lcd.c 12 KB
Newer Older
1
#include <string.h>
2
#include <stm32f4xx_gpio.h>
Damien's avatar
Damien committed
3

4
#include "nlr.h"
Damien's avatar
Damien committed
5
#include "misc.h"
6
#include "mpconfig.h"
7
#include "qstr.h"
8
#include "parse.h"
9
#include "obj.h"
10
11
#include "runtime.h"

12
13
#include "systick.h"
#include "font_petme128_8x8.h"
14
#include "lcd.h"
15

16
#if defined(PYBOARD3)
17
18
19
20
21
22
#define PYB_LCD_PORT        (GPIOA)
#define PYB_LCD_CS1_PIN     (GPIO_Pin_0)
#define PYB_LCD_RST_PIN     (GPIO_Pin_1)
#define PYB_LCD_A0_PIN      (GPIO_Pin_2)
#define PYB_LCD_SCL_PIN     (GPIO_Pin_3)
#define PYB_LCD_SI_PIN      (GPIO_Pin_4)
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
#elif defined(PYBOARD4)
// X position
#define PYB_LCD_PORT       (GPIOA)
#define PYB_LCD_CS1_PIN    (GPIO_Pin_2) // X3
#define PYB_LCD_RST_PIN    (GPIO_Pin_3) // X4
#define PYB_LCD_A0_PIN     (GPIO_Pin_4) // X5
#define PYB_LCD_SCL_PIN    (GPIO_Pin_5) // X6
#define PYB_LCD_SI_PIN     (GPIO_Pin_7) // X8
#define PYB_LCD_BL_PORT    (GPIOC)
#define PYB_LCD_BL_PIN     (GPIO_Pin_5) // X12
/*
// Y position
#define PYB_LCD_PORT       (GPIOB)
#define PYB_LCD_CS1_PIN    (GPIO_Pin_8) // Y3 = PB8
#define PYB_LCD_RST_PIN    (GPIO_Pin_9) // Y4 = PB9
#define PYB_LCD_A0_PIN     (GPIO_Pin_12) // Y5 = PB12
#define PYB_LCD_SCL_PIN    (GPIO_Pin_13) // Y6 = PB13
#define PYB_LCD_SI_PIN     (GPIO_Pin_15) // Y8 = PB15
#define PYB_LCD_BL_PORT    (GPIOB)
#define PYB_LCD_BL_PIN     (GPIO_Pin_1) // Y12 = PB1
*/
#endif
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112

#define LCD_INSTR (0)
#define LCD_DATA (1)

static void lcd_out(int instr_data, uint8_t i) {
    sys_tick_delay_ms(0);
    PYB_LCD_PORT->BSRRH = PYB_LCD_CS1_PIN; // CS=0; enable
    if (instr_data == LCD_INSTR) {
        PYB_LCD_PORT->BSRRH = PYB_LCD_A0_PIN; // A0=0; select instr reg
    } else {
        PYB_LCD_PORT->BSRRL = PYB_LCD_A0_PIN; // A0=1; select data reg
    }
    // send byte bigendian, latches on rising clock
    for (uint32_t n = 0; n < 8; n++) {
        sys_tick_delay_ms(0);
        PYB_LCD_PORT->BSRRH = PYB_LCD_SCL_PIN; // SCL=0
        if ((i & 0x80) == 0) {
            PYB_LCD_PORT->BSRRH = PYB_LCD_SI_PIN; // SI=0
        } else {
            PYB_LCD_PORT->BSRRL = PYB_LCD_SI_PIN; // SI=1
        }
        i <<= 1;
        sys_tick_delay_ms(0);
        PYB_LCD_PORT->BSRRL = PYB_LCD_SCL_PIN; // SCL=1
    }
    PYB_LCD_PORT->BSRRL = PYB_LCD_CS1_PIN; // CS=1; disable

    /*
    in Python, native types:
    CS1_PIN(const) = 0
    n = int(0)
    delay_ms(0)
    PORT[word:BSRRH] = 1 << CS1_PIN
    for n in range(0, 8):
        delay_ms(0)
        PORT[word:BSRRH] = 1 << SCL_PIN
        if i & 0x80 == 0:
            PORT[word:BSRRH] = 1 << SI_PIN
        else:
            PORT[word:BSRRL] = 1 << SI_PIN
        i <<= 1
        delay_ms(0)
        PORT[word:BSRRL] = 1 << SCL_PIN
    */
}

