main.c 34.9 KB
Newer Older
1
#include <stdio.h>
Damien's avatar
Damien committed
2
3
#include <stm32f4xx.h>
#include <stm32f4xx_rcc.h>
4
#include <stm32f4xx_gpio.h>
5
#include <stm32f4xx_tim.h>
Damien's avatar
Damien committed
6
#include <stm32f4xx_pwr.h>
7
#include <stm32f4xx_rtc.h>
8
#include <stm32f4xx_usart.h>
9
#include <stm32f4xx_rng.h>
10
#include <stm_misc.h>
Damien's avatar
Damien committed
11
12
#include "std.h"

13
#include "misc.h"
Damien's avatar
Damien committed
14
15
#include "mpyconfig.h"
#include "gc.h"
16
#include "systick.h"
17
#include "led.h"
18
#include "lcd.h"
19
#include "storage.h"
20
#include "mma.h"
21
#include "usart.h"
Damien's avatar
Damien committed
22
#include "usb.h"
23
#include "ff.h"
24
#include "timer.h"
25
#include "audio.h"
26
27
28
#include "pybwlan.h"

int errno;
Damien's avatar
Damien committed
29

Damien's avatar
Damien committed
30
31
extern uint32_t _heap_start;

32
33
static FATFS fatfs0;

34
35
36
37
38
39
40
41
42
43
44
45
void flash_error(int n) {
    for (int i = 0; i < n; i++) {
        led_state(PYB_LED_R1, 1);
        led_state(PYB_LED_R2, 0);
        sys_tick_delay_ms(250);
        led_state(PYB_LED_R1, 0);
        led_state(PYB_LED_R2, 1);
        sys_tick_delay_ms(250);
    }
    led_state(PYB_LED_R2, 0);
}

46
static void impl02_c_version(void) {
Damien's avatar
Damien committed
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
    int x = 0;
    while (x < 400) {
        int y = 0;
        while (y < 400) {
            volatile int z = 0;
            while (z < 400) {
                z = z + 1;
            }
            y = y + 1;
        }
        x = x + 1;
    }
}

#define PYB_USRSW_PORT (GPIOA)
62
#define PYB_USRSW_PIN (GPIO_Pin_13)
Damien's avatar
Damien committed
63

64
void sw_init(void) {
Damien's avatar
Damien committed
65
    // make it an input with pull-up
66
67
68
69
70
    GPIO_InitTypeDef GPIO_InitStructure;
    GPIO_InitStructure.GPIO_Pin = PYB_USRSW_PIN;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
    GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
    GPIO_Init(PYB_USRSW_PORT, &GPIO_InitStructure);
Damien's avatar
Damien committed
71
72
}

73
int sw_get(void) {
74
    if (PYB_USRSW_PORT->IDR & PYB_USRSW_PIN) {
Damien's avatar
Damien committed
75
76
77
78
79
80
81
82
83
84
85
86
        // pulled high, so switch is not pressed
        return 0;
    } else {
        // pulled low, so switch is pressed
        return 1;
    }
}

void __fatal_error(const char *msg) {
    lcd_print_strn("\nFATAL ERROR:\n", 14);
    lcd_print_strn(msg, strlen(msg));
    for (;;) {
87
        flash_error(1);
Damien's avatar
Damien committed
88
89
90
    }
}

91
#include "nlr.h"
Damien's avatar
Damien committed
92
93
#include "misc.h"
#include "lexer.h"
94
#include "lexerstm.h"
Damien's avatar
Damien committed
95
96
97
98
#include "mpyconfig.h"
#include "parse.h"
#include "compile.h"
#include "runtime.h"
99
100
#include "repl.h"

101
102
103
static qstr pyb_config_source_dir = 0;
static qstr pyb_config_main = 0;

104
py_obj_t pyb_source_dir(py_obj_t source_dir) {
Damien's avatar
Damien committed
105
    pyb_config_source_dir = py_obj_get_qstr(source_dir);
106
107
108
109
    return py_const_none;
}

py_obj_t pyb_main(py_obj_t main) {
Damien's avatar
Damien committed
110
    pyb_config_main = py_obj_get_qstr(main);
111
112
113
114
    return py_const_none;
}

