"), rt_make_function_0(pyb_gc));
        rt_store_attr(m, qstr_from_str_static("delay"), rt_make_function_1(pyb_delay));
        rt_store_attr(m, qstr_from_str_static("led"), rt_make_function_1(pyb_led));
        rt_store_attr(m, qstr_from_str_static("sw"), rt_make_function_0(pyb_sw));
751
        rt_store_attr(m, qstr_from_str_static("servo"), rt_make_function_1(pyb_servo_set));
Damien's avatar
Damien committed
752
        rt_store_attr(m, qstr_from_str_static("mma"), rt_make_function_0(pyb_mma_read));
753
        rt_store_attr(m, qstr_from_str_static("hid"), rt_make_function_1(pyb_hid_send_report));
754
        rt_store_attr(m, qstr_from_str_static("time"), rt_make_function_0(pyb_rtc_read));
755
756
757
        rt_store_attr(m, qstr_from_str_static("uout"), rt_make_function_1(pyb_usart_send));
        rt_store_attr(m, qstr_from_str_static("uin"), rt_make_function_0(pyb_usart_receive));
        rt_store_attr(m, qstr_from_str_static("ustat"), rt_make_function_0(pyb_usart_status));
758
        rt_store_attr(m, qstr_from_str_static("lcd8"), rt_make_function_2(pyb_lcd8));
759
        rt_store_name(qstr_from_str_static("pyb"), m);
Damien's avatar
Damien committed
760
761

        rt_store_name(qstr_from_str_static("open"), rt_make_function_2(pyb_io_open));
762
    }
763

764
765
    // print a message to the LCD
    lcd_print_str(" micro py board\n");
Damien's avatar
Damien committed
766

767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
    // local filesystem init
    {
        // try to mount the flash
        FRESULT res = f_mount(&fatfs0, "0:", 1);
        if (res == FR_OK) {
            // mount sucessful
        } else if (res == FR_NO_FILESYSTEM) {
            // no filesystem, so create a fresh one

            // LED on to indicate creation of LFS
            led_state(PYB_LED_R2, 1);
            uint32_t stc = sys_tick_counter;

            res = f_mkfs("0:", 0, 0);
            if (res == FR_OK) {
                // success creating fresh LFS
            } else {
                __fatal_error("could not create LFS");
            }

787
788
            // keep LED on for at least 200ms
            sys_tick_wait_at_least(stc, 200);
789
790
791
792
            led_state(PYB_LED_R2, 0);
        } else {
            __fatal_error("could not access LFS");
        }
Damien's avatar
Damien committed
793
794
    }

795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
    // make sure we have a /boot.py
    {
        FILINFO fno;
        FRESULT res = f_stat("0:/boot.py", &fno);
        if (res == FR_OK) {
            if (fno.fattrib & AM_DIR) {
                // exists as a directory
                // TODO handle this case
                // see http://elm-chan.org/fsw/ff/img/app2.c for a "rm -rf" implementation
            } else {
                // exists as a file, good!
            }
        } else {
            // doesn't exist, create fresh file

            // LED on to indicate creation of boot.py
            led_state(PYB_LED_R2, 1);
            uint32_t stc = sys_tick_counter;

            FIL fp;
            f_open(&fp, "0:/boot.py", FA_WRITE | FA_CREATE_ALWAYS);
            UINT n;
817
            f_write(&fp, fresh_boot_py, sizeof(fresh_boot_py) - 1 /* don't count null terminator */, &n);
818
819
820
            // TODO check we could write n bytes
            f_close(&fp);

821
822
            // keep LED on for at least 200ms
            sys_tick_wait_at_least(stc, 200);
823
824
825
826
            led_state(PYB_LED_R2, 0);
        }
    }

827
828
829
830
831
    // run /boot.py
    if (!do_file("0:/boot.py")) {
        flash_error(4);
    }

832
833
834
    // USB
    usb_init();

Damien's avatar
Damien committed
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
    // MMA
    {
        // init and reset address to zero
        mma_init();
        mma_start(MMA_ADDR, 1);
        mma_send_byte(0);
        mma_stop();

        /*
        // read and print all 11 registers
        mma_start(MMA_ADDR, 1);
        mma_send_byte(0);
        mma_restart(MMA_ADDR, 0);
        for (int i = 0; i <= 0xa; i++) {
            int data;
            if (i == 0xa) {
                data = mma_read_nack();
            } else {
                data = mma_read_ack();
            }
            printf(" %02x", data);
        }
        printf("\n");
        */