/*
static void lcd_data_out(uint8_t i) {
    delay_ms(0);
    PYB_LCD_PORT->BSRRH = PYB_LCD_CS1_PIN; // CS=0; enable
    PYB_LCD_PORT->BSRRL = PYB_LCD_A0_PIN; // A0=1; select data reg
    // send byte bigendian, latches on rising clock
    for (uint32_t n = 0; n < 8; n++) {
        delay_ms(0);
        PYB_LCD_PORT->BSRRH = PYB_LCD_SCL_PIN; // SCL=0
        if ((i & 0x80) == 0) {
            PYB_LCD_PORT->BSRRH = PYB_LCD_SI_PIN; // SI=0
        } else {
            PYB_LCD_PORT->BSRRL = PYB_LCD_SI_PIN; // SI=1
        }
        i <<= 1;
        delay_ms(0);
        PYB_LCD_PORT->BSRRL = PYB_LCD_SCL_PIN; // SCL=1
    }
    PYB_LCD_PORT->BSRRL = PYB_LCD_CS1_PIN; // CS=1; disable
}
*/

113
114
// writes 8 vertical pixels
// pos 0 is upper left, pos 1 is 8 pixels to right of that, pos 128 is 8 pixels below that
115
116
117
mp_obj_t lcd_draw_pixel_8(mp_obj_t mp_pos, mp_obj_t mp_val) {
    int pos = mp_obj_get_int(mp_pos);
    int val = mp_obj_get_int(mp_val);
118
119
120
121
122
123
    int page = pos / 128;
    int offset = pos - (page * 128);
    lcd_out(LCD_INSTR, 0xb0 | page); // page address set
    lcd_out(LCD_INSTR, 0x10 | ((offset >> 4) & 0x0f)); // column address set upper
    lcd_out(LCD_INSTR, 0x00 | (offset & 0x0f)); // column address set lower
    lcd_out(LCD_DATA, val); // write data
124
    return mp_const_none;
125
126
}

127
128
129
#define LCD_BUF_W (16)
#define LCD_BUF_H (4)

130
char lcd_char_buffer[LCD_BUF_W * LCD_BUF_H];
131
132
133
134
int lcd_line;
int lcd_column;
int lcd_next_line;

135
136
137
138
#define LCD_PIX_BUF_SIZE (128 * 32 / 8)
byte lcd_pix_buf[LCD_PIX_BUF_SIZE];
byte lcd_pix_buf2[LCD_PIX_BUF_SIZE];

139
mp_obj_t lcd_pix_clear(void) {
140
141
    memset(lcd_pix_buf, 0, LCD_PIX_BUF_SIZE);
    memset(lcd_pix_buf2, 0, LCD_PIX_BUF_SIZE);
142
    return mp_const_none;
143
144
}

145
146
147
mp_obj_t lcd_pix_get(mp_obj_t mp_x, mp_obj_t mp_y) {
    int x = mp_obj_get_int(mp_x);
    int y = mp_obj_get_int(mp_y);
148
149
150
    if (0 <= x && x <= 127 && 0 <= y && y <= 31) {
        uint byte_pos = x + 128 * ((uint)y >> 3);
        if (lcd_pix_buf[byte_pos] & (1 << (y & 7))) {
151
            return mp_obj_new_int(1);
152
153
        }
    }
154
    return mp_obj_new_int(0);
155
156
}

157
158
159
mp_obj_t lcd_pix_set(mp_obj_t mp_x, mp_obj_t mp_y) {
    int x = mp_obj_get_int(mp_x);
    int y = mp_obj_get_int(mp_y);
160
161
162
163
    if (0 <= x && x <= 127 && 0 <= y && y <= 31) {
        uint byte_pos = x + 128 * ((uint)y >> 3);
        lcd_pix_buf2[byte_pos] |= 1 << (y & 7);
    }
164
    return mp_const_none;
165
166
}

167
168
169
mp_obj_t lcd_pix_reset(mp_obj_t mp_x, mp_obj_t mp_y) {
    int x = mp_obj_get_int(mp_x);
    int y = mp_obj_get_int(mp_y);
170
171
172
173
    if (0 <= x && x <= 127 && 0 <= y && y <= 31) {
        uint byte_pos = x + 128 * ((uint)y >> 3);
        lcd_pix_buf2[byte_pos] &= ~(1 << (y & 7));
    }
174
    return mp_const_none;
175
176
}