// sync all file systems
115
py_obj_t pyb_sync(void) {
116
    storage_flush();
117
118
    return py_const_none;
}
Damien's avatar
Damien committed
119
120

py_obj_t pyb_delay(py_obj_t count) {
Damien's avatar
Damien committed
121
    sys_tick_delay_ms(py_obj_get_int(count));
Damien's avatar
Damien committed
122
123
124
125
    return py_const_none;
}

py_obj_t pyb_led(py_obj_t state) {
126
    led_state(PYB_LED_G1, rt_is_true(state));
Damien's avatar
Damien committed
127
128
129
    return state;
}

130
py_obj_t pyb_sw(void) {
Damien's avatar
Damien committed
131
132
133
134
135
136
137
    if (sw_get()) {
        return py_const_true;
    } else {
        return py_const_false;
    }
}

138
/*
139
140
141
142
143
144
void g(uint i) {
    printf("g:%d\n", i);
    if (i & 1) {
        nlr_jump((void*)(42 + i));
    }
}
145
void f(void) {
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
    nlr_buf_t nlr;
    int i;
    for (i = 0; i < 4; i++) {
        printf("f:loop:%d:%p\n", i, &nlr);
        if (nlr_push(&nlr) == 0) {
            // normal
            //printf("a:%p:%p %p %p %u\n", &nlr, nlr.ip, nlr.sp, nlr.prev, nlr.ret_val);
            g(i);
            printf("f:lp:%d:nrm\n", i);
            nlr_pop();
        } else {
            // nlr
            //printf("b:%p:%p %p %p %u\n", &nlr, nlr.ip, nlr.sp, nlr.prev, nlr.ret_val);
            printf("f:lp:%d:nlr:%d\n", i, (int)nlr.ret_val);
        }
    }
}
163
void nlr_test(void) {
164
165
    f(1);
}
166
167
*/

168
void fatality(void) {
169
170
171
172
173
174
    led_state(PYB_LED_R1, 1);
    led_state(PYB_LED_G1, 1);
    led_state(PYB_LED_R2, 1);
    led_state(PYB_LED_G2, 1);
}

175
static const char fresh_boot_py[] =
176
177
178
179
180
181
182
183
184
185
186
187
"# boot.py -- run on boot-up\n"
"# can run arbitrary Python, but best to keep it minimal\n"
"\n"
"pyb.source_dir('/src')\n"
"pyb.main('main.py')\n"
"#pyb.usb_usr('VCP')\n"
"#pyb.usb_msd(True, 'dual partition')\n"
"#pyb.flush_cache(False)\n"
"#pyb.error_log('error.txt')\n"
;

// get lots of info about the board
188
static py_obj_t pyb_info(void) {
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
    // get and print clock speeds
    // SYSCLK=168MHz, HCLK=168MHz, PCLK1=42MHz, PCLK2=84MHz
    {
        RCC_ClocksTypeDef rcc_clocks;
        RCC_GetClocksFreq(&rcc_clocks);
        printf("S=%lu\nH=%lu\nP1=%lu\nP2=%lu\n", rcc_clocks.SYSCLK_Frequency, rcc_clocks.HCLK_Frequency, rcc_clocks.PCLK1_Frequency, rcc_clocks.PCLK2_Frequency);
    }

    // to print info about memory
    {
        extern void *_sidata;
        extern void *_sdata;
        extern void *_edata;
        extern void *_sbss;
        extern void *_ebss;
        extern void *_estack;
        extern void *_etext;
        printf("_sidata=%p\n", &_sidata);
        printf("_sdata=%p\n", &_sdata);
        printf("_edata=%p\n", &_edata);
        printf("_sbss=%p\n", &_sbss);
        printf("_ebss=%p\n", &_ebss);
        printf("_estack=%p\n", &_estack);
        printf("_etext=%p\n", &_etext);
        printf("_heap_start=%p\n", &_heap_start);
    }

216
217
218
219
220
221
222
223
224
225
    // GC info
    {
        gc_info_t info;
        gc_info(&info);
        printf("GC:\n");
        printf("  %lu total\n", info.total);
        printf("  %lu : %lu\n", info.used, info.free);
        printf("  1=%lu 2=%lu m=%lu\n", info.num_1block, info.num_2block, info.max_block);
    }

