main.c 28.3 KB
Newer Older
1
#include <stdio.h>
Damien's avatar
Damien committed
2
3
#include <stm32f4xx.h>
#include <stm32f4xx_rcc.h>
4
#include <stm32f4xx_gpio.h>
5
#include <stm32f4xx_tim.h>
Damien's avatar
Damien committed
6
#include <stm32f4xx_pwr.h>
7
#include <stm32f4xx_rtc.h>
8
#include <stm_misc.h>
Damien's avatar
Damien committed
9
10
#include "std.h"

11
#include "misc.h"
Damien's avatar
Damien committed
12
13
#include "mpyconfig.h"
#include "gc.h"
14
#include "systick.h"
15
#include "led.h"
16
#include "lcd.h"
17
#include "storage.h"
18
#include "mma.h"
Damien's avatar
Damien committed
19
#include "usb.h"
20
#include "ff.h"
Damien's avatar
Damien committed
21

22
23
static FATFS fatfs0;

Damien's avatar
Damien committed
24
25
extern uint32_t _heap_start;

26
27
28
29
30
31
32
33
34
35
36
37
void flash_error(int n) {
    for (int i = 0; i < n; i++) {
        led_state(PYB_LED_R1, 1);
        led_state(PYB_LED_R2, 0);
        sys_tick_delay_ms(250);
        led_state(PYB_LED_R1, 0);
        led_state(PYB_LED_R2, 1);
        sys_tick_delay_ms(250);
    }
    led_state(PYB_LED_R2, 0);
}

38
static void impl02_c_version(void) {
Damien's avatar
Damien committed
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
    int x = 0;
    while (x < 400) {
        int y = 0;
        while (y < 400) {
            volatile int z = 0;
            while (z < 400) {
                z = z + 1;
            }
            y = y + 1;
        }
        x = x + 1;
    }
}

#define PYB_USRSW_PORT (GPIOA)
54
#define PYB_USRSW_PIN (GPIO_Pin_13)
Damien's avatar
Damien committed
55

56
void sw_init(void) {
Damien's avatar
Damien committed
57
    // make it an input with pull-up
58
59
60
61
62
    GPIO_InitTypeDef GPIO_InitStructure;
    GPIO_InitStructure.GPIO_Pin = PYB_USRSW_PIN;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
    GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
    GPIO_Init(PYB_USRSW_PORT, &GPIO_InitStructure);
Damien's avatar
Damien committed
63
64
}

65
int sw_get(void) {
66
    if (PYB_USRSW_PORT->IDR & PYB_USRSW_PIN) {
Damien's avatar
Damien committed
67
68
69
70
71
72
73
74
75
76
77
78
        // pulled high, so switch is not pressed
        return 0;
    } else {
        // pulled low, so switch is pressed
        return 1;
    }
}

void __fatal_error(const char *msg) {
    lcd_print_strn("\nFATAL ERROR:\n", 14);
    lcd_print_strn(msg, strlen(msg));
    for (;;) {
79
        flash_error(1);
Damien's avatar
Damien committed
80
81
82
    }
}

83
#include "nlr.h"
Damien's avatar
Damien committed
84
85
#include "misc.h"
#include "lexer.h"
86
#include "lexerstm.h"
Damien's avatar
Damien committed
87
88
89
90
#include "mpyconfig.h"
#include "parse.h"
#include "compile.h"
#include "runtime.h"
91
92
#include "repl.h"

93
94
95
static qstr pyb_config_source_dir = 0;
static qstr pyb_config_main = 0;

96
py_obj_t pyb_source_dir(py_obj_t source_dir) {
97
    pyb_config_source_dir = py_get_qstr(source_dir);
98
99
100
101
    return py_const_none;
}

py_obj_t pyb_main(py_obj_t main) {
102
103
104
105
106
    pyb_config_main = py_get_qstr(main);
    return py_const_none;
}

// sync all file systems
107
py_obj_t pyb_sync(void) {
108
    storage_flush();
109
110
    return py_const_none;
}
Damien's avatar
Damien committed
111
112

py_obj_t pyb_delay(py_obj_t count) {
113
    sys_tick_delay_ms(py_get_int(count));
Damien's avatar
Damien committed
114
115
116
117
    return py_const_none;
}

py_obj_t pyb_led(py_obj_t state) {
118
    led_state(PYB_LED_G1, rt_is_true(state));
Damien's avatar
Damien committed
119
120
121
    return state;
}