177
mp_obj_t lcd_pix_show(void) {
178
179
180
181
182
183
184
185
186
    memcpy(lcd_pix_buf, lcd_pix_buf2, LCD_PIX_BUF_SIZE);
    for (uint page = 0; page < 4; page++) {
        lcd_out(LCD_INSTR, 0xb0 | page); // page address set
        lcd_out(LCD_INSTR, 0x10); // column address set upper; 0
        lcd_out(LCD_INSTR, 0x00); // column address set lower; 0
        for (uint i = 0; i < 128; i++) {
            lcd_out(LCD_DATA, lcd_pix_buf[i + 128 * page]);
        }
    }
187
    return mp_const_none;
188
189
}

190
mp_obj_t lcd_print(mp_obj_t text) {
191
192
193
    uint len;
    const byte *data = mp_obj_str_get_data(text, &len);
    lcd_print_strn((const char*)data, len);
194
    return mp_const_none;
195
196
}

197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
mp_obj_t lcd_light(mp_obj_t value) {
#if defined(PYB_LCD_BL_PORT)
    if (rt_is_true(value)) {
        PYB_LCD_BL_PORT->BSRRL = PYB_LCD_BL_PIN; // set pin high to turn backlight on
    } else {
        PYB_LCD_BL_PORT->BSRRH = PYB_LCD_BL_PIN; // set pin low to turn backlight off
    }
#endif
    return mp_const_none;
}

static mp_obj_t mp_lcd = MP_OBJ_NULL;

static mp_obj_t pyb_lcd_init(void) {
    if (mp_lcd != MP_OBJ_NULL) {
        // already init'd
        return mp_lcd;
    }

216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
    // set the outputs high
    PYB_LCD_PORT->BSRRL = PYB_LCD_CS1_PIN;
    PYB_LCD_PORT->BSRRL = PYB_LCD_RST_PIN;
    PYB_LCD_PORT->BSRRL = PYB_LCD_A0_PIN;
    PYB_LCD_PORT->BSRRL = PYB_LCD_SCL_PIN;
    PYB_LCD_PORT->BSRRL = PYB_LCD_SI_PIN;

    // make them push/pull outputs
    GPIO_InitTypeDef GPIO_InitStructure;
    GPIO_InitStructure.GPIO_Pin = PYB_LCD_CS1_PIN | PYB_LCD_RST_PIN | PYB_LCD_A0_PIN | PYB_LCD_SCL_PIN | PYB_LCD_SI_PIN;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
    GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
    GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
    GPIO_Init(PYB_LCD_PORT, &GPIO_InitStructure);

232
233
234
235
236
237
238
239
240
241
242
#if defined(PYB_LCD_BL_PORT)
    // backlight drive pin, starts low (off)
    PYB_LCD_BL_PORT->BSRRH = PYB_LCD_BL_PIN;
    GPIO_InitStructure.GPIO_Pin = PYB_LCD_BL_PIN;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
    GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
    GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
    GPIO_Init(PYB_LCD_BL_PORT, &GPIO_InitStructure);
#endif

243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
    // init the LCD
    sys_tick_delay_ms(1); // wait a bit
    PYB_LCD_PORT->BSRRH = PYB_LCD_RST_PIN; // RST=0; reset
    sys_tick_delay_ms(1); // wait for reset; 2us min
    PYB_LCD_PORT->BSRRL = PYB_LCD_RST_PIN; // RST=1; enable
    sys_tick_delay_ms(1); // wait for reset; 2us min
    lcd_out(LCD_INSTR, 0xa0); // ADC select, normal
    lcd_out(LCD_INSTR, 0xc8); // common output mode select, reverse
    lcd_out(LCD_INSTR, 0xa2); // LCD bias set, 1/9 bias
    lcd_out(LCD_INSTR, 0x2f); // power control set, 0b111=(booster on, vreg on, vfollow on)
    lcd_out(LCD_INSTR, 0x21); // v0 voltage regulator internal resistor ratio set, 0b001=small
    lcd_out(LCD_INSTR, 0x81); // electronic volume mode set
    lcd_out(LCD_INSTR, 0x34); // electronic volume register set, 0b110100
    lcd_out(LCD_INSTR, 0x40); // display start line set, 0
    lcd_out(LCD_INSTR, 0xaf); // LCD display, on

    // clear display
    for (int page = 0; page < 4; page++) {
        lcd_out(LCD_INSTR, 0xb0 | page); // page address set
        lcd_out(LCD_INSTR, 0x10); // column address set upper
        lcd_out(LCD_INSTR, 0x00); // column address set lower
        for (int i = 0; i < 128; i++) {
            lcd_out(LCD_DATA, 0x00);
        }
    }

    for (int i = 0; i < LCD_BUF_H * LCD_BUF_W; i++) {
270
        lcd_char_buffer[i] = ' ';
271
272
273
274
    }
    lcd_line = 0;
    lcd_column = 0;
    lcd_next_line = 0;
275

276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
    // Micro Python interface
    mp_obj_t o = mp_obj_new_type("LCD", mp_const_empty_tuple, mp_obj_new_dict(0));
    rt_store_attr(o, qstr_from_str("lcd8"), rt_make_function_n(2, lcd_draw_pixel_8));
    rt_store_attr(o, qstr_from_str("clear"), rt_make_function_n(0, lcd_pix_clear));
    rt_store_attr(o, qstr_from_str("get"), rt_make_function_n(2, lcd_pix_get));
    rt_store_attr(o, qstr_from_str("set"), rt_make_function_n(2, lcd_pix_set));
    rt_store_attr(o, qstr_from_str("reset"), rt_make_function_n(2, lcd_pix_reset));
    rt_store_attr(o, qstr_from_str("show"), rt_make_function_n(0, lcd_pix_show));
    rt_store_attr(o, qstr_from_str("text"), rt_make_function_n(1, lcd_print));
    rt_store_attr(o, qstr_from_str("light"), rt_make_function_n(1, lcd_light));
    mp_lcd = o;
    return o;
}

static MP_DEFINE_CONST_FUN_OBJ_0(pyb_lcd_init_obj, pyb_lcd_init);

void lcd_init(void) {
    mp_lcd = MP_OBJ_NULL;
    rt_store_name(qstr_from_str("LCD"), (mp_obj_t)&pyb_lcd_init_obj);
295
296
}

297
298
299
300
void lcd_print_str(const char *str) {
    lcd_print_strn(str, strlen(str));
}

301
302
303
304
305
306
307
308
309
310
311
312
void lcd_print_strn(const char *str, unsigned int len) {
    int redraw_min = lcd_line * LCD_BUF_W + lcd_column;
    int redraw_max = redraw_min;
    int did_new_line = 0;
    for (; len > 0; len--, str++) {
        // move to next line if needed
        if (lcd_next_line) {
            if (lcd_line + 1 < LCD_BUF_H) {
                lcd_line += 1;
            } else {
                lcd_line = LCD_BUF_H - 1;
                for (int i = 0; i < LCD_BUF_W * (LCD_BUF_H - 1); i++) {
313
                    lcd_char_buffer[i] = lcd_char_buffer[i + LCD_BUF_W];
314
315
                }
                for (int i = 0; i < LCD_BUF_W; i++) {
316
                    lcd_char_buffer[LCD_BUF_W * (LCD_BUF_H - 1) + i] = ' ';
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
                }
                redraw_min = 0;
                redraw_max = LCD_BUF_W * LCD_BUF_H;
            }
            lcd_next_line = 0;
            lcd_column = 0;
            did_new_line = 1;
        }
        if (*str == '\n') {
            lcd_next_line = 1;
        } else if (lcd_column >= LCD_BUF_W) {
            lcd_next_line = 1;
            str -= 1;
            len += 1;
        } else {
332
            lcd_char_buffer[lcd_line * LCD_BUF_W + lcd_column] = *str;
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
            lcd_column += 1;
            int max = lcd_line * LCD_BUF_W + lcd_column;
            if (max > redraw_max) {
                redraw_max = max;
            }
        }
    }

    int last_page = -1;
    for (int i = redraw_min; i < redraw_max; i++) {
        int page = i / LCD_BUF_W;
        if (page != last_page) {
            int offset = 8 * (i - (page * LCD_BUF_W));
            lcd_out(LCD_INSTR, 0xb0 | page); // page address set
            lcd_out(LCD_INSTR, 0x10 | ((offset >> 4) & 0x0f)); // column address set upper
            lcd_out(LCD_INSTR, 0x00 | (offset & 0x0f)); // column address set lower
            last_page = page;
        }
351
        int chr = lcd_char_buffer[i];
352
353
354
355
        if (chr < 32 || chr > 126) {
            chr = 127;
        }
        const uint8_t *chr_data = &font_petme128_8x8[(chr - 32) * 8];
356
357
        for (int j = 0; j < 8; j++) {
            lcd_out(LCD_DATA, chr_data[j]);
358
359
360
361
362
363
364
        }
    }

    if (did_new_line) {
        sys_tick_delay_ms(200);
    }
}