226
227
228
229
230
    // free space on flash
    {
        DWORD nclst;
        FATFS *fatfs;
        f_getfree("0:", &nclst, &fatfs);
231
        printf("LFS free: %u bytes\n", (uint)(nclst * fatfs->csize * 512));
232
    }
233
234

    return py_const_none;
235
236
}

237
py_obj_t pyb_usart_send(py_obj_t data) {
Damien's avatar
Damien committed
238
    usart_tx_char(py_obj_get_int(data));
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
    return py_const_none;
}

py_obj_t pyb_usart_receive(void) {
    return py_obj_new_int(usart_rx_char());
}

py_obj_t pyb_usart_status(void) {
    if (usart_rx_any()) {
        return py_const_true;
    } else {
        return py_const_false;
    }
}

Damien's avatar
Damien committed
254
255
256
257
258
259
260
261
262
263
264
265
char *strdup(const char *str) {
    uint32_t len = strlen(str);
    char *s2 = m_new(char, len + 1);
    memcpy(s2, str, len);
    s2[len] = 0;
    return s2;
}

#define READLINE_HIST_SIZE (8)

static const char *readline_hist[READLINE_HIST_SIZE] = {NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL};

266
267
268
269
270
void stdout_tx_str(const char *str) {
    usart_tx_str(str);
    usb_vcp_send_str(str);
}

271
int readline(vstr_t *line, const char *prompt) {
272
    stdout_tx_str(prompt);
273
    int len = vstr_len(line);
Damien's avatar
Damien committed
274
275
    int escape = 0;
    int hist_num = 0;
276
    for (;;) {
277
278
279
280
281
282
283
284
285
        char c;
        for (;;) {
            if (usb_vcp_rx_any() != 0) {
                c = usb_vcp_rx_get();
                break;
            } else if (usart_rx_any()) {
                c = usart_rx_char();
                break;
            }
Damien's avatar
Damien committed
286
            sys_tick_delay_ms(1);
287
        }
Damien's avatar
Damien committed
288
289
290
291
        if (escape == 0) {
            if (c == 4 && vstr_len(line) == len) {
                return 0;
            } else if (c == '\r') {
292
                stdout_tx_str("\r\n");
Damien's avatar
Damien committed
293
294
295
296
297
298
299
300
301
302
                for (int i = READLINE_HIST_SIZE - 1; i > 0; i--) {
                    readline_hist[i] = readline_hist[i - 1];
                }
                readline_hist[0] = strdup(vstr_str(line));
                return 1;
            } else if (c == 27) {
                escape = true;
            } else if (c == 127) {
                if (vstr_len(line) > len) {
                    vstr_cut_tail(line, 1);
303
                    stdout_tx_str("\b \b");
Damien's avatar
Damien committed
304
305
306
                }
            } else if (32 <= c && c <= 126) {
                vstr_add_char(line, c);
307
                stdout_tx_str(line->buf + line->len - 1);
308
            }
Damien's avatar
Damien committed
309
310
311
312
313
314
315
316
317
318
319
320
321
        } else if (escape == 1) {
            if (c == '[') {
                escape = 2;
            } else {
                escape = 0;
            }
        } else if (escape == 2) {
            escape = 0;
            if (c == 'A') {
                // up arrow
                if (hist_num < READLINE_HIST_SIZE && readline_hist[hist_num] != NULL) {
                    // erase line
                    for (int i = line->len - len; i > 0; i--) {
322
                        stdout_tx_str("\b \b");
Damien's avatar
Damien committed
323
324
325
326
327
                    }
                    // set line to history
                    line->len = len;
                    vstr_add_str(line, readline_hist[hist_num]);
                    // draw line
328
                    stdout_tx_str(readline_hist[hist_num]);
Damien's avatar
Damien committed
329
330
331
332
333
334
                    // increase hist num
                    hist_num += 1;
                }
            }
        } else {
            escape = 0;
335
        }
Damien's avatar
Damien committed
336
        sys_tick_delay_ms(10);
337
    }
338
339
}

