adc.c

#include <stdio.h>
#include <stm32f4xx_hal.h>
#include <string.h>

#include "misc.h"
#include "nlr.h"
#include "mpconfig.h"
#include "qstr.h"
#include "obj.h"
#include "adc.h"
#include "pin.h"
#include "build/pins.h"

// Usage Model:
//
// adc = pyb.ADC(pin)
// val = adc.read()
//
// adc = pyb.ADC_all(resolution)
// val = adc.read_channel(channel)
// val = adc.read_core_temp()
// val = adc.read_core_vbat()
// val = adc.read_core_vref()

/* ADC defintions */
#define ADCx                    (ADC1)
#define ADCx_CLK_ENABLE         __ADC1_CLK_ENABLE
#define ADC_NUM_CHANNELS        (19)
#define ADC_NUM_GPIO_CHANNELS   (16)

#if defined(STM32F405xx) || defined(STM32F415xx) || \
    defined(STM32F407xx) || defined(STM32F417xx) || \
    defined(STM32F401xC) || defined(STM32F401xE)
#define VBAT_DIV (2)
#elif defined(STM32F427xx) || defined(STM32F429xx) || \
      defined(STM32F437xx) || defined(STM32F439xx)
#define VBAT_DIV (4)
#endif

/* Core temperature sensor definitions */
#define CORE_TEMP_V25          (943)  /* (0.76v/3.3v)*(2^ADC resoultion) */
#define CORE_TEMP_AVG_SLOPE    (3)    /* (2.5mv/3.3v)*(2^ADC resoultion) */

typedef struct _pyb_obj_adc_t {
    mp_obj_base_t base;
    mp_obj_t pin_name;
    int channel;
    ADC_HandleTypeDef handle;
} pyb_obj_adc_t;

void adc_init_single(pyb_obj_adc_t *adc_obj) {
    if (!IS_ADC_CHANNEL(adc_obj->channel)) {
        return;
    }

    if (adc_obj->channel < ADC_NUM_GPIO_CHANNELS) {
      // Channels 0-16 correspond to real pins. Configure the GPIO pin in
      // ADC mode.
      const pin_obj_t *pin = pin_adc1[adc_obj->channel];
      GPIO_InitTypeDef GPIO_InitStructure;
      GPIO_InitStructure.Pin = pin->pin_mask;
      GPIO_InitStructure.Mode = GPIO_MODE_ANALOG;
      GPIO_InitStructure.Pull = GPIO_NOPULL;
      HAL_GPIO_Init(pin->gpio, &GPIO_InitStructure);
    }

    ADCx_CLK_ENABLE();

    ADC_HandleTypeDef *adcHandle = &adc_obj->handle;
    adcHandle->Instance                   = ADCx;
    adcHandle->Init.ClockPrescaler        = ADC_CLOCKPRESCALER_PCLK_DIV2;
    adcHandle->Init.Resolution            = ADC_RESOLUTION12b;
    adcHandle->Init.ScanConvMode          = DISABLE;
    adcHandle->Init.ContinuousConvMode    = DISABLE;
    adcHandle->Init.DiscontinuousConvMode = DISABLE;
    adcHandle->Init.NbrOfDiscConversion   = 0;
    adcHandle->Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE;
    adcHandle->Init.ExternalTrigConv      = ADC_EXTERNALTRIGCONV_T1_CC1;
    adcHandle->Init.DataAlign             = ADC_DATAALIGN_RIGHT;
    adcHandle->Init.NbrOfConversion       = 1;
    adcHandle->Init.DMAContinuousRequests = DISABLE;
    adcHandle->Init.EOCSelection          = DISABLE;

    HAL_ADC_Init(adcHandle);

    ADC_ChannelConfTypeDef sConfig;

    sConfig.Channel = adc_obj->channel;
    sConfig.Rank = 1;
    sConfig.SamplingTime = ADC_SAMPLETIME_15CYCLES;
    sConfig.Offset = 0;

    HAL_ADC_ConfigChannel(adcHandle, &sConfig);
}

uint32_t adc_read_channel(ADC_HandleTypeDef *adcHandle) {
    uint32_t rawValue = 0;

    HAL_ADC_Start(adcHandle);
    if (HAL_ADC_PollForConversion(adcHandle, 10) == HAL_OK && HAL_ADC_GetState(adcHandle) == HAL_ADC_STATE_EOC_REG) {
        rawValue = HAL_ADC_GetValue(adcHandle);
    }
    HAL_ADC_Stop(adcHandle);

    return rawValue;
}

/******************************************************************************/
/* Micro Python bindings : adc object (single channel)                        */

STATIC void adc_print(void (*print)(void *env, const char *fmt, ...), void *env, mp_obj_t self_in, mp_print_kind_t kind) {
    pyb_obj_adc_t *self = self_in;
    print(env, "<ADC on ");
    mp_obj_print_helper(print, env, self->pin_name, PRINT_STR);
    print(env, " channel=%lu>", self->channel);
}