        // put into active mode
        mma_start(MMA_ADDR, 1);
        mma_send_byte(7); // mode
        mma_send_byte(1); // active mode
        mma_stop();

        /*
        // infinite loop to read values
        for (;;) {
            sys_tick_delay_ms(500);

            mma_start(MMA_ADDR, 1);
            mma_send_byte(0);
            mma_restart(MMA_ADDR, 0);
            for (int i = 0; i <= 3; i++) {
                int data;
                if (i == 3) {
                    data = mma_read_nack();
                    printf(" %02x\n", data);
                } else {
                    data = mma_read_ack() & 0x3f;
                    if (data & 0x20) {
                        data |= ~0x1f;
                    }
                    printf(" % 2d", data);
                }
            }
        }
        */
    }

891
892
    // turn boot-up LED off
    led_state(PYB_LED_G1, 0);
893

894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
    // run main script
    {
        vstr_t *vstr = vstr_new();
        vstr_add_str(vstr, "0:/");
        if (pyb_config_source_dir == 0) {
            vstr_add_str(vstr, "src");
        } else {
            vstr_add_str(vstr, qstr_str(pyb_config_source_dir));
        }
        vstr_add_char(vstr, '/');
        if (pyb_config_main == 0) {
            vstr_add_str(vstr, "main.py");
        } else {
            vstr_add_str(vstr, qstr_str(pyb_config_main));
        }
        if (!do_file(vstr_str(vstr))) {
            flash_error(3);
911
        }
912
        vstr_free(vstr);
913
914
    }

Damien's avatar
Damien committed
915
    //printf("init;al=%u\n", m_get_total_bytes_allocated()); // 1600, due to qstr_init
916
    //sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
917
918

    // Python!
919
    if (0) {
Damien's avatar
Damien committed
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
        //const char *pysrc = "def f():\n  x=x+1\nprint(42)\n";
        const char *pysrc =
            // impl01.py
            /*
            "x = 0\n"
            "while x < 400:\n"
            "    y = 0\n"
            "    while y < 400:\n"
            "        z = 0\n"
            "        while z < 400:\n"
            "            z = z + 1\n"
            "        y = y + 1\n"
            "    x = x + 1\n";
            */
            // impl02.py
935
            /*
Damien's avatar
Damien committed
936
937
938
939
940
941
942
943
944
945
946
947
            "#@micropython.native\n"
            "def f():\n"
            "    x = 0\n"
            "    while x < 400:\n"
            "        y = 0\n"
            "        while y < 400:\n"
            "            z = 0\n"
            "            while z < 400:\n"
            "                z = z + 1\n"
            "            y = y + 1\n"
            "        x = x + 1\n"
            "f()\n";
948
            */
949
            /*
Damien's avatar
Damien committed
950
951
952
953
954
955
956
            "print('in python!')\n"
            "x = 0\n"
            "while x < 4:\n"
            "    pyb_led(True)\n"
            "    pyb_delay(201)\n"
            "    pyb_led(False)\n"
            "    pyb_delay(201)\n"
957
            "    x += 1\n"
Damien's avatar
Damien committed
958
959
960
            "print('press me!')\n"
            "while True:\n"
            "    pyb_led(pyb_sw())\n";
961
            */
Damien's avatar
Damien committed
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
            /*
            // impl16.py
            "@micropython.asm_thumb\n"
            "def delay(r0):\n"
            "    b(loop_entry)\n"
            "    label(loop1)\n"
            "    movw(r1, 55999)\n"
            "    label(loop2)\n"
            "    subs(r1, r1, 1)\n"
            "    cmp(r1, 0)\n"
            "    bgt(loop2)\n"
            "    subs(r0, r0, 1)\n"
            "    label(loop_entry)\n"
            "    cmp(r0, 0)\n"
            "    bgt(loop1)\n"
            "print('in python!')\n"
            "@micropython.native\n"
            "def flash(n):\n"
            "    x = 0\n"
            "    while x < n:\n"
            "        pyb_led(True)\n"
            "        delay(249)\n"
            "        pyb_led(False)\n"
            "        delay(249)\n"
            "        x = x + 1\n"
            "flash(20)\n";
            */
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
            // impl18.py
            /*
            "# basic exceptions\n"
            "x = 1\n"
            "try:\n"
            "    x.a()\n"
            "except:\n"
            "    print(x)\n";
            */
            // impl19.py
            "# for loop\n"
            "def f():\n"
            "    for x in range(400):\n"
            "        for y in range(400):\n"
            "            for z in range(400):\n"
            "                pass\n"
            "f()\n";
Damien's avatar
Damien committed
1006

