main.c 34.8 KB
Newer Older
1
#include <stdio.h>
Damien's avatar
Damien committed
2
3
#include <stm32f4xx.h>
#include <stm32f4xx_rcc.h>
4
#include <stm32f4xx_gpio.h>
5
#include <stm32f4xx_tim.h>
Damien's avatar
Damien committed
6
#include <stm32f4xx_pwr.h>
7
#include <stm32f4xx_rtc.h>
8
#include <stm32f4xx_usart.h>
9
#include <stm32f4xx_rng.h>
10
#include <stm_misc.h>
Damien's avatar
Damien committed
11
12
#include "std.h"

13
#include "misc.h"
Damien's avatar
Damien committed
14
15
#include "mpyconfig.h"
#include "gc.h"
16
#include "systick.h"
17
#include "led.h"
18
#include "lcd.h"
19
#include "storage.h"
20
#include "mma.h"
21
#include "usart.h"
Damien's avatar
Damien committed
22
#include "usb.h"
23
#include "ff.h"
24
#include "timer.h"
25
#include "audio.h"
Damien's avatar
Damien committed
26

Damien's avatar
Damien committed
27
28
extern uint32_t _heap_start;

29
30
static FATFS fatfs0;

31
32
33
34
35
36
37
38
39
40
41
42
void flash_error(int n) {
    for (int i = 0; i < n; i++) {
        led_state(PYB_LED_R1, 1);
        led_state(PYB_LED_R2, 0);
        sys_tick_delay_ms(250);
        led_state(PYB_LED_R1, 0);
        led_state(PYB_LED_R2, 1);
        sys_tick_delay_ms(250);
    }
    led_state(PYB_LED_R2, 0);
}

43
static void impl02_c_version(void) {
Damien's avatar
Damien committed
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
    int x = 0;
    while (x < 400) {
        int y = 0;
        while (y < 400) {
            volatile int z = 0;
            while (z < 400) {
                z = z + 1;
            }
            y = y + 1;
        }
        x = x + 1;
    }
}

#define PYB_USRSW_PORT (GPIOA)
59
#define PYB_USRSW_PIN (GPIO_Pin_13)
Damien's avatar
Damien committed
60

61
void sw_init(void) {
Damien's avatar
Damien committed
62
    // make it an input with pull-up
63
64
65
66
67
    GPIO_InitTypeDef GPIO_InitStructure;
    GPIO_InitStructure.GPIO_Pin = PYB_USRSW_PIN;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
    GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
    GPIO_Init(PYB_USRSW_PORT, &GPIO_InitStructure);
Damien's avatar
Damien committed
68
69
}

70
int sw_get(void) {
71
    if (PYB_USRSW_PORT->IDR & PYB_USRSW_PIN) {
Damien's avatar
Damien committed
72
73
74
75
76
77
78
79
80
81
82
83
        // pulled high, so switch is not pressed
        return 0;
    } else {
        // pulled low, so switch is pressed
        return 1;
    }
}

void __fatal_error(const char *msg) {
    lcd_print_strn("\nFATAL ERROR:\n", 14);
    lcd_print_strn(msg, strlen(msg));
    for (;;) {
84
        flash_error(1);
Damien's avatar
Damien committed
85
86
87
    }
}

88
#include "nlr.h"
Damien's avatar
Damien committed
89
90
#include "misc.h"
#include "lexer.h"
91
#include "lexerstm.h"
Damien's avatar
Damien committed
92
93
94
95
#include "mpyconfig.h"
#include "parse.h"
#include "compile.h"
#include "runtime.h"
96
97
#include "repl.h"

98
99
100
static qstr pyb_config_source_dir = 0;
static qstr pyb_config_main = 0;

101
py_obj_t pyb_source_dir(py_obj_t source_dir) {
Damien's avatar
Damien committed
102
    pyb_config_source_dir = py_obj_get_qstr(source_dir);
103
104
105
106
    return py_const_none;
}

py_obj_t pyb_main(py_obj_t main) {
Damien's avatar
Damien committed
107
    pyb_config_main = py_obj_get_qstr(main);
108
109
110
111
    return py_const_none;
}

// sync all file systems
112
py_obj_t pyb_sync(void) {
113
    storage_flush();
114
115
    return py_const_none;
}
Damien's avatar
Damien committed
116
117

py_obj_t pyb_delay(py_obj_t count) {
Damien's avatar
Damien committed
118
    sys_tick_delay_ms(py_obj_get_int(count));
Damien's avatar
Damien committed
119
120
121
122
    return py_const_none;
}

py_obj_t pyb_led(py_obj_t state) {
123
    led_state(PYB_LED_G1, rt_is_true(state));
Damien's avatar
Damien committed
124
125
126
    return state;
}

127
py_obj_t pyb_sw(void) {
Damien's avatar
Damien committed
128
129
130
131
132
133
134
    if (sw_get()) {
        return py_const_true;
    } else {
        return py_const_false;
    }
}

135
/*
136
137
138
139
140
141
void g(uint i) {
    printf("g:%d\n", i);
    if (i & 1) {
        nlr_jump((void*)(42 + i));
    }
}
142
void f(void) {
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
    nlr_buf_t nlr;
    int i;
    for (i = 0; i < 4; i++) {
        printf("f:loop:%d:%p\n", i, &nlr);
        if (nlr_push(&nlr) == 0) {
            // normal
            //printf("a:%p:%p %p %p %u\n", &nlr, nlr.ip, nlr.sp, nlr.prev, nlr.ret_val);
            g(i);
            printf("f:lp:%d:nrm\n", i);
            nlr_pop();
        } else {
            // nlr
            //printf("b:%p:%p %p %p %u\n", &nlr, nlr.ip, nlr.sp, nlr.prev, nlr.ret_val);
            printf("f:lp:%d:nlr:%d\n", i, (int)nlr.ret_val);
        }
    }
}
160
void nlr_test(void) {
161
162
    f(1);
}
163
164
*/