STATIC mp_obj_t adc_make_new(mp_obj_t type_in, uint n_args, uint n_kw, const mp_obj_t *args) {
    // check number of arguments
    if (!(n_args == 1 && n_kw == 0)) {
        nlr_jump(mp_obj_new_exception_msg(&mp_type_ValueError, "ADC accepts 1 argument"));
    }

    // 1st argument is the pin name
    mp_obj_t pin_obj = args[0];

    uint32_t channel;

    if (MP_OBJ_IS_INT(pin_obj)) {
        channel = mp_obj_get_int(pin_obj);
    } else {
        const pin_obj_t *pin = pin_map_user_obj(pin_obj);
        if ((pin->adc_num & PIN_ADC1) == 0) {
            // No ADC1 function on that pin
            nlr_jump(mp_obj_new_exception_msg_varg(&mp_type_ValueError, "pin %s does not have ADC capabilities", pin->name));
        }
        channel = pin->adc_channel;
    }

    if (!IS_ADC_CHANNEL(channel)) {
        nlr_jump(mp_obj_new_exception_msg_varg(&mp_type_ValueError, "Not a valid ADC Channel: %d", channel));
    }
    if (pin_adc1[channel] == NULL) {
        nlr_jump(mp_obj_new_exception_msg_varg(&mp_type_ValueError, "Channel %d not available on this board", channel));
    }

    pyb_obj_adc_t *o = m_new_obj(pyb_obj_adc_t);
    memset(o, 0, sizeof(*o));
    o->base.type = &pyb_adc_type;
    o->pin_name = pin_obj;
    o->channel = channel;
    adc_init_single(o);

    return o;
}

STATIC mp_obj_t adc_read(mp_obj_t self_in) {
    pyb_obj_adc_t *self = self_in;

    uint32_t data = adc_read_channel(&self->handle);
    return mp_obj_new_int(data);
}

STATIC MP_DEFINE_CONST_FUN_OBJ_1(adc_read_obj, adc_read);

STATIC const mp_method_t adc_methods[] = {
    { MP_QSTR_read, &adc_read_obj},
    { MP_QSTR_NULL, NULL },
};

const mp_obj_type_t pyb_adc_type = {
    { &mp_type_type },
    .name = MP_QSTR_ADC,
    .print = adc_print,
    .make_new = adc_make_new,
    .methods = adc_methods,
};

/******************************************************************************/
/* adc all object                                                             */

typedef struct _pyb_obj_adc_all_t {
    mp_obj_base_t base;
    ADC_HandleTypeDef handle;
} pyb_obj_adc_all_t;

void adc_init_all(pyb_obj_adc_all_t *adc_all, uint32_t resolution) {

    switch (resolution) {
        case 6:  resolution = ADC_RESOLUTION6b;  break;
        case 8:  resolution = ADC_RESOLUTION8b;  break;
        case 10: resolution = ADC_RESOLUTION10b; break;
        case 12: resolution = ADC_RESOLUTION12b; break;
        default:
            nlr_jump(mp_obj_new_exception_msg_varg(&mp_type_ValueError,
                "resolution %d not supported", resolution));
    }

    for (uint32_t channel = 0; channel < ADC_NUM_GPIO_CHANNELS; channel++) {
        // Channels 0-16 correspond to real pins. Configure the GPIO pin in
        // ADC mode.
        const pin_obj_t *pin = pin_adc1[channel];
        GPIO_InitTypeDef GPIO_InitStructure;
        GPIO_InitStructure.Pin = pin->pin_mask;
        GPIO_InitStructure.Mode = GPIO_MODE_ANALOG;
        GPIO_InitStructure.Pull = GPIO_NOPULL;
        HAL_GPIO_Init(pin->gpio, &GPIO_InitStructure);
    }

    ADCx_CLK_ENABLE();

    ADC_HandleTypeDef *adcHandle = &adc_all->handle;
    adcHandle->Instance = ADCx;
    adcHandle->Init.ClockPrescaler        = ADC_CLOCKPRESCALER_PCLK_DIV2;
    adcHandle->Init.Resolution            = resolution;
    adcHandle->Init.ScanConvMode          = DISABLE;
    adcHandle->Init.ContinuousConvMode    = DISABLE;
    adcHandle->Init.DiscontinuousConvMode = DISABLE;
    adcHandle->Init.NbrOfDiscConversion   = 0;
    adcHandle->Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE;
    adcHandle->Init.ExternalTrigConv      = ADC_EXTERNALTRIGCONV_T1_CC1;
    adcHandle->Init.DataAlign             = ADC_DATAALIGN_RIGHT;
    adcHandle->Init.NbrOfConversion       = 1;
    adcHandle->Init.DMAContinuousRequests = DISABLE;
    adcHandle->Init.EOCSelection          = DISABLE;