1007
1008
        py_lexer_str_buf_t py_lexer_str_buf;
        py_lexer_t *lex = py_lexer_new_from_str_len("<stdin>", pysrc, strlen(pysrc), false, &py_lexer_str_buf);
Damien's avatar
Damien committed
1009

1010
1011
1012
1013
1014
1015
        // nalloc=1740;6340;6836 -> 140;4600;496 bytes for lexer, parser, compiler
        printf("lex; al=%u\n", m_get_total_bytes_allocated());
        sys_tick_delay_ms(1000);
        py_parse_node_t pn = py_parse(lex, PY_PARSE_FILE_INPUT);
        py_lexer_free(lex);
        if (pn != PY_PARSE_NODE_NULL) {
Damien's avatar
Damien committed
1016
            printf("pars;al=%u\n", m_get_total_bytes_allocated());
1017
            sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
1018
            //parse_node_show(pn, 0);
1019
            bool comp_ok = py_compile(pn, false);
Damien's avatar
Damien committed
1020
            printf("comp;al=%u\n", m_get_total_bytes_allocated());
1021
            sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
1022

1023
1024
1025
            if (!comp_ok) {
                printf("compile error\n");
            } else {
Damien's avatar
Damien committed
1026
1027
1028
1029
                // execute it!

                py_obj_t module_fun = rt_make_function_from_id(1);

1030
                // flash once
1031
                led_state(PYB_LED_G1, 1);
1032
                sys_tick_delay_ms(100);
1033
                led_state(PYB_LED_G1, 0);
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049

                nlr_buf_t nlr;
                if (nlr_push(&nlr) == 0) {
                    py_obj_t ret = rt_call_function_0(module_fun);
                    printf("done! got: ");
                    py_obj_print(ret);
                    printf("\n");
                    nlr_pop();
                } else {
                    // uncaught exception
                    printf("exception: ");
                    py_obj_print((py_obj_t)nlr.ret_val);
                    printf("\n");
                }

                // flash once
1050
                led_state(PYB_LED_G1, 1);
1051
                sys_tick_delay_ms(100);
1052
                led_state(PYB_LED_G1, 0);
Damien's avatar
Damien committed
1053

1054
                sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
1055
                printf("nalloc=%u\n", m_get_total_bytes_allocated());
1056
                sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
1057
1058
1059
1060
            }
        }
    }

1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
    // HID example
    if (0) {
        uint8_t data[4];
        data[0] = 0;
        data[1] = 1;
        data[2] = -2;
        data[3] = 0;
        for (;;) {
            if (sw_get()) {
                data[0] = 0x01; // 0x04 is middle, 0x02 is right
            } else {
                data[0] = 0x00;
            }
            mma_start(MMA_ADDR, 1);
            mma_send_byte(0);
            mma_restart(MMA_ADDR, 0);
            for (int i = 0; i <= 1; i++) {
                int v = mma_read_ack() & 0x3f;
                if (v & 0x20) {
                    v |= ~0x1f;
                }
                data[1 + i] = v;
            }
            mma_read_nack();
            usb_hid_send_report(data);
            sys_tick_delay_ms(15);
        }
    }

1090
1091
    do_repl();

Damien's avatar
Damien committed
1092
1093
    // benchmark C version of impl02.py
    if (0) {
1094
        led_state(PYB_LED_G1, 1);
1095
        sys_tick_delay_ms(100);
1096
        led_state(PYB_LED_G1, 0);
Damien's avatar
Damien committed
1097
        impl02_c_version();
1098
        led_state(PYB_LED_G1, 1);
1099
        sys_tick_delay_ms(100);
1100
        led_state(PYB_LED_G1, 0);
Damien's avatar
Damien committed
1101
1102
1103
    }

    // SD card testing
1104
1105
1106
    if (1) {
        extern void sdio_init(void);
        sdio_init();
Damien's avatar
Damien committed
1107
1108
    }

1109
1110
1111
1112
    printf("PYB: sync filesystems\n");
    pyb_sync();

    printf("PYB: soft reboot\n");
1113
    goto soft_reset;
Damien's avatar
Damien committed
1114
}
1115
1116
1117
1118
1119

double __aeabi_f2d(float x) {
    // TODO
    return 0.0;
}
Damien's avatar
Damien committed
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129

float __aeabi_d2f(double x) {
    // TODO
    return 0.0;
}

double sqrt(double x) {
    // TODO
    return 0.0;
}