165
void fatality(void) {
166
167
168
169
170
171
    led_state(PYB_LED_R1, 1);
    led_state(PYB_LED_G1, 1);
    led_state(PYB_LED_R2, 1);
    led_state(PYB_LED_G2, 1);
}

172
static const char fresh_boot_py[] =
173
174
175
176
177
178
179
180
181
182
183
184
"# boot.py -- run on boot-up\n"
"# can run arbitrary Python, but best to keep it minimal\n"
"\n"
"pyb.source_dir('/src')\n"
"pyb.main('main.py')\n"
"#pyb.usb_usr('VCP')\n"
"#pyb.usb_msd(True, 'dual partition')\n"
"#pyb.flush_cache(False)\n"
"#pyb.error_log('error.txt')\n"
;

// get lots of info about the board
185
static py_obj_t pyb_info(void) {
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
    // get and print clock speeds
    // SYSCLK=168MHz, HCLK=168MHz, PCLK1=42MHz, PCLK2=84MHz
    {
        RCC_ClocksTypeDef rcc_clocks;
        RCC_GetClocksFreq(&rcc_clocks);
        printf("S=%lu\nH=%lu\nP1=%lu\nP2=%lu\n", rcc_clocks.SYSCLK_Frequency, rcc_clocks.HCLK_Frequency, rcc_clocks.PCLK1_Frequency, rcc_clocks.PCLK2_Frequency);
    }

    // to print info about memory
    {
        extern void *_sidata;
        extern void *_sdata;
        extern void *_edata;
        extern void *_sbss;
        extern void *_ebss;
        extern void *_estack;
        extern void *_etext;
        printf("_sidata=%p\n", &_sidata);
        printf("_sdata=%p\n", &_sdata);
        printf("_edata=%p\n", &_edata);
        printf("_sbss=%p\n", &_sbss);
        printf("_ebss=%p\n", &_ebss);
        printf("_estack=%p\n", &_estack);
        printf("_etext=%p\n", &_etext);
        printf("_heap_start=%p\n", &_heap_start);
    }

213
214
215
216
217
218
219
220
221
222
    // GC info
    {
        gc_info_t info;
        gc_info(&info);
        printf("GC:\n");
        printf("  %lu total\n", info.total);
        printf("  %lu : %lu\n", info.used, info.free);
        printf("  1=%lu 2=%lu m=%lu\n", info.num_1block, info.num_2block, info.max_block);
    }

223
224
225
226
227
    // free space on flash
    {
        DWORD nclst;
        FATFS *fatfs;
        f_getfree("0:", &nclst, &fatfs);
228
        printf("LFS free: %u bytes\n", (uint)(nclst * fatfs->csize * 512));
229
    }
230
231

    return py_const_none;
232
233
}

234
py_obj_t pyb_usart_send(py_obj_t data) {
Damien's avatar
Damien committed
235
    usart_tx_char(py_obj_get_int(data));
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
    return py_const_none;
}

py_obj_t pyb_usart_receive(void) {
    return py_obj_new_int(usart_rx_char());
}

py_obj_t pyb_usart_status(void) {
    if (usart_rx_any()) {
        return py_const_true;
    } else {
        return py_const_false;
    }
}

Damien's avatar
Damien committed
251
252
253
254
255
256
257
258
259
260
261
262
char *strdup(const char *str) {
    uint32_t len = strlen(str);
    char *s2 = m_new(char, len + 1);
    memcpy(s2, str, len);
    s2[len] = 0;
    return s2;
}

#define READLINE_HIST_SIZE (8)

static const char *readline_hist[READLINE_HIST_SIZE] = {NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL};

263
264
265
266
267
void stdout_tx_str(const char *str) {
    usart_tx_str(str);
    usb_vcp_send_str(str);
}

268
int readline(vstr_t *line, const char *prompt) {
269
    stdout_tx_str(prompt);
270
    int len = vstr_len(line);
Damien's avatar
Damien committed
271
272
    int escape = 0;
    int hist_num = 0;
273
    for (;;) {
274
275
276
277
278
279
280
281
282
        char c;
        for (;;) {
            if (usb_vcp_rx_any() != 0) {
                c = usb_vcp_rx_get();
                break;
            } else if (usart_rx_any()) {
                c = usart_rx_char();
                break;
            }
Damien's avatar
Damien committed
283
            sys_tick_delay_ms(1);
284
        }
Damien's avatar
Damien committed
285
286
287
288
        if (escape == 0) {
            if (c == 4 && vstr_len(line) == len) {
                return 0;
            } else if (c == '\r') {
289
                stdout_tx_str("\r\n");
Damien's avatar
Damien committed
290
291
292
293
294
295
296
297
298
299
                for (int i = READLINE_HIST_SIZE - 1; i > 0; i--) {
                    readline_hist[i] = readline_hist[i - 1];
                }
                readline_hist[0] = strdup(vstr_str(line));
                return 1;
            } else if (c == 27) {
                escape = true;
            } else if (c == 127) {
                if (vstr_len(line) > len) {
                    vstr_cut_tail(line, 1);
300
                    stdout_tx_str("\b \b");
Damien's avatar
Damien committed
301
302
303
                }
            } else if (32 <= c && c <= 126) {
                vstr_add_char(line, c);
304
                stdout_tx_str(line->buf + line->len - 1);
305
            }
Damien's avatar
Damien committed
306
307
308
309
310
311
312
313
314
315
316
317
318
        } else if (escape == 1) {
            if (c == '[') {
                escape = 2;
            } else {
                escape = 0;
            }
        } else if (escape == 2) {
            escape = 0;
            if (c == 'A') {
                // up arrow
                if (hist_num < READLINE_HIST_SIZE && readline_hist[hist_num] != NULL) {
                    // erase line
                    for (int i = line->len - len; i > 0; i--) {
319
                        stdout_tx_str("\b \b");
Damien's avatar
Damien committed
320
321
322
323
324
                    }
                    // set line to history
                    line->len = len;
                    vstr_add_str(line, readline_hist[hist_num]);
                    // draw line
325
                    stdout_tx_str(readline_hist[hist_num]);
Damien's avatar
Damien committed
326
327
328
329
330
331
                    // increase hist num
                    hist_num += 1;
                }
            }
        } else {
            escape = 0;
332
        }
Damien's avatar
Damien committed
333
        sys_tick_delay_ms(10);
334
    }
335
336
}

337
void do_repl(void) {
338
339
    stdout_tx_str("Micro Python 0.5; STM32F405RG; PYBv2\r\n");
    stdout_tx_str("Type \"help\" for more information.\r\n");
340
341
342

    vstr_t line;
    vstr_init(&line);
343
344

    for (;;) {
345
346
347
        vstr_reset(&line);
        int ret = readline(&line, ">>> ");
        if (ret == 0) {
348
            // EOF
349
350
351
352
353
            break;
        }

        if (vstr_len(&line) == 0) {
            continue;
354
        }
355
356

        if (py_repl_is_compound_stmt(vstr_str(&line))) {
357
            for (;;) {
358
359
360
361
362
                vstr_add_char(&line, '\n');
                int len = vstr_len(&line);
                int ret = readline(&line, "... ");
                if (ret == 0 || vstr_len(&line) == len) {
                    // done entering compound statement
363
364
365
366
367
368
                    break;
                }
            }
        }

        py_lexer_str_buf_t sb;
369
        py_lexer_t *lex = py_lexer_new_from_str_len("<stdin>", vstr_str(&line), vstr_len(&line), false, &sb);
370
371
372
373
374
375
376
377
378
        py_parse_node_t pn = py_parse(lex, PY_PARSE_SINGLE_INPUT);
        py_lexer_free(lex);

        if (pn != PY_PARSE_NODE_NULL) {
            bool comp_ok = py_compile(pn, true);
            if (comp_ok) {
                py_obj_t module_fun = rt_make_function_from_id(1);
                if (module_fun != py_const_none) {
                    nlr_buf_t nlr;
379
                    uint32_t start = sys_tick_counter;
380
381
382
                    if (nlr_push(&nlr) == 0) {
                        rt_call_function_0(module_fun);
                        nlr_pop();
383
384
                        uint32_t ticks = sys_tick_counter - start; // TODO implement a function that does this properly
                        printf("(took %lu ms)\n", ticks);
385
386
387
388
389
390
391
392
393
                    } else {
                        // uncaught exception
                        py_obj_print((py_obj_t)nlr.ret_val);
                        printf("\n");
                    }
                }
            }
        }
    }
394

395
    stdout_tx_str("\r\n");
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
}

bool do_file(const char *filename) {
    py_lexer_file_buf_t fb;
    py_lexer_t *lex = py_lexer_new_from_file(filename, &fb);

    if (lex == NULL) {
        printf("could not open file '%s' for reading\n", filename);
        return false;
    }

    py_parse_node_t pn = py_parse(lex, PY_PARSE_FILE_INPUT);
    py_lexer_free(lex);

    if (pn == PY_PARSE_NODE_NULL) {
        return false;
    }

    bool comp_ok = py_compile(pn, false);
    if (!comp_ok) {
        return false;
    }

    py_obj_t module_fun = rt_make_function_from_id(1);
    if (module_fun == py_const_none) {
        return false;
    }

    nlr_buf_t nlr;
    if (nlr_push(&nlr) == 0) {
        rt_call_function_0(module_fun);
        nlr_pop();
        return true;
    } else {
        // uncaught exception
        py_obj_print((py_obj_t)nlr.ret_val);
        printf("\n");
        return false;
    }
435
436
}

437
438
439
440
441
442
#define RAM_START (0x20000000) // fixed for chip
#define HEAP_END  (0x2001c000) // tunable
#define RAM_END   (0x20020000) // fixed for chip

void gc_helper_get_regs_and_clean_stack(machine_uint_t *regs, machine_uint_t heap_end);

443
void gc_collect(void) {
444
    uint32_t start = sys_tick_counter;
Damien's avatar
Damien committed
445
    gc_collect_start();
446
447
448
449
    gc_collect_root((void**)RAM_START, (((uint32_t)&_heap_start) - RAM_START) / 4);
    machine_uint_t regs[10];
    gc_helper_get_regs_and_clean_stack(regs, HEAP_END);
    gc_collect_root((void**)HEAP_END, (RAM_END - HEAP_END) / 4); // will trace regs since they now live in this function on the stack
Damien's avatar
Damien committed
450
    gc_collect_end();
451
452
453
454
455
456
457
458
459
    uint32_t ticks = sys_tick_counter - start; // TODO implement a function that does this properly
    gc_info_t info;
    gc_info(&info);
    printf("GC@%lu %lums\n", start, ticks);
    printf(" %lu total\n", info.total);
    printf(" %lu : %lu\n", info.used, info.free);
    printf(" 1=%lu 2=%lu m=%lu\n", info.num_1block, info.num_2block, info.max_block);
}

460
py_obj_t pyb_gc(void) {
461
462
    gc_collect();
    return py_const_none;
Damien's avatar
Damien committed
463
464
}

465
466
467
468
469
470
471
472
473
// PWM
// TIM2 and TIM5 have CH1, CH2, CH3, CH4 on PA0-PA3 respectively
// they are both 32-bit counters
// 16-bit prescaler
// TIM2_CH3 also on PB10 (used below)
void servo_init(void) {
    // TIM2 clock enable
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);

474
475
476
    // for PB10
    /*
    // GPIOB Configuration: TIM2_CH3 (PB10)
477
478
479
480
481
482
483
484
485
486
    GPIO_InitTypeDef GPIO_InitStructure;
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
    GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
    GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
    GPIO_Init(GPIOB, &GPIO_InitStructure);

    // Connect TIM2 pins to AF1
    GPIO_PinAFConfig(GPIOB, GPIO_PinSource10, GPIO_AF_TIM2);
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
    */

    // for PA0, PA1, PA2, PA3
    {
        // GPIOA Configuration: TIM2_CH0, TIM2_CH1 (PA0, PA1)
        GPIO_InitTypeDef GPIO_InitStructure;
        GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_3;
        GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
        GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
        GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
        GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
        GPIO_Init(GPIOA, &GPIO_InitStructure);

        // Connect TIM2 pins to AF1
        GPIO_PinAFConfig(GPIOA, GPIO_PinSource0, GPIO_AF_TIM2);
        GPIO_PinAFConfig(GPIOA, GPIO_PinSource1, GPIO_AF_TIM2);
        GPIO_PinAFConfig(GPIOA, GPIO_PinSource2, GPIO_AF_TIM2);
        GPIO_PinAFConfig(GPIOA, GPIO_PinSource3, GPIO_AF_TIM2);
    }
506
507
508
509
510
511
512
513
514
515
516
517

    // Compute the prescaler value so TIM2 runs at 100kHz
    uint16_t PrescalerValue = (uint16_t) ((SystemCoreClock / 2) / 100000) - 1;

    // Time base configuration
    TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
    TIM_TimeBaseStructure.TIM_Period = 2000; // timer cycles at 50Hz
    TIM_TimeBaseStructure.TIM_Prescaler = PrescalerValue;
    TIM_TimeBaseStructure.TIM_ClockDivision = 0;
    TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
    TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);

518
    // PWM Mode configuration
519
520
521
522
523
    TIM_OCInitTypeDef TIM_OCInitStructure;
    TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;
    TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
    TIM_OCInitStructure.TIM_Pulse = 150; // units of 10us
    TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High;
524
525
526
527
    TIM_OC1Init(TIM2, &TIM_OCInitStructure); // channel 1
    TIM_OC2Init(TIM2, &TIM_OCInitStructure); // channel 2
    TIM_OC3Init(TIM2, &TIM_OCInitStructure); // channel 3
    TIM_OC4Init(TIM2, &TIM_OCInitStructure); // channel 4
528
529

    // ?
530
531
532
533
    TIM_OC1PreloadConfig(TIM2, TIM_OCPreload_Enable); // channel 1
    TIM_OC2PreloadConfig(TIM2, TIM_OCPreload_Enable); // channel 2
    TIM_OC3PreloadConfig(TIM2, TIM_OCPreload_Enable); // channel 3
    TIM_OC4PreloadConfig(TIM2, TIM_OCPreload_Enable); // channel 4
534
535
536
537
538
539
540
541

    // ?
    TIM_ARRPreloadConfig(TIM2, ENABLE);

    // TIM2 enable counter
    TIM_Cmd(TIM2, ENABLE);
}

542
543
py_obj_t pyb_servo_set(py_obj_t port, py_obj_t value) {
    int p = py_obj_get_int(port);
Damien's avatar
Damien committed
544
    int v = py_obj_get_int(value);
545
546
    if (v < 100) { v = 100; }
    if (v > 200) { v = 200; }
547
548
549
550
551
552
    switch (p) {
        case 1: TIM2->CCR1 = v; break;
        case 2: TIM2->CCR2 = v; break;
        case 3: TIM2->CCR3 = v; break;
        case 4: TIM2->CCR4 = v; break;
    }
553
554
555
    return py_const_none;
}

556
557
558
559
560
561
562
563
py_obj_t pyb_pwm_set(py_obj_t period, py_obj_t pulse) {
    int pe = py_obj_get_int(period);
    int pu = py_obj_get_int(pulse);
    TIM2->ARR = pe;
    TIM2->CCR3 = pu;
    return py_const_none;
}

Damien's avatar
Damien committed
564
565
#define MMA_ADDR (0x4c)

566
567
int mma_buf[12];

568
py_obj_t pyb_mma_read(void) {
569
570
571
572
573
574
    for (int i = 0; i <= 6; i += 3) {
        mma_buf[0 + i] = mma_buf[0 + i + 3];
        mma_buf[1 + i] = mma_buf[1 + i + 3];
        mma_buf[2 + i] = mma_buf[2 + i + 3];
    }

Damien's avatar
Damien committed
575
576
577
    mma_start(MMA_ADDR, 1);
    mma_send_byte(0);
    mma_restart(MMA_ADDR, 0);
578
    for (int i = 0; i <= 2; i++) {
Damien's avatar
Damien committed
579
580
581
582
        int v = mma_read_ack() & 0x3f;
        if (v & 0x20) {
            v |= ~0x1f;
        }
583
        mma_buf[9 + i] = v;
Damien's avatar
Damien committed
584
    }
585
586
587
588
589
590
591
592
    int jolt_info = mma_read_nack();

    py_obj_t data[4];
    data[0] = py_obj_new_int(jolt_info);
    data[1] = py_obj_new_int(mma_buf[2] + mma_buf[5] + mma_buf[8] + mma_buf[11]);
    data[2] = py_obj_new_int(mma_buf[1] + mma_buf[4] + mma_buf[7] + mma_buf[10]);
    data[3] = py_obj_new_int(mma_buf[0] + mma_buf[3] + mma_buf[6] + mma_buf[9]);

Damien's avatar
Damien committed
593
594
595
    return rt_build_tuple(4, data); // items in reverse order in data
}

596
py_obj_t pyb_hid_send_report(py_obj_t arg) {
Damien's avatar
Damien committed
597
    py_obj_t *items = py_obj_get_array_fixed_n(arg, 4);
598
    uint8_t data[4];
Damien's avatar
Damien committed
599
600
601
602
    data[0] = py_obj_get_int(items[0]);
    data[1] = py_obj_get_int(items[1]);
    data[2] = py_obj_get_int(items[2]);
    data[3] = py_obj_get_int(items[3]);
603
604
605
606
    usb_hid_send_report(data);
    return py_const_none;
}

607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
static void rtc_init(void) {
    /* Enable the PWR clock */
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);

    /* Allow access to RTC */
    PWR_BackupAccessCmd(ENABLE);

    /* Enable the LSE OSC */
    RCC_LSEConfig(RCC_LSE_ON);

    /* Wait till LSE is ready */
    while(RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET) {
    }

    /* Select the RTC Clock Source */
    RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);
    /* ck_spre(1Hz) = RTCCLK(LSE) /(uwAsynchPrediv + 1)*(uwSynchPrediv + 1)*/
    uint32_t uwSynchPrediv = 0xFF;
    uint32_t uwAsynchPrediv = 0x7F;

    /* Enable the RTC Clock */
    RCC_RTCCLKCmd(ENABLE);

    /* Wait for RTC APB registers synchronisation */
    RTC_WaitForSynchro();

    /* Configure the RTC data register and RTC prescaler */
    RTC_InitTypeDef RTC_InitStructure;
    RTC_InitStructure.RTC_AsynchPrediv = uwAsynchPrediv;
    RTC_InitStructure.RTC_SynchPrediv = uwSynchPrediv;
    RTC_InitStructure.RTC_HourFormat = RTC_HourFormat_24;
    RTC_Init(&RTC_InitStructure);

    // Set the date (BCD)
    RTC_DateTypeDef RTC_DateStructure;
    RTC_DateStructure.RTC_Year = 0x13;
    RTC_DateStructure.RTC_Month = RTC_Month_October;
    RTC_DateStructure.RTC_Date = 0x26;
    RTC_DateStructure.RTC_WeekDay = RTC_Weekday_Saturday;
    RTC_SetDate(RTC_Format_BCD, &RTC_DateStructure);

    // Set the time (BCD)
    RTC_TimeTypeDef RTC_TimeStructure;
    RTC_TimeStructure.RTC_H12     = RTC_H12_AM;
    RTC_TimeStructure.RTC_Hours   = 0x01;
    RTC_TimeStructure.RTC_Minutes = 0x53;
    RTC_TimeStructure.RTC_Seconds = 0x00;
    RTC_SetTime(RTC_Format_BCD, &RTC_TimeStructure);

    // Indicator for the RTC configuration
    //RTC_WriteBackupRegister(RTC_BKP_DR0, 0x32F2);
}

py_obj_t pyb_rtc_read(void) {
    RTC_TimeTypeDef RTC_TimeStructure;
    RTC_GetTime(RTC_Format_BIN, &RTC_TimeStructure);
    printf("%02d:%02d:%02d\n", RTC_TimeStructure.RTC_Hours, RTC_TimeStructure.RTC_Minutes, RTC_TimeStructure.RTC_Seconds);
    return py_const_none;
}

Damien's avatar
Damien committed
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
void file_obj_print(py_obj_t o) {
    FIL *fp;
    py_user_get_data(o, (machine_uint_t*)&fp, NULL);
    printf("<file %p>", fp);
}

py_obj_t file_obj_read(py_obj_t self, py_obj_t arg) {
    FIL *fp;
    py_user_get_data(self, (machine_uint_t*)&fp, NULL);
    int n = py_obj_get_int(arg);
    char *buf = m_new(char, n + 1);
    UINT n_out;
    f_read(fp, buf, n, &n_out);
    buf[n_out] = 0;
    return py_obj_new_str(qstr_from_str_take(buf));
}

py_obj_t file_obj_write(py_obj_t self, py_obj_t arg) {
    FIL *fp;
    py_user_get_data(self, (machine_uint_t*)&fp, NULL);
    const char *s = qstr_str(py_obj_get_qstr(arg));
    UINT n_out;
    FRESULT res = f_write(fp, s, strlen(s), &n_out);
    if (res != FR_OK) {
        printf("File error: could not write to file; error code %d\n", res);
    } else if (n_out != strlen(s)) {
        printf("File error: could not write all data to file; wrote %d / %d bytes\n", n_out, strlen(s));
    }
    return py_const_none;
}

py_obj_t file_obj_close(py_obj_t self) {
    FIL *fp;
    py_user_get_data(self, (machine_uint_t*)&fp, NULL);
    f_close(fp);
    return py_const_none;
}

// TODO gc hook to close the file if not already closed
const py_user_info_t file_obj_info = {
    "File",
    file_obj_print,
    {
        {"read", 1, file_obj_read},
        {"write", 1, file_obj_write},
        {"close", 0, file_obj_close},
        {NULL, 0, NULL},
    }
};

py_obj_t pyb_io_open(py_obj_t o_filename, py_obj_t o_mode) {
    const char *filename = qstr_str(py_obj_get_qstr(o_filename));
    const char *mode = qstr_str(py_obj_get_qstr(o_mode));
    FIL *fp = m_new(FIL, 1);
    if (mode[0] == 'r') {
        // open for reading
        FRESULT res = f_open(fp, filename, FA_READ);
        if (res != FR_OK) {
            printf("FileNotFoundError: [Errno 2] No such file or directory: '%s'\n", filename);
            return py_const_none;
        }
    } else if (mode[0] == 'w') {
        // open for writing, truncate the file first
        FRESULT res = f_open(fp, filename, FA_WRITE | FA_CREATE_ALWAYS);
        if (res != FR_OK) {
            printf("?FileError: could not create file: '%s'\n", filename);
            return py_const_none;
        }
    } else {
        printf("ValueError: invalid mode: '%s'\n", mode);
        return py_const_none;
    }
    return py_obj_new_user(&file_obj_info, (machine_uint_t)fp, 0);
}