    HAL_ADC_Init(adcHandle);
}

uint32_t adc_config_and_read_channel(ADC_HandleTypeDef *adcHandle, uint32_t channel) {
    ADC_ChannelConfTypeDef sConfig;
    sConfig.Channel = channel;
    sConfig.Rank = 1;
    sConfig.SamplingTime = ADC_SAMPLETIME_15CYCLES;
    sConfig.Offset = 0;
    HAL_ADC_ConfigChannel(adcHandle, &sConfig);

    return adc_read_channel(adcHandle);
}

int adc_get_resolution(ADC_HandleTypeDef *adcHandle) {
    uint32_t res_reg = __HAL_ADC_GET_RESOLUTION(adcHandle);

    switch (res_reg) {
        case ADC_RESOLUTION6b:  return 6;
        case ADC_RESOLUTION8b:  return 8;
        case ADC_RESOLUTION10b: return 10;
    }
    return 12;
}

int adc_read_core_temp(ADC_HandleTypeDef *adcHandle) {
    int32_t raw_value = adc_config_and_read_channel(adcHandle, ADC_CHANNEL_TEMPSENSOR);

    // Note: constants assume 12-bit resolution, so we scale the raw value to
    //       be 12-bits.
    raw_value <<= (12 - adc_get_resolution(adcHandle));

    return ((raw_value - CORE_TEMP_V25) / CORE_TEMP_AVG_SLOPE) + 25;
}

float adc_read_core_vbat(ADC_HandleTypeDef *adcHandle) {
    uint32_t raw_value = adc_config_and_read_channel(adcHandle, ADC_CHANNEL_VBAT);

    // Note: constants assume 12-bit resolution, so we scale the raw value to
    //       be 12-bits.
    raw_value <<= (12 - adc_get_resolution(adcHandle));

    return raw_value * VBAT_DIV / 4096.0f * 3.3f;
}

float adc_read_core_vref(ADC_HandleTypeDef *adcHandle) {
    uint32_t raw_value = adc_config_and_read_channel(adcHandle, ADC_CHANNEL_VREFINT);

    // Note: constants assume 12-bit resolution, so we scale the raw value to
    //       be 12-bits.
    raw_value <<= (12 - adc_get_resolution(adcHandle));

    return raw_value * VBAT_DIV / 4096.0f * 3.3f;
}

/******************************************************************************/
/* Micro Python bindings : adc_all object                                     */

STATIC void adc_all_print(void (*print)(void *env, const char *fmt, ...), void *env, mp_obj_t self_in, mp_print_kind_t kind) {
    print(env, "<ADC all>");
}

STATIC mp_obj_t adc_all_read_channel(mp_obj_t self_in, mp_obj_t channel) {
    pyb_obj_adc_all_t *self = self_in;

    uint32_t chan = mp_obj_get_int(channel);
    uint32_t data = adc_config_and_read_channel(&self->handle, chan);
    return mp_obj_new_int(data);
}

STATIC mp_obj_t adc_all_read_core_temp(mp_obj_t self_in) {
    pyb_obj_adc_all_t *self = self_in;

    int data  = adc_read_core_temp(&self->handle);
    return mp_obj_new_int(data);
}

STATIC mp_obj_t adc_all_read_core_vbat(mp_obj_t self_in) {
    pyb_obj_adc_all_t *self = self_in;

    float data = adc_read_core_vbat(&self->handle);
    return mp_obj_new_float(data);
}

STATIC mp_obj_t adc_all_read_core_vref(mp_obj_t self_in) {
    pyb_obj_adc_all_t *self = self_in;

    float data  = adc_read_core_vref(&self->handle);
    return mp_obj_new_float(data);
}

STATIC MP_DEFINE_CONST_FUN_OBJ_2(adc_all_read_channel_obj, adc_all_read_channel);
STATIC MP_DEFINE_CONST_FUN_OBJ_1(adc_all_read_core_temp_obj, adc_all_read_core_temp);
STATIC MP_DEFINE_CONST_FUN_OBJ_1(adc_all_read_core_vbat_obj, adc_all_read_core_vbat);
STATIC MP_DEFINE_CONST_FUN_OBJ_1(adc_all_read_core_vref_obj, adc_all_read_core_vref);

STATIC const mp_method_t adc_all_methods[] = {
    { MP_QSTR_read_channel,   &adc_all_read_channel_obj},
    { MP_QSTR_read_core_temp, &adc_all_read_core_temp_obj},
    { MP_QSTR_read_core_vbat, &adc_all_read_core_vbat_obj},
    { MP_QSTR_read_core_vref, &adc_all_read_core_vref_obj},
    { MP_QSTR_NULL, NULL },
};

STATIC const mp_obj_type_t adc_all_type = {
    { &mp_type_type },
    .name = MP_QSTR_ADC,
    .print = adc_all_print,
    .methods = adc_all_methods,
};

STATIC mp_obj_t pyb_ADC_all(mp_obj_t resolution) {
    pyb_obj_adc_all_t *o = m_new_obj(pyb_obj_adc_all_t);
    o->base.type = &adc_all_type;
    adc_init_all(o, mp_obj_get_int(resolution));
    return o;
}

MP_DEFINE_CONST_FUN_OBJ_1(pyb_ADC_all_obj, pyb_ADC_all);