340
void do_repl(void) {
341
342
    stdout_tx_str("Micro Python 0.5; STM32F405RG; PYBv2\r\n");
    stdout_tx_str("Type \"help\" for more information.\r\n");
343
344
345

    vstr_t line;
    vstr_init(&line);
346
347

    for (;;) {
348
349
350
        vstr_reset(&line);
        int ret = readline(&line, ">>> ");
        if (ret == 0) {
351
            // EOF
352
353
354
355
356
            break;
        }

        if (vstr_len(&line) == 0) {
            continue;
357
        }
358
359

        if (py_repl_is_compound_stmt(vstr_str(&line))) {
360
            for (;;) {
361
362
363
364
365
                vstr_add_char(&line, '\n');
                int len = vstr_len(&line);
                int ret = readline(&line, "... ");
                if (ret == 0 || vstr_len(&line) == len) {
                    // done entering compound statement
366
367
368
369
370
371
                    break;
                }
            }
        }

        py_lexer_str_buf_t sb;
372
        py_lexer_t *lex = py_lexer_new_from_str_len("<stdin>", vstr_str(&line), vstr_len(&line), false, &sb);
373
374
375
376
377
378
379
380
381
        py_parse_node_t pn = py_parse(lex, PY_PARSE_SINGLE_INPUT);
        py_lexer_free(lex);

        if (pn != PY_PARSE_NODE_NULL) {
            bool comp_ok = py_compile(pn, true);
            if (comp_ok) {
                py_obj_t module_fun = rt_make_function_from_id(1);
                if (module_fun != py_const_none) {
                    nlr_buf_t nlr;
382
                    uint32_t start = sys_tick_counter;
383
384
385
                    if (nlr_push(&nlr) == 0) {
                        rt_call_function_0(module_fun);
                        nlr_pop();
386
387
                        uint32_t ticks = sys_tick_counter - start; // TODO implement a function that does this properly
                        printf("(took %lu ms)\n", ticks);
388
389
390
391
392
393
394
395
396
                    } else {
                        // uncaught exception
                        py_obj_print((py_obj_t)nlr.ret_val);
                        printf("\n");
                    }
                }
            }
        }
    }
397

398
    stdout_tx_str("\r\n");
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
}

bool do_file(const char *filename) {
    py_lexer_file_buf_t fb;
    py_lexer_t *lex = py_lexer_new_from_file(filename, &fb);

    if (lex == NULL) {
        printf("could not open file '%s' for reading\n", filename);
        return false;
    }

    py_parse_node_t pn = py_parse(lex, PY_PARSE_FILE_INPUT);
    py_lexer_free(lex);

    if (pn == PY_PARSE_NODE_NULL) {
        return false;
    }

    bool comp_ok = py_compile(pn, false);
    if (!comp_ok) {
        return false;
    }

    py_obj_t module_fun = rt_make_function_from_id(1);
    if (module_fun == py_const_none) {
        return false;
    }

    nlr_buf_t nlr;
    if (nlr_push(&nlr) == 0) {
        rt_call_function_0(module_fun);
        nlr_pop();
        return true;
    } else {
        // uncaught exception
        py_obj_print((py_obj_t)nlr.ret_val);
        printf("\n");
        return false;
    }
438
439
}

440
441
442
443
444
445
#define RAM_START (0x20000000) // fixed for chip
#define HEAP_END  (0x2001c000) // tunable
#define RAM_END   (0x20020000) // fixed for chip

void gc_helper_get_regs_and_clean_stack(machine_uint_t *regs, machine_uint_t heap_end);

446
void gc_collect(void) {
447
    uint32_t start = sys_tick_counter;
Damien's avatar
Damien committed
448
    gc_collect_start();
449
450
451
452
    gc_collect_root((void**)RAM_START, (((uint32_t)&_heap_start) - RAM_START) / 4);
    machine_uint_t regs[10];
    gc_helper_get_regs_and_clean_stack(regs, HEAP_END);
    gc_collect_root((void**)HEAP_END, (RAM_END - HEAP_END) / 4); // will trace regs since they now live in this function on the stack
Damien's avatar
Damien committed
453
    gc_collect_end();
454
455
456
457
458
459
460
461
462
    uint32_t ticks = sys_tick_counter - start; // TODO implement a function that does this properly
    gc_info_t info;
    gc_info(&info);
    printf("GC@%lu %lums\n", start, ticks);
    printf(" %lu total\n", info.total);
    printf(" %lu : %lu\n", info.used, info.free);
    printf(" 1=%lu 2=%lu m=%lu\n", info.num_1block, info.num_2block, info.max_block);
}