742
743
744
745
py_obj_t pyb_rng_get(void) {
    return py_obj_new_int(RNG_GetRandomNumber() >> 16);
}

746
int main(void) {
747
    // TODO disable JTAG
Damien's avatar
Damien committed
748

749
750
751
752
753
754
    // set interrupt priority config to use all 4 bits for pre-empting
    NVIC_PriorityGroupConfig(NVIC_PriorityGroup_4);

    // enable the CCM RAM and the GPIO's
    RCC->AHB1ENR |= RCC_AHB1ENR_CCMDATARAMEN | RCC_AHB1ENR_GPIOAEN | RCC_AHB1ENR_GPIOBEN | RCC_AHB1ENR_GPIOCEN;

755
    // configure SDIO pins to be high to start with (apparently makes it more robust)
756
757
758
759
760
761
762
763
764
765
766
767
768
769
    {
      GPIO_InitTypeDef GPIO_InitStructure;
      GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | GPIO_Pin_11 | GPIO_Pin_12;
      GPIO_InitStructure.GPIO_Speed = GPIO_Speed_25MHz;
      GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
      GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
      GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
      GPIO_Init(GPIOC, &GPIO_InitStructure);

      // Configure PD.02 CMD line
      GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
      GPIO_Init(GPIOD, &GPIO_InitStructure);
    }

770
771
    // basic sub-system init
    sys_tick_init();
Damien's avatar
Damien committed
772
    led_init();
773
    rtc_init();
774
775
776
777
778

    // turn on LED to indicate bootup
    led_state(PYB_LED_G1, 1);

    // more sub-system init
Damien's avatar
Damien committed
779
    sw_init();
780
    storage_init();
781
    usart_init();
Damien's avatar
Damien committed
782

783
784
    int first_soft_reset = true;

785
786
soft_reset:

Damien's avatar
Damien committed
787
    // GC init
788
    gc_init(&_heap_start, (void*)HEAP_END);
Damien's avatar
Damien committed
789

790
    // Micro Python init
791
792
    qstr_init();
    rt_init();
793

794
    // LCD init
795
    //lcd_init(); disabled while servos on PA0 PA1
796

797
798
799
    // servo
    servo_init();

800
801
802
    // audio
    audio_init();

803
804
805
    // timer
    timer_init();

806
807
808
809
810
811
    // RNG
    {
        RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_RNG, ENABLE);
        RNG_Cmd(ENABLE);
    }

812
    // add some functions to the python namespace
813
814
815
816
817
    {
        py_obj_t m = py_module_new();
        rt_store_attr(m, qstr_from_str_static("info"), rt_make_function_0(pyb_info));
        rt_store_attr(m, qstr_from_str_static("source_dir"), rt_make_function_1(pyb_source_dir));
        rt_store_attr(m, qstr_from_str_static("main"), rt_make_function_1(pyb_main));
818
        rt_store_attr(m, qstr_from_str_static("sync"), rt_make_function_0(pyb_sync));
819
820
821
822
        rt_store_attr(m, qstr_from_str_static("gc"), rt_make_function_0(pyb_gc));
        rt_store_attr(m, qstr_from_str_static("delay"), rt_make_function_1(pyb_delay));
        rt_store_attr(m, qstr_from_str_static("led"), rt_make_function_1(pyb_led));
        rt_store_attr(m, qstr_from_str_static("sw"), rt_make_function_0(pyb_sw));
823
        rt_store_attr(m, qstr_from_str_static("servo"), rt_make_function_2(pyb_servo_set));
824
        rt_store_attr(m, qstr_from_str_static("pwm"), rt_make_function_2(pyb_pwm_set));
Damien's avatar
Damien committed
825
        rt_store_attr(m, qstr_from_str_static("mma"), rt_make_function_0(pyb_mma_read));
826
        rt_store_attr(m, qstr_from_str_static("hid"), rt_make_function_1(pyb_hid_send_report));
827
        rt_store_attr(m, qstr_from_str_static("time"), rt_make_function_0(pyb_rtc_read));
828
829
830
        rt_store_attr(m, qstr_from_str_static("uout"), rt_make_function_1(pyb_usart_send));
        rt_store_attr(m, qstr_from_str_static("uin"), rt_make_function_0(pyb_usart_receive));
        rt_store_attr(m, qstr_from_str_static("ustat"), rt_make_function_0(pyb_usart_status));
831
        rt_store_attr(m, qstr_from_str_static("rng"), rt_make_function_0(pyb_rng_get));
832
        rt_store_name(qstr_from_str_static("pyb"), m);
Damien's avatar
Damien committed
833
834

        rt_store_name(qstr_from_str_static("open"), rt_make_function_2(pyb_io_open));
835
    }
836

837
838
    // print a message to the LCD
    lcd_print_str(" micro py board\n");
Damien's avatar
Damien committed
839

840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
    // local filesystem init
    {
        // try to mount the flash
        FRESULT res = f_mount(&fatfs0, "0:", 1);
        if (res == FR_OK) {
            // mount sucessful
        } else if (res == FR_NO_FILESYSTEM) {
            // no filesystem, so create a fresh one

            // LED on to indicate creation of LFS
            led_state(PYB_LED_R2, 1);
            uint32_t stc = sys_tick_counter;

            res = f_mkfs("0:", 0, 0);
            if (res == FR_OK) {
                // success creating fresh LFS
            } else {
                __fatal_error("could not create LFS");
            }

860
861
            // keep LED on for at least 200ms
            sys_tick_wait_at_least(stc, 200);
862
863
864
865
            led_state(PYB_LED_R2, 0);
        } else {
            __fatal_error("could not access LFS");
        }
Damien's avatar
Damien committed
866
867
    }

868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
    // make sure we have a /boot.py
    {
        FILINFO fno;
        FRESULT res = f_stat("0:/boot.py", &fno);
        if (res == FR_OK) {
            if (fno.fattrib & AM_DIR) {
                // exists as a directory
                // TODO handle this case
                // see http://elm-chan.org/fsw/ff/img/app2.c for a "rm -rf" implementation
            } else {
                // exists as a file, good!
            }
        } else {
            // doesn't exist, create fresh file

            // LED on to indicate creation of boot.py
            led_state(PYB_LED_R2, 1);
            uint32_t stc = sys_tick_counter;

            FIL fp;
            f_open(&fp, "0:/boot.py", FA_WRITE | FA_CREATE_ALWAYS);
            UINT n;
890
            f_write(&fp, fresh_boot_py, sizeof(fresh_boot_py) - 1 /* don't count null terminator */, &n);
891
892
893
            // TODO check we could write n bytes
            f_close(&fp);

894
895
            // keep LED on for at least 200ms
            sys_tick_wait_at_least(stc, 200);
896
897
898
899
            led_state(PYB_LED_R2, 0);
        }
    }

900
901
902
903
904
    // run /boot.py
    if (!do_file("0:/boot.py")) {
        flash_error(4);
    }

905
906
907
    // USB
    usb_init();

Damien's avatar
Damien committed
908
    // MMA
909
    if (first_soft_reset) {
Damien's avatar
Damien committed
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
        // init and reset address to zero
        mma_init();
        mma_start(MMA_ADDR, 1);
        mma_send_byte(0);
        mma_stop();

        /*
        // read and print all 11 registers
        mma_start(MMA_ADDR, 1);
        mma_send_byte(0);
        mma_restart(MMA_ADDR, 0);
        for (int i = 0; i <= 0xa; i++) {
            int data;
            if (i == 0xa) {
                data = mma_read_nack();
            } else {
                data = mma_read_ack();
            }
            printf(" %02x", data);
        }
        printf("\n");
        */

        // put into active mode
        mma_start(MMA_ADDR, 1);
        mma_send_byte(7); // mode
        mma_send_byte(1); // active mode
        mma_stop();

        /*
        // infinite loop to read values
        for (;;) {
            sys_tick_delay_ms(500);

            mma_start(MMA_ADDR, 1);
            mma_send_byte(0);
            mma_restart(MMA_ADDR, 0);
            for (int i = 0; i <= 3; i++) {
                int data;
                if (i == 3) {
                    data = mma_read_nack();
                    printf(" %02x\n", data);
                } else {
                    data = mma_read_ack() & 0x3f;
                    if (data & 0x20) {
                        data |= ~0x1f;
                    }
                    printf(" % 2d", data);
                }
            }
        }
        */
    }

964
965
    // turn boot-up LED off
    led_state(PYB_LED_G1, 0);
966

967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
    // run main script
    {
        vstr_t *vstr = vstr_new();
        vstr_add_str(vstr, "0:/");
        if (pyb_config_source_dir == 0) {
            vstr_add_str(vstr, "src");
        } else {
            vstr_add_str(vstr, qstr_str(pyb_config_source_dir));
        }
        vstr_add_char(vstr, '/');
        if (pyb_config_main == 0) {
            vstr_add_str(vstr, "main.py");
        } else {
            vstr_add_str(vstr, qstr_str(pyb_config_main));
        }
        if (!do_file(vstr_str(vstr))) {
            flash_error(3);
984
        }
985
        vstr_free(vstr);
986
987
    }

Damien's avatar
Damien committed
988
    //printf("init;al=%u\n", m_get_total_bytes_allocated()); // 1600, due to qstr_init
989
    //sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
990
991

    // Python!
992
    if (0) {
Damien's avatar
Damien committed
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
        //const char *pysrc = "def f():\n  x=x+1\nprint(42)\n";
        const char *pysrc =
            // impl01.py
            /*
            "x = 0\n"
            "while x < 400:\n"
            "    y = 0\n"
            "    while y < 400:\n"
            "        z = 0\n"
            "        while z < 400:\n"
            "            z = z + 1\n"
            "        y = y + 1\n"
            "    x = x + 1\n";
            */
            // impl02.py
1008
            /*
Damien's avatar
Damien committed
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
            "#@micropython.native\n"
            "def f():\n"
            "    x = 0\n"
            "    while x < 400:\n"
            "        y = 0\n"
            "        while y < 400:\n"
            "            z = 0\n"
            "            while z < 400:\n"
            "                z = z + 1\n"
            "            y = y + 1\n"
            "        x = x + 1\n"
            "f()\n";
1021
            */
1022
            /*
Damien's avatar
Damien committed
1023
1024
1025
1026
1027
1028
1029
            "print('in python!')\n"
            "x = 0\n"
            "while x < 4:\n"
            "    pyb_led(True)\n"
            "    pyb_delay(201)\n"
            "    pyb_led(False)\n"
            "    pyb_delay(201)\n"
1030
            "    x += 1\n"
Damien's avatar
Damien committed
1031
1032
1033
            "print('press me!')\n"
            "while True:\n"
            "    pyb_led(pyb_sw())\n";
1034
            */
Damien's avatar
Damien committed
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
            /*
            // impl16.py
            "@micropython.asm_thumb\n"
            "def delay(r0):\n"
            "    b(loop_entry)\n"
            "    label(loop1)\n"
            "    movw(r1, 55999)\n"
            "    label(loop2)\n"
            "    subs(r1, r1, 1)\n"
            "    cmp(r1, 0)\n"
            "    bgt(loop2)\n"
            "    subs(r0, r0, 1)\n"
            "    label(loop_entry)\n"
            "    cmp(r0, 0)\n"
            "    bgt(loop1)\n"
            "print('in python!')\n"
            "@micropython.native\n"
            "def flash(n):\n"
            "    x = 0\n"
            "    while x < n:\n"
            "        pyb_led(True)\n"
            "        delay(249)\n"
            "        pyb_led(False)\n"
            "        delay(249)\n"
            "        x = x + 1\n"
            "flash(20)\n";
            */
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
            // impl18.py
            /*
            "# basic exceptions\n"
            "x = 1\n"
            "try:\n"
            "    x.a()\n"
            "except:\n"
            "    print(x)\n";
            */
            // impl19.py
            "# for loop\n"
            "def f():\n"
            "    for x in range(400):\n"
            "        for y in range(400):\n"
            "            for z in range(400):\n"
            "                pass\n"
            "f()\n";
Damien's avatar
Damien committed
1079

1080
1081
        py_lexer_str_buf_t py_lexer_str_buf;
        py_lexer_t *lex = py_lexer_new_from_str_len("<stdin>", pysrc, strlen(pysrc), false, &py_lexer_str_buf);
Damien's avatar
Damien committed
1082

1083
1084
1085
1086
1087
1088
        // nalloc=1740;6340;6836 -> 140;4600;496 bytes for lexer, parser, compiler
        printf("lex; al=%u\n", m_get_total_bytes_allocated());
        sys_tick_delay_ms(1000);
        py_parse_node_t pn = py_parse(lex, PY_PARSE_FILE_INPUT);
        py_lexer_free(lex);
        if (pn != PY_PARSE_NODE_NULL) {
Damien's avatar
Damien committed
1089
            printf("pars;al=%u\n", m_get_total_bytes_allocated());
1090
            sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
1091
            //parse_node_show(pn, 0);
1092
            bool comp_ok = py_compile(pn, false);
Damien's avatar
Damien committed
1093
            printf("comp;al=%u\n", m_get_total_bytes_allocated());
1094
            sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
1095

1096
1097
1098
            if (!comp_ok) {
                printf("compile error\n");
            } else {
Damien's avatar
Damien committed
1099
1100
1101
1102
                // execute it!

                py_obj_t module_fun = rt_make_function_from_id(1);

1103
                // flash once
1104
                led_state(PYB_LED_G1, 1);
1105
                sys_tick_delay_ms(100);
1106
                led_state(PYB_LED_G1, 0);
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122

                nlr_buf_t nlr;
                if (nlr_push(&nlr) == 0) {
                    py_obj_t ret = rt_call_function_0(module_fun);
                    printf("done! got: ");
                    py_obj_print(ret);
                    printf("\n");
                    nlr_pop();
                } else {
                    // uncaught exception
                    printf("exception: ");
                    py_obj_print((py_obj_t)nlr.ret_val);
                    printf("\n");
                }

                // flash once
1123
                led_state(PYB_LED_G1, 1);
1124
                sys_tick_delay_ms(100);
1125
                led_state(PYB_LED_G1, 0);
Damien's avatar
Damien committed
1126

1127
                sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
1128
                printf("nalloc=%u\n", m_get_total_bytes_allocated());
1129
                sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
1130
1131
1132
1133
            }
        }
    }

1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
    // HID example
    if (0) {
        uint8_t data[4];
        data[0] = 0;
        data[1] = 1;
        data[2] = -2;
        data[3] = 0;
        for (;;) {
            if (sw_get()) {
                data[0] = 0x01; // 0x04 is middle, 0x02 is right
            } else {
                data[0] = 0x00;
            }
            mma_start(MMA_ADDR, 1);
            mma_send_byte(0);
            mma_restart(MMA_ADDR, 0);
            for (int i = 0; i <= 1; i++) {
                int v = mma_read_ack() & 0x3f;
                if (v & 0x20) {
                    v |= ~0x1f;
                }
                data[1 + i] = v;
            }
            mma_read_nack();
            usb_hid_send_report(data);
            sys_tick_delay_ms(15);
        }
    }

1163
1164
    do_repl();

Damien's avatar
Damien committed
1165
1166
    // benchmark C version of impl02.py
    if (0) {
1167
        led_state(PYB_LED_G1, 1);
1168
        sys_tick_delay_ms(100);
1169
        led_state(PYB_LED_G1, 0);
Damien's avatar
Damien committed
1170
        impl02_c_version();
1171
        led_state(PYB_LED_G1, 1);
1172
        sys_tick_delay_ms(100);
1173
        led_state(PYB_LED_G1, 0);
Damien's avatar
Damien committed
1174
1175
1176
    }

    // SD card testing
1177
1178
    if (1) {
        extern void sdio_init(void);
1179
        //sdio_init();
Damien's avatar
Damien committed
1180
1181
    }

1182
1183
1184
1185
    printf("PYB: sync filesystems\n");
    pyb_sync();

    printf("PYB: soft reboot\n");
1186
1187

    first_soft_reset = false;
1188
    goto soft_reset;
Damien's avatar
Damien committed
1189
}
1190
1191
1192
1193
1194

double __aeabi_f2d(float x) {
    // TODO
    return 0.0;
}
Damien's avatar
Damien committed
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204

float __aeabi_d2f(double x) {
    // TODO
    return 0.0;
}

double sqrt(double x) {
    // TODO
    return 0.0;
}
1205
1206
1207
1208
1209

machine_float_t machine_sqrt(machine_float_t x) {
    // TODO
    return x;
}