122
py_obj_t pyb_sw(void) {
Damien's avatar
Damien committed
123
124
125
126
127
128
129
    if (sw_get()) {
        return py_const_true;
    } else {
        return py_const_false;
    }
}

130
/*
131
132
133
134
135
136
void g(uint i) {
    printf("g:%d\n", i);
    if (i & 1) {
        nlr_jump((void*)(42 + i));
    }
}
137
void f(void) {
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
    nlr_buf_t nlr;
    int i;
    for (i = 0; i < 4; i++) {
        printf("f:loop:%d:%p\n", i, &nlr);
        if (nlr_push(&nlr) == 0) {
            // normal
            //printf("a:%p:%p %p %p %u\n", &nlr, nlr.ip, nlr.sp, nlr.prev, nlr.ret_val);
            g(i);
            printf("f:lp:%d:nrm\n", i);
            nlr_pop();
        } else {
            // nlr
            //printf("b:%p:%p %p %p %u\n", &nlr, nlr.ip, nlr.sp, nlr.prev, nlr.ret_val);
            printf("f:lp:%d:nlr:%d\n", i, (int)nlr.ret_val);
        }
    }
}
155
void nlr_test(void) {
156
157
    f(1);
}
158
159
*/

160
void fatality(void) {
161
162
163
164
165
166
    led_state(PYB_LED_R1, 1);
    led_state(PYB_LED_G1, 1);
    led_state(PYB_LED_R2, 1);
    led_state(PYB_LED_G2, 1);
}

167
static const char fresh_boot_py[] =
168
169
170
171
172
173
174
175
176
177
178
179
"# boot.py -- run on boot-up\n"
"# can run arbitrary Python, but best to keep it minimal\n"
"\n"
"pyb.source_dir('/src')\n"
"pyb.main('main.py')\n"
"#pyb.usb_usr('VCP')\n"
"#pyb.usb_msd(True, 'dual partition')\n"
"#pyb.flush_cache(False)\n"
"#pyb.error_log('error.txt')\n"
;

// get lots of info about the board
180
static py_obj_t pyb_info(void) {
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
    // get and print clock speeds
    // SYSCLK=168MHz, HCLK=168MHz, PCLK1=42MHz, PCLK2=84MHz
    {
        RCC_ClocksTypeDef rcc_clocks;
        RCC_GetClocksFreq(&rcc_clocks);
        printf("S=%lu\nH=%lu\nP1=%lu\nP2=%lu\n", rcc_clocks.SYSCLK_Frequency, rcc_clocks.HCLK_Frequency, rcc_clocks.PCLK1_Frequency, rcc_clocks.PCLK2_Frequency);
    }

    // to print info about memory
    {
        extern void *_sidata;
        extern void *_sdata;
        extern void *_edata;
        extern void *_sbss;
        extern void *_ebss;
        extern void *_estack;
        extern void *_etext;
        printf("_sidata=%p\n", &_sidata);
        printf("_sdata=%p\n", &_sdata);
        printf("_edata=%p\n", &_edata);
        printf("_sbss=%p\n", &_sbss);
        printf("_ebss=%p\n", &_ebss);
        printf("_estack=%p\n", &_estack);
        printf("_etext=%p\n", &_etext);
        printf("_heap_start=%p\n", &_heap_start);
    }

208
209
210
211
212
213
214
215
216
217
    // GC info
    {
        gc_info_t info;
        gc_info(&info);
        printf("GC:\n");
        printf("  %lu total\n", info.total);
        printf("  %lu : %lu\n", info.used, info.free);
        printf("  1=%lu 2=%lu m=%lu\n", info.num_1block, info.num_2block, info.max_block);
    }

218
219
220
221
222
    // free space on flash
    {
        DWORD nclst;
        FATFS *fatfs;
        f_getfree("0:", &nclst, &fatfs);
223
        printf("LFS free: %u bytes\n", (uint)(nclst * fatfs->csize * 512));
224
    }
225
226

    return py_const_none;
227
228
}

Damien's avatar
Damien committed
229
230
231
232
233
234
235
236
237
238
239
240
char *strdup(const char *str) {
    uint32_t len = strlen(str);
    char *s2 = m_new(char, len + 1);
    memcpy(s2, str, len);
    s2[len] = 0;
    return s2;
}

#define READLINE_HIST_SIZE (8)

static const char *readline_hist[READLINE_HIST_SIZE] = {NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL};

241
int readline(vstr_t *line, const char *prompt) {
242
    usb_vcp_send_str(prompt);
243
    int len = vstr_len(line);
Damien's avatar
Damien committed
244
245
    int escape = 0;
    int hist_num = 0;
246
    for (;;) {
247
        while (usb_vcp_rx_any() == 0) {
Damien's avatar
Damien committed
248
            sys_tick_delay_ms(1);
249
        }
250
        char c = usb_vcp_rx_get();
Damien's avatar
Damien committed
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
        if (escape == 0) {
            if (c == 4 && vstr_len(line) == len) {
                return 0;
            } else if (c == '\r') {
                usb_vcp_send_str("\r\n");
                for (int i = READLINE_HIST_SIZE - 1; i > 0; i--) {
                    readline_hist[i] = readline_hist[i - 1];
                }
                readline_hist[0] = strdup(vstr_str(line));
                return 1;
            } else if (c == 27) {
                escape = true;
            } else if (c == 127) {
                if (vstr_len(line) > len) {
                    vstr_cut_tail(line, 1);
                    usb_vcp_send_str("\b \b");
                }
            } else if (32 <= c && c <= 126) {
                vstr_add_char(line, c);
                usb_vcp_send_strn(&c, 1);
271
            }
Damien's avatar
Damien committed
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
        } else if (escape == 1) {
            if (c == '[') {
                escape = 2;
            } else {
                escape = 0;
            }
        } else if (escape == 2) {
            escape = 0;
            if (c == 'A') {
                // up arrow
                if (hist_num < READLINE_HIST_SIZE && readline_hist[hist_num] != NULL) {
                    // erase line
                    for (int i = line->len - len; i > 0; i--) {
                        usb_vcp_send_str("\b \b");
                    }
                    // set line to history
                    line->len = len;
                    vstr_add_str(line, readline_hist[hist_num]);
                    // draw line
                    usb_vcp_send_str(readline_hist[hist_num]);
                    // increase hist num
                    hist_num += 1;
                }
            }
        } else {
            escape = 0;
298
        }
Damien's avatar
Damien committed
299
        sys_tick_delay_ms(10);
300
    }
301
302
}

303
void do_repl(void) {
304
305
306
307
308
    usb_vcp_send_str("Micro Python 0.5; STM32F405RG; PYBv2\r\n");
    usb_vcp_send_str("Type \"help\" for more information.\r\n");

    vstr_t line;
    vstr_init(&line);
309
310

    for (;;) {
311
312
313
        vstr_reset(&line);
        int ret = readline(&line, ">>> ");
        if (ret == 0) {
314
            // EOF
315
316
317
318
319
            break;
        }

        if (vstr_len(&line) == 0) {
            continue;
320
        }
321
322

        if (py_repl_is_compound_stmt(vstr_str(&line))) {
323
            for (;;) {
324
325
326
327
328
                vstr_add_char(&line, '\n');
                int len = vstr_len(&line);
                int ret = readline(&line, "... ");
                if (ret == 0 || vstr_len(&line) == len) {
                    // done entering compound statement
329
330
331
332
333
334
                    break;
                }
            }
        }

        py_lexer_str_buf_t sb;
335
        py_lexer_t *lex = py_lexer_new_from_str_len("<stdin>", vstr_str(&line), vstr_len(&line), false, &sb);
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
        py_parse_node_t pn = py_parse(lex, PY_PARSE_SINGLE_INPUT);
        py_lexer_free(lex);

        if (pn != PY_PARSE_NODE_NULL) {
            bool comp_ok = py_compile(pn, true);
            if (comp_ok) {
                py_obj_t module_fun = rt_make_function_from_id(1);
                if (module_fun != py_const_none) {
                    nlr_buf_t nlr;
                    if (nlr_push(&nlr) == 0) {
                        rt_call_function_0(module_fun);
                        nlr_pop();
                    } else {
                        // uncaught exception
                        py_obj_print((py_obj_t)nlr.ret_val);
                        printf("\n");
                    }
                }
            }
        }
    }
357

358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
    usb_vcp_send_str("\r\n");
}

bool do_file(const char *filename) {
    py_lexer_file_buf_t fb;
    py_lexer_t *lex = py_lexer_new_from_file(filename, &fb);

    if (lex == NULL) {
        printf("could not open file '%s' for reading\n", filename);
        return false;
    }

    py_parse_node_t pn = py_parse(lex, PY_PARSE_FILE_INPUT);
    py_lexer_free(lex);

    if (pn == PY_PARSE_NODE_NULL) {
        return false;
    }

    bool comp_ok = py_compile(pn, false);
    if (!comp_ok) {
        return false;
    }

    py_obj_t module_fun = rt_make_function_from_id(1);
    if (module_fun == py_const_none) {
        return false;
    }

    nlr_buf_t nlr;
    if (nlr_push(&nlr) == 0) {
        rt_call_function_0(module_fun);
        nlr_pop();
        return true;
    } else {
        // uncaught exception
        py_obj_print((py_obj_t)nlr.ret_val);
        printf("\n");
        return false;
    }
398
399
}

400
401
402
403
404
405
#define RAM_START (0x20000000) // fixed for chip
#define HEAP_END  (0x2001c000) // tunable
#define RAM_END   (0x20020000) // fixed for chip

void gc_helper_get_regs_and_clean_stack(machine_uint_t *regs, machine_uint_t heap_end);

406
void gc_collect(void) {
407
    uint32_t start = sys_tick_counter;
Damien's avatar
Damien committed
408
    gc_collect_start();
409
410
411
412
    gc_collect_root((void**)RAM_START, (((uint32_t)&_heap_start) - RAM_START) / 4);
    machine_uint_t regs[10];
    gc_helper_get_regs_and_clean_stack(regs, HEAP_END);
    gc_collect_root((void**)HEAP_END, (RAM_END - HEAP_END) / 4); // will trace regs since they now live in this function on the stack
Damien's avatar
Damien committed
413
    gc_collect_end();
414
415
416
417
418
419
420
421
422
    uint32_t ticks = sys_tick_counter - start; // TODO implement a function that does this properly
    gc_info_t info;
    gc_info(&info);
    printf("GC@%lu %lums\n", start, ticks);
    printf(" %lu total\n", info.total);
    printf(" %lu : %lu\n", info.used, info.free);
    printf(" 1=%lu 2=%lu m=%lu\n", info.num_1block, info.num_2block, info.max_block);
}

423
py_obj_t pyb_gc(void) {
424
425
    gc_collect();
    return py_const_none;
Damien's avatar
Damien committed
426
427
}

428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
// PWM
// TIM2 and TIM5 have CH1, CH2, CH3, CH4 on PA0-PA3 respectively
// they are both 32-bit counters
// 16-bit prescaler
// TIM2_CH3 also on PB10 (used below)
void servo_init(void) {
    // TIM2 clock enable
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);

    // GPIOC Configuration: TIM2_CH3 (PB10)
    GPIO_InitTypeDef GPIO_InitStructure;
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
    GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
    GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
    GPIO_Init(GPIOB, &GPIO_InitStructure);

    // Connect TIM2 pins to AF1
    GPIO_PinAFConfig(GPIOB, GPIO_PinSource10, GPIO_AF_TIM2);

    // Compute the prescaler value so TIM2 runs at 100kHz
    uint16_t PrescalerValue = (uint16_t) ((SystemCoreClock / 2) / 100000) - 1;

    // Time base configuration
    TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
    TIM_TimeBaseStructure.TIM_Period = 2000; // timer cycles at 50Hz
    TIM_TimeBaseStructure.TIM_Prescaler = PrescalerValue;
    TIM_TimeBaseStructure.TIM_ClockDivision = 0;
    TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
    TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);

    // PWM1 Mode configuration: Channel1
    TIM_OCInitTypeDef TIM_OCInitStructure;
    TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;
    TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
    TIM_OCInitStructure.TIM_Pulse = 150; // units of 10us
    TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High;
    TIM_OC3Init(TIM2, &TIM_OCInitStructure);

    // ?
    TIM_OC3PreloadConfig(TIM2, TIM_OCPreload_Enable);

    // ?
    TIM_ARRPreloadConfig(TIM2, ENABLE);

    // TIM2 enable counter
    TIM_Cmd(TIM2, ENABLE);
}

py_obj_t pyb_servo_set(py_obj_t value) {
    int v = py_get_int(value);
    if (v < 100) { v = 100; }
    if (v > 200) { v = 200; }
    TIM2->CCR3 = v;
    return py_const_none;
}

Damien's avatar
Damien committed
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
#define MMA_ADDR (0x4c)

py_obj_t pyb_mma_read() {
    mma_start(MMA_ADDR, 1);
    mma_send_byte(0);
    mma_restart(MMA_ADDR, 0);
    py_obj_t data[4];
    for (int i = 3; i >= 1; i--) {
        int v = mma_read_ack() & 0x3f;
        if (v & 0x20) {
            v |= ~0x1f;
        }
        data[i] = py_obj_new_int(v);
    }
    data[0] = py_obj_new_int(mma_read_nack());
    return rt_build_tuple(4, data); // items in reverse order in data
}

504
505
506
507
508
509
510
511
512
513
514
py_obj_t pyb_hid_send_report(py_obj_t arg) {
    py_obj_t *items = py_get_array_fixed_n(arg, 4);
    uint8_t data[4];
    data[0] = py_get_int(items[0]);
    data[1] = py_get_int(items[1]);
    data[2] = py_get_int(items[2]);
    data[3] = py_get_int(items[3]);
    usb_hid_send_report(data);
    return py_const_none;
}

515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
static void rtc_init(void) {
    /* Enable the PWR clock */
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);

    /* Allow access to RTC */
    PWR_BackupAccessCmd(ENABLE);

    /* Enable the LSE OSC */
    RCC_LSEConfig(RCC_LSE_ON);

    /* Wait till LSE is ready */
    while(RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET) {
    }

    /* Select the RTC Clock Source */
    RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);
    /* ck_spre(1Hz) = RTCCLK(LSE) /(uwAsynchPrediv + 1)*(uwSynchPrediv + 1)*/
    uint32_t uwSynchPrediv = 0xFF;
    uint32_t uwAsynchPrediv = 0x7F;

    /* Enable the RTC Clock */
    RCC_RTCCLKCmd(ENABLE);

    /* Wait for RTC APB registers synchronisation */
    RTC_WaitForSynchro();

    /* Configure the RTC data register and RTC prescaler */
    RTC_InitTypeDef RTC_InitStructure;
    RTC_InitStructure.RTC_AsynchPrediv = uwAsynchPrediv;
    RTC_InitStructure.RTC_SynchPrediv = uwSynchPrediv;
    RTC_InitStructure.RTC_HourFormat = RTC_HourFormat_24;
    RTC_Init(&RTC_InitStructure);

    // Set the date (BCD)
    RTC_DateTypeDef RTC_DateStructure;
    RTC_DateStructure.RTC_Year = 0x13;
    RTC_DateStructure.RTC_Month = RTC_Month_October;
    RTC_DateStructure.RTC_Date = 0x26;
    RTC_DateStructure.RTC_WeekDay = RTC_Weekday_Saturday;
    RTC_SetDate(RTC_Format_BCD, &RTC_DateStructure);

    // Set the time (BCD)
    RTC_TimeTypeDef RTC_TimeStructure;
    RTC_TimeStructure.RTC_H12     = RTC_H12_AM;
    RTC_TimeStructure.RTC_Hours   = 0x01;
    RTC_TimeStructure.RTC_Minutes = 0x53;
    RTC_TimeStructure.RTC_Seconds = 0x00;
    RTC_SetTime(RTC_Format_BCD, &RTC_TimeStructure);

    // Indicator for the RTC configuration
    //RTC_WriteBackupRegister(RTC_BKP_DR0, 0x32F2);
}

py_obj_t pyb_rtc_read(void) {
    RTC_TimeTypeDef RTC_TimeStructure;
    RTC_GetTime(RTC_Format_BIN, &RTC_TimeStructure);
    printf("%02d:%02d:%02d\n", RTC_TimeStructure.RTC_Hours, RTC_TimeStructure.RTC_Minutes, RTC_TimeStructure.RTC_Seconds);
    return py_const_none;
}

575
int main(void) {
576
    // TODO disable JTAG
Damien's avatar
Damien committed
577

578
579
580
581
582
583
    // set interrupt priority config to use all 4 bits for pre-empting
    NVIC_PriorityGroupConfig(NVIC_PriorityGroup_4);

    // enable the CCM RAM and the GPIO's
    RCC->AHB1ENR |= RCC_AHB1ENR_CCMDATARAMEN | RCC_AHB1ENR_GPIOAEN | RCC_AHB1ENR_GPIOBEN | RCC_AHB1ENR_GPIOCEN;

584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
    // configure SDIO pins to be high to start with (doesn't seem to fix problem...)
    {
      GPIO_InitTypeDef GPIO_InitStructure;
      GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | GPIO_Pin_11 | GPIO_Pin_12;
      GPIO_InitStructure.GPIO_Speed = GPIO_Speed_25MHz;
      GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
      GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
      GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
      GPIO_Init(GPIOC, &GPIO_InitStructure);

      // Configure PD.02 CMD line
      GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
      GPIO_Init(GPIOD, &GPIO_InitStructure);
    }

599
600
    // basic sub-system init
    sys_tick_init();
Damien's avatar
Damien committed
601
    led_init();
602
    rtc_init();
603
604
605
606
607

    // turn on LED to indicate bootup
    led_state(PYB_LED_G1, 1);

    // more sub-system init
Damien's avatar
Damien committed
608
    sw_init();
609
    storage_init();
Damien's avatar
Damien committed
610

611
612
613
614
615
soft_reset:

    // LCD init
    lcd_init();

Damien's avatar
Damien committed
616
    // GC init
617
    gc_init(&_heap_start, (void*)HEAP_END);
Damien's avatar
Damien committed
618

619
    // Micro Python init
620
621
    qstr_init();
    rt_init();
622

623
624
625
    // servo
    servo_init();

626
    // add some functions to the python namespace
627
628
629
630
631
    {
        py_obj_t m = py_module_new();
        rt_store_attr(m, qstr_from_str_static("info"), rt_make_function_0(pyb_info));
        rt_store_attr(m, qstr_from_str_static("source_dir"), rt_make_function_1(pyb_source_dir));
        rt_store_attr(m, qstr_from_str_static("main"), rt_make_function_1(pyb_main));
632
        rt_store_attr(m, qstr_from_str_static("sync"), rt_make_function_0(pyb_sync));
633
634
635
636
        rt_store_attr(m, qstr_from_str_static("gc"), rt_make_function_0(pyb_gc));
        rt_store_attr(m, qstr_from_str_static("delay"), rt_make_function_1(pyb_delay));
        rt_store_attr(m, qstr_from_str_static("led"), rt_make_function_1(pyb_led));
        rt_store_attr(m, qstr_from_str_static("sw"), rt_make_function_0(pyb_sw));
637
        rt_store_attr(m, qstr_from_str_static("servo"), rt_make_function_1(pyb_servo_set));
Damien's avatar
Damien committed
638
        rt_store_attr(m, qstr_from_str_static("mma"), rt_make_function_0(pyb_mma_read));
639
        rt_store_attr(m, qstr_from_str_static("hid"), rt_make_function_1(pyb_hid_send_report));
640
        rt_store_attr(m, qstr_from_str_static("time"), rt_make_function_0(pyb_rtc_read));
641
642
        rt_store_name(qstr_from_str_static("pyb"), m);
    }
643

644
645
    // print a message to the LCD
    lcd_print_str(" micro py board\n");
Damien's avatar
Damien committed
646

647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
    // local filesystem init
    {
        // try to mount the flash
        FRESULT res = f_mount(&fatfs0, "0:", 1);
        if (res == FR_OK) {
            // mount sucessful
        } else if (res == FR_NO_FILESYSTEM) {
            // no filesystem, so create a fresh one

            // LED on to indicate creation of LFS
            led_state(PYB_LED_R2, 1);
            uint32_t stc = sys_tick_counter;

            res = f_mkfs("0:", 0, 0);
            if (res == FR_OK) {
                // success creating fresh LFS
            } else {
                __fatal_error("could not create LFS");
            }

667
668
            // keep LED on for at least 200ms
            sys_tick_wait_at_least(stc, 200);
669
670
671
672
            led_state(PYB_LED_R2, 0);
        } else {
            __fatal_error("could not access LFS");
        }
Damien's avatar
Damien committed
673
674
    }

675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
    // make sure we have a /boot.py
    {
        FILINFO fno;
        FRESULT res = f_stat("0:/boot.py", &fno);
        if (res == FR_OK) {
            if (fno.fattrib & AM_DIR) {
                // exists as a directory
                // TODO handle this case
                // see http://elm-chan.org/fsw/ff/img/app2.c for a "rm -rf" implementation
            } else {
                // exists as a file, good!
            }
        } else {
            // doesn't exist, create fresh file

            // LED on to indicate creation of boot.py
            led_state(PYB_LED_R2, 1);
            uint32_t stc = sys_tick_counter;

            FIL fp;
            f_open(&fp, "0:/boot.py", FA_WRITE | FA_CREATE_ALWAYS);
            UINT n;
697
            f_write(&fp, fresh_boot_py, sizeof(fresh_boot_py) - 1 /* don't count null terminator */, &n);
698
699
700
            // TODO check we could write n bytes
            f_close(&fp);

701
702
            // keep LED on for at least 200ms
            sys_tick_wait_at_least(stc, 200);
703
704
705
706
            led_state(PYB_LED_R2, 0);
        }
    }

707
708
709
710
711
    // run /boot.py
    if (!do_file("0:/boot.py")) {
        flash_error(4);
    }

712
713
714
    // USB
    usb_init();

Damien's avatar
Damien committed
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
    // MMA
    {
        // init and reset address to zero
        mma_init();
        mma_start(MMA_ADDR, 1);
        mma_send_byte(0);
        mma_stop();

        /*
        // read and print all 11 registers
        mma_start(MMA_ADDR, 1);
        mma_send_byte(0);
        mma_restart(MMA_ADDR, 0);
        for (int i = 0; i <= 0xa; i++) {
            int data;
            if (i == 0xa) {
                data = mma_read_nack();
            } else {
                data = mma_read_ack();
            }
            printf(" %02x", data);
        }
        printf("\n");
        */

        // put into active mode
        mma_start(MMA_ADDR, 1);
        mma_send_byte(7); // mode
        mma_send_byte(1); // active mode
        mma_stop();

        /*
        // infinite loop to read values
        for (;;) {
            sys_tick_delay_ms(500);

            mma_start(MMA_ADDR, 1);
            mma_send_byte(0);
            mma_restart(MMA_ADDR, 0);
            for (int i = 0; i <= 3; i++) {
                int data;
                if (i == 3) {
                    data = mma_read_nack();
                    printf(" %02x\n", data);
                } else {
                    data = mma_read_ack() & 0x3f;
                    if (data & 0x20) {
                        data |= ~0x1f;
                    }
                    printf(" % 2d", data);
                }
            }
        }
        */
    }

771
772
    // turn boot-up LED off
    led_state(PYB_LED_G1, 0);
773

774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
    // run main script
    {
        vstr_t *vstr = vstr_new();
        vstr_add_str(vstr, "0:/");
        if (pyb_config_source_dir == 0) {
            vstr_add_str(vstr, "src");
        } else {
            vstr_add_str(vstr, qstr_str(pyb_config_source_dir));
        }
        vstr_add_char(vstr, '/');
        if (pyb_config_main == 0) {
            vstr_add_str(vstr, "main.py");
        } else {
            vstr_add_str(vstr, qstr_str(pyb_config_main));
        }
        if (!do_file(vstr_str(vstr))) {
            flash_error(3);
791
        }
792
        vstr_free(vstr);
793
794
    }

Damien's avatar
Damien committed
795
    //printf("init;al=%u\n", m_get_total_bytes_allocated()); // 1600, due to qstr_init
796
    //sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
797
798

    // Python!
799
    if (0) {
Damien's avatar
Damien committed
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
        //const char *pysrc = "def f():\n  x=x+1\nprint(42)\n";
        const char *pysrc =
            // impl01.py
            /*
            "x = 0\n"
            "while x < 400:\n"
            "    y = 0\n"
            "    while y < 400:\n"
            "        z = 0\n"
            "        while z < 400:\n"
            "            z = z + 1\n"
            "        y = y + 1\n"
            "    x = x + 1\n";
            */
            // impl02.py
815
            /*
Damien's avatar
Damien committed
816
817
818
819
820
821
822
823
824
825
826
827
            "#@micropython.native\n"
            "def f():\n"
            "    x = 0\n"
            "    while x < 400:\n"
            "        y = 0\n"
            "        while y < 400:\n"
            "            z = 0\n"
            "            while z < 400:\n"
            "                z = z + 1\n"
            "            y = y + 1\n"
            "        x = x + 1\n"
            "f()\n";
828
            */
829
            /*
Damien's avatar
Damien committed
830
831
832
833
834
835
836
            "print('in python!')\n"
            "x = 0\n"
            "while x < 4:\n"
            "    pyb_led(True)\n"
            "    pyb_delay(201)\n"
            "    pyb_led(False)\n"
            "    pyb_delay(201)\n"
837
            "    x += 1\n"
Damien's avatar
Damien committed
838
839
840
            "print('press me!')\n"
            "while True:\n"
            "    pyb_led(pyb_sw())\n";
841
            */
Damien's avatar
Damien committed
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
            /*
            // impl16.py
            "@micropython.asm_thumb\n"
            "def delay(r0):\n"
            "    b(loop_entry)\n"
            "    label(loop1)\n"
            "    movw(r1, 55999)\n"
            "    label(loop2)\n"
            "    subs(r1, r1, 1)\n"
            "    cmp(r1, 0)\n"
            "    bgt(loop2)\n"
            "    subs(r0, r0, 1)\n"
            "    label(loop_entry)\n"
            "    cmp(r0, 0)\n"
            "    bgt(loop1)\n"
            "print('in python!')\n"
            "@micropython.native\n"
            "def flash(n):\n"
            "    x = 0\n"
            "    while x < n:\n"
            "        pyb_led(True)\n"
            "        delay(249)\n"
            "        pyb_led(False)\n"
            "        delay(249)\n"
            "        x = x + 1\n"
            "flash(20)\n";
            */
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
            // impl18.py
            /*
            "# basic exceptions\n"
            "x = 1\n"
            "try:\n"
            "    x.a()\n"
            "except:\n"
            "    print(x)\n";
            */
            // impl19.py
            "# for loop\n"
            "def f():\n"
            "    for x in range(400):\n"
            "        for y in range(400):\n"
            "            for z in range(400):\n"
            "                pass\n"
            "f()\n";
Damien's avatar
Damien committed
886

887
888
        py_lexer_str_buf_t py_lexer_str_buf;
        py_lexer_t *lex = py_lexer_new_from_str_len("<stdin>", pysrc, strlen(pysrc), false, &py_lexer_str_buf);
Damien's avatar
Damien committed
889

890
891
892
893
894
895
        // nalloc=1740;6340;6836 -> 140;4600;496 bytes for lexer, parser, compiler
        printf("lex; al=%u\n", m_get_total_bytes_allocated());
        sys_tick_delay_ms(1000);
        py_parse_node_t pn = py_parse(lex, PY_PARSE_FILE_INPUT);
        py_lexer_free(lex);
        if (pn != PY_PARSE_NODE_NULL) {
Damien's avatar
Damien committed
896
            printf("pars;al=%u\n", m_get_total_bytes_allocated());
897
            sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
898
            //parse_node_show(pn, 0);
899
            bool comp_ok = py_compile(pn, false);
Damien's avatar
Damien committed
900
            printf("comp;al=%u\n", m_get_total_bytes_allocated());
901
            sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
902

903
904
905
            if (!comp_ok) {
                printf("compile error\n");
            } else {
Damien's avatar
Damien committed
906
907
908
909
                // execute it!

                py_obj_t module_fun = rt_make_function_from_id(1);

910
                // flash once
911
                led_state(PYB_LED_G1, 1);
912
                sys_tick_delay_ms(100);
913
                led_state(PYB_LED_G1, 0);
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929

                nlr_buf_t nlr;
                if (nlr_push(&nlr) == 0) {
                    py_obj_t ret = rt_call_function_0(module_fun);
                    printf("done! got: ");
                    py_obj_print(ret);
                    printf("\n");
                    nlr_pop();
                } else {
                    // uncaught exception
                    printf("exception: ");
                    py_obj_print((py_obj_t)nlr.ret_val);
                    printf("\n");
                }

                // flash once
930
                led_state(PYB_LED_G1, 1);
931
                sys_tick_delay_ms(100);
932
                led_state(PYB_LED_G1, 0);
Damien's avatar
Damien committed
933

934
                sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
935
                printf("nalloc=%u\n", m_get_total_bytes_allocated());
936
                sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
937
938
939
940
            }
        }
    }

941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
    // HID example
    if (0) {
        uint8_t data[4];
        data[0] = 0;
        data[1] = 1;
        data[2] = -2;
        data[3] = 0;
        for (;;) {
            if (sw_get()) {
                data[0] = 0x01; // 0x04 is middle, 0x02 is right
            } else {
                data[0] = 0x00;
            }
            mma_start(MMA_ADDR, 1);
            mma_send_byte(0);
            mma_restart(MMA_ADDR, 0);
            for (int i = 0; i <= 1; i++) {
                int v = mma_read_ack() & 0x3f;
                if (v & 0x20) {
                    v |= ~0x1f;
                }
                data[1 + i] = v;
            }
            mma_read_nack();
            usb_hid_send_report(data);
            sys_tick_delay_ms(15);
        }
    }

970
971
    do_repl();

Damien's avatar
Damien committed
972
973
    // benchmark C version of impl02.py
    if (0) {
974
        led_state(PYB_LED_G1, 1);
975
        sys_tick_delay_ms(100);
976
        led_state(PYB_LED_G1, 0);
Damien's avatar
Damien committed
977
        impl02_c_version();
978
        led_state(PYB_LED_G1, 1);
979
        sys_tick_delay_ms(100);
980
        led_state(PYB_LED_G1, 0);
Damien's avatar
Damien committed
981
982
983
    }

    // SD card testing
984
985
986
    if (1) {
        extern void sdio_init(void);
        sdio_init();
Damien's avatar
Damien committed
987
988
    }

989
990
991
992
    printf("PYB: sync filesystems\n");
    pyb_sync();

    printf("PYB: soft reboot\n");
993
    goto soft_reset;
Damien's avatar
Damien committed
994
}