463
py_obj_t pyb_gc(void) {
464
465
    gc_collect();
    return py_const_none;
Damien's avatar
Damien committed
466
467
}

468
469
470
471
472
473
474
475
476
// PWM
// TIM2 and TIM5 have CH1, CH2, CH3, CH4 on PA0-PA3 respectively
// they are both 32-bit counters
// 16-bit prescaler
// TIM2_CH3 also on PB10 (used below)
void servo_init(void) {
    // TIM2 clock enable
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);

477
478
479
    // for PB10
    /*
    // GPIOB Configuration: TIM2_CH3 (PB10)
480
481
482
483
484
485
486
487
488
489
    GPIO_InitTypeDef GPIO_InitStructure;
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
    GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
    GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
    GPIO_Init(GPIOB, &GPIO_InitStructure);

    // Connect TIM2 pins to AF1
    GPIO_PinAFConfig(GPIOB, GPIO_PinSource10, GPIO_AF_TIM2);
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
    */

    // for PA0, PA1, PA2, PA3
    {
        // GPIOA Configuration: TIM2_CH0, TIM2_CH1 (PA0, PA1)
        GPIO_InitTypeDef GPIO_InitStructure;
        GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_3;
        GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
        GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
        GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
        GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
        GPIO_Init(GPIOA, &GPIO_InitStructure);

        // Connect TIM2 pins to AF1
        GPIO_PinAFConfig(GPIOA, GPIO_PinSource0, GPIO_AF_TIM2);
        GPIO_PinAFConfig(GPIOA, GPIO_PinSource1, GPIO_AF_TIM2);
        GPIO_PinAFConfig(GPIOA, GPIO_PinSource2, GPIO_AF_TIM2);
        GPIO_PinAFConfig(GPIOA, GPIO_PinSource3, GPIO_AF_TIM2);
    }
509
510
511
512
513
514
515
516
517
518
519
520

    // Compute the prescaler value so TIM2 runs at 100kHz
    uint16_t PrescalerValue = (uint16_t) ((SystemCoreClock / 2) / 100000) - 1;

    // Time base configuration
    TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
    TIM_TimeBaseStructure.TIM_Period = 2000; // timer cycles at 50Hz
    TIM_TimeBaseStructure.TIM_Prescaler = PrescalerValue;
    TIM_TimeBaseStructure.TIM_ClockDivision = 0;
    TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
    TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);

521
    // PWM Mode configuration
522
523
524
525
526
    TIM_OCInitTypeDef TIM_OCInitStructure;
    TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;
    TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
    TIM_OCInitStructure.TIM_Pulse = 150; // units of 10us
    TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High;
527
528
529
530
    TIM_OC1Init(TIM2, &TIM_OCInitStructure); // channel 1
    TIM_OC2Init(TIM2, &TIM_OCInitStructure); // channel 2
    TIM_OC3Init(TIM2, &TIM_OCInitStructure); // channel 3
    TIM_OC4Init(TIM2, &TIM_OCInitStructure); // channel 4
531
532

    // ?
533
534
535
536
    TIM_OC1PreloadConfig(TIM2, TIM_OCPreload_Enable); // channel 1
    TIM_OC2PreloadConfig(TIM2, TIM_OCPreload_Enable); // channel 2
    TIM_OC3PreloadConfig(TIM2, TIM_OCPreload_Enable); // channel 3
    TIM_OC4PreloadConfig(TIM2, TIM_OCPreload_Enable); // channel 4
537
538
539
540
541
542
543
544

    // ?
    TIM_ARRPreloadConfig(TIM2, ENABLE);

    // TIM2 enable counter
    TIM_Cmd(TIM2, ENABLE);
}

545
546
py_obj_t pyb_servo_set(py_obj_t port, py_obj_t value) {
    int p = py_obj_get_int(port);
Damien's avatar
Damien committed
547
    int v = py_obj_get_int(value);
548
549
    if (v < 100) { v = 100; }
    if (v > 200) { v = 200; }
550
551
552
553
554
555
    switch (p) {
        case 1: TIM2->CCR1 = v; break;
        case 2: TIM2->CCR2 = v; break;
        case 3: TIM2->CCR3 = v; break;
        case 4: TIM2->CCR4 = v; break;
    }
556
557
558
    return py_const_none;
}

559
560
561
562
563
564
565
566
py_obj_t pyb_pwm_set(py_obj_t period, py_obj_t pulse) {
    int pe = py_obj_get_int(period);
    int pu = py_obj_get_int(pulse);
    TIM2->ARR = pe;
    TIM2->CCR3 = pu;
    return py_const_none;
}

Damien's avatar
Damien committed
567
568
#define MMA_ADDR (0x4c)

569
570
int mma_buf[12];

571
py_obj_t pyb_mma_read(void) {
572
573
574
575
576
577
    for (int i = 0; i <= 6; i += 3) {
        mma_buf[0 + i] = mma_buf[0 + i + 3];
        mma_buf[1 + i] = mma_buf[1 + i + 3];
        mma_buf[2 + i] = mma_buf[2 + i + 3];
    }

Damien's avatar
Damien committed
578
579
580
    mma_start(MMA_ADDR, 1);
    mma_send_byte(0);
    mma_restart(MMA_ADDR, 0);
581
    for (int i = 0; i <= 2; i++) {
Damien's avatar
Damien committed
582
583
584
585
        int v = mma_read_ack() & 0x3f;
        if (v & 0x20) {
            v |= ~0x1f;
        }
586
        mma_buf[9 + i] = v;
Damien's avatar
Damien committed
587
    }
588
589
590
591
592
593
594
595
    int jolt_info = mma_read_nack();

    py_obj_t data[4];
    data[0] = py_obj_new_int(jolt_info);
    data[1] = py_obj_new_int(mma_buf[2] + mma_buf[5] + mma_buf[8] + mma_buf[11]);
    data[2] = py_obj_new_int(mma_buf[1] + mma_buf[4] + mma_buf[7] + mma_buf[10]);
    data[3] = py_obj_new_int(mma_buf[0] + mma_buf[3] + mma_buf[6] + mma_buf[9]);

Damien's avatar
Damien committed
596
597
598
    return rt_build_tuple(4, data); // items in reverse order in data
}

599
py_obj_t pyb_hid_send_report(py_obj_t arg) {
Damien's avatar
Damien committed
600
    py_obj_t *items = py_obj_get_array_fixed_n(arg, 4);
601
    uint8_t data[4];
Damien's avatar
Damien committed
602
603
604
605
    data[0] = py_obj_get_int(items[0]);
    data[1] = py_obj_get_int(items[1]);
    data[2] = py_obj_get_int(items[2]);
    data[3] = py_obj_get_int(items[3]);
606
607
608
609
    usb_hid_send_report(data);
    return py_const_none;
}

610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
static void rtc_init(void) {
    /* Enable the PWR clock */
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);

    /* Allow access to RTC */
    PWR_BackupAccessCmd(ENABLE);

    /* Enable the LSE OSC */
    RCC_LSEConfig(RCC_LSE_ON);

    /* Wait till LSE is ready */
    while(RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET) {
    }

    /* Select the RTC Clock Source */
    RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);
    /* ck_spre(1Hz) = RTCCLK(LSE) /(uwAsynchPrediv + 1)*(uwSynchPrediv + 1)*/
    uint32_t uwSynchPrediv = 0xFF;
    uint32_t uwAsynchPrediv = 0x7F;

    /* Enable the RTC Clock */
    RCC_RTCCLKCmd(ENABLE);

    /* Wait for RTC APB registers synchronisation */
    RTC_WaitForSynchro();

    /* Configure the RTC data register and RTC prescaler */
    RTC_InitTypeDef RTC_InitStructure;
    RTC_InitStructure.RTC_AsynchPrediv = uwAsynchPrediv;
    RTC_InitStructure.RTC_SynchPrediv = uwSynchPrediv;
    RTC_InitStructure.RTC_HourFormat = RTC_HourFormat_24;
    RTC_Init(&RTC_InitStructure);

    // Set the date (BCD)
    RTC_DateTypeDef RTC_DateStructure;
    RTC_DateStructure.RTC_Year = 0x13;
    RTC_DateStructure.RTC_Month = RTC_Month_October;
    RTC_DateStructure.RTC_Date = 0x26;
    RTC_DateStructure.RTC_WeekDay = RTC_Weