servo.c 6.43 KB
Newer Older
Damien George's avatar
Damien George committed
1 2 3 4
#include <stdio.h>

#include "stm32f4xx_hal.h"

5
#include "nlr.h"
Damien George's avatar
Damien George committed
6 7 8 9 10 11 12 13 14 15 16
#include "misc.h"
#include "mpconfig.h"
#include "qstr.h"
#include "obj.h"
#include "servo.h"

// this servo driver uses hardware PWM to drive servos on PA0, PA1, PA2, PA3 = X1, X2, X3, X4
// TIM2 and TIM5 have CH1, CH2, CH3, CH4 on PA0-PA3 respectively
// they are both 32-bit counters with 16-bit prescaler
// we use TIM2

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
#define PYB_SERVO_NUM (4)

typedef struct _pyb_servo_obj_t {
    mp_obj_base_t base;
    uint16_t servo_id;
    uint16_t time_left;
    int16_t pulse_accum;
    uint16_t pulse_cur;
    uint16_t pulse_dest;
} pyb_servo_obj_t;

STATIC const mp_obj_type_t servo_obj_type;

STATIC pyb_servo_obj_t pyb_servo_obj[PYB_SERVO_NUM];

32
TIM_HandleTypeDef TIM2_Handle;
Damien George's avatar
Damien George committed
33 34 35 36 37

void servo_init(void) {
    // TIM2 clock enable
    __TIM2_CLK_ENABLE();

38 39 40 41
    // set up and enable interrupt
    HAL_NVIC_SetPriority(TIM2_IRQn, 6, 0);
    HAL_NVIC_EnableIRQ(TIM2_IRQn);

Damien George's avatar
Damien George committed
42
    // PWM clock configuration
43 44 45 46 47 48
    TIM2_Handle.Instance = TIM2;
    TIM2_Handle.Init.Period = 2000; // timer cycles at 50Hz
    TIM2_Handle.Init.Prescaler = ((SystemCoreClock / 2) / 100000) - 1; // timer runs at 100kHz
    TIM2_Handle.Init.ClockDivision = 0;
    TIM2_Handle.Init.CounterMode = TIM_COUNTERMODE_UP;
    HAL_TIM_PWM_Init(&TIM2_Handle);
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83

    // reset servo objects
    for (int i = 0; i < PYB_SERVO_NUM; i++) {
        pyb_servo_obj[i].base.type = &servo_obj_type;
        pyb_servo_obj[i].servo_id = i + 1;
        pyb_servo_obj[i].time_left = 0;
        pyb_servo_obj[i].pulse_cur = 150; // units of 10us
        pyb_servo_obj[i].pulse_dest = 0;
    }
}

void servo_timer_irq_callback(void) {
    bool need_it = false;
    for (int i = 0; i < PYB_SERVO_NUM; i++) {
        pyb_servo_obj_t *s = &pyb_servo_obj[i];
        if (s->pulse_cur != s->pulse_dest) {
            if (s->time_left <= 1) {
                s->pulse_cur = s->pulse_dest;
                s->time_left = 0;
            } else {
                s->pulse_accum += s->pulse_dest - s->pulse_cur;
                s->pulse_cur += s->pulse_accum / s->time_left;
                s->pulse_accum %= s->time_left;
                s->time_left--;
                need_it = true;
            }
            switch (s->servo_id) {
                case 1: TIM2->CCR1 = s->pulse_cur; break;
                case 2: TIM2->CCR2 = s->pulse_cur; break;
                case 3: TIM2->CCR3 = s->pulse_cur; break;
                case 4: TIM2->CCR4 = s->pulse_cur; break;
            }
        }
    }
    if (need_it) {
84
        __HAL_TIM_ENABLE_IT(&TIM2_Handle, TIM_IT_UPDATE);
85
    } else {
86
        __HAL_TIM_DISABLE_IT(&TIM2_Handle, TIM_IT_UPDATE);
87
    }
Damien George's avatar
Damien George committed
88 89
}

90
STATIC void servo_init_channel(pyb_servo_obj_t *s) {
Damien George's avatar
Damien George committed
91 92
    uint32_t pin;
    uint32_t channel;
93
    switch (s->servo_id) {
Damien George's avatar
Damien George committed
94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112
        case 1: pin = GPIO_PIN_0; channel = TIM_CHANNEL_1; break;
        case 2: pin = GPIO_PIN_1; channel = TIM_CHANNEL_2; break;
        case 3: pin = GPIO_PIN_2; channel = TIM_CHANNEL_3; break;
        case 4: pin = GPIO_PIN_3; channel = TIM_CHANNEL_4; break;
        default: return;
    }

    // GPIO configuration
    GPIO_InitTypeDef GPIO_InitStructure;
    GPIO_InitStructure.Pin = pin;
    GPIO_InitStructure.Mode = GPIO_MODE_AF_PP;
    GPIO_InitStructure.Speed = GPIO_SPEED_FAST;
    GPIO_InitStructure.Pull = GPIO_NOPULL;
    GPIO_InitStructure.Alternate = GPIO_AF1_TIM2;
    HAL_GPIO_Init(GPIOA, &GPIO_InitStructure);

    // PWM mode configuration
    TIM_OC_InitTypeDef oc_init;
    oc_init.OCMode = TIM_OCMODE_PWM1;
113
    oc_init.Pulse = s->pulse_cur; // units of 10us
Damien George's avatar
Damien George committed
114 115
    oc_init.OCPolarity = TIM_OCPOLARITY_HIGH;
    oc_init.OCFastMode = TIM_OCFAST_DISABLE;
116
    HAL_TIM_PWM_ConfigChannel(&TIM2_Handle, &oc_init, channel);
Damien George's avatar
Damien George committed
117 118

    // start PWM
119
    HAL_TIM_PWM_Start(&TIM2_Handle, channel);
Damien George's avatar
Damien George committed
120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152
}

/******************************************************************************/
// Micro Python bindings

STATIC mp_obj_t pyb_servo_set(mp_obj_t port, mp_obj_t value) {
    int p = mp_obj_get_int(port);
    int v = mp_obj_get_int(value);
    if (v < 50) { v = 50; }
    if (v > 250) { v = 250; }
    switch (p) {
        case 1: TIM2->CCR1 = v; break;
        case 2: TIM2->CCR2 = v; break;
        case 3: TIM2->CCR3 = v; break;
        case 4: TIM2->CCR4 = v; break;
    }
    return mp_const_none;
}

MP_DEFINE_CONST_FUN_OBJ_2(pyb_servo_set_obj, pyb_servo_set);

STATIC mp_obj_t pyb_pwm_set(mp_obj_t period, mp_obj_t pulse) {
    int pe = mp_obj_get_int(period);
    int pu = mp_obj_get_int(pulse);
    TIM2->ARR = pe;
    TIM2->CCR3 = pu;
    return mp_const_none;
}

MP_DEFINE_CONST_FUN_OBJ_2(pyb_pwm_set_obj, pyb_pwm_set);

STATIC void servo_obj_print(void (*print)(void *env, const char *fmt, ...), void *env, mp_obj_t self_in, mp_print_kind_t kind) {
    pyb_servo_obj_t *self = self_in;
153
    print(env, "<Servo %lu at %lu>", self->servo_id, self->pulse_cur);
Damien George's avatar
Damien George committed
154 155
}

156 157 158 159 160 161
STATIC mp_obj_t servo_obj_angle(uint n_args, const mp_obj_t *args) {
    pyb_servo_obj_t *self = args[0];
    if (n_args == 1) {
        // get angle
        return mp_obj_new_int((self->pulse_cur - 152) * 90 / 85);
    } else {
Damien George's avatar
Damien George committed
162
#if MICROPY_ENABLE_FLOAT
163
        machine_int_t v = 152 + 85.0 * mp_obj_get_float(args[1]) / 90.0;
Damien George's avatar
Damien George committed
164
#else
165
        machine_int_t v = 152 + 85 * mp_obj_get_int(args[1]) / 90;
Damien George's avatar
Damien George committed
166
#endif
167 168 169 170 171 172 173 174 175 176 177 178 179
        if (v < 65) { v = 65; }
        if (v > 210) { v = 210; }
        self->pulse_dest = v;
        if (n_args == 2) {
            // set angle immediately
            self->time_left = 0;
        } else {
            // set angle over a given time (given in milli seconds)
            self->time_left = mp_obj_get_int(args[2]) / 20;
            self->pulse_accum = 0;
        }
        servo_timer_irq_callback();
        return mp_const_none;
Damien George's avatar
Damien George committed
180 181 182
    }
}

183
STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(servo_obj_angle_obj, 1, 3, servo_obj_angle);
Damien George's avatar
Damien George committed
184 185 186 187 188 189 190 191 192 193 194 195 196

STATIC const mp_method_t servo_methods[] = {
    { "angle", &servo_obj_angle_obj },
    { NULL, NULL },
};

STATIC const mp_obj_type_t servo_obj_type = {
    { &mp_type_type },
    .name = MP_QSTR_Servo,
    .print = servo_obj_print,
    .methods = servo_methods,
};

197 198 199 200 201 202 203 204 205 206 207
STATIC mp_obj_t pyb_Servo(mp_obj_t servo_id_o) {
    machine_int_t servo_id = mp_obj_get_int(servo_id_o) - 1;
    if (0 <= servo_id && servo_id < PYB_SERVO_NUM) {
        pyb_servo_obj_t *s = &pyb_servo_obj[servo_id];
        s->pulse_dest = s->pulse_cur;
        s->time_left = 0;
        servo_init_channel(s);
        return s;
    } else {
        nlr_jump(mp_obj_new_exception_msg_varg(&mp_type_ValueError, "Servo %d does not exist", servo_id));
    }
Damien George's avatar
Damien George committed
208 209 210
}

MP_DEFINE_CONST_FUN_OBJ_1(pyb_Servo_obj, pyb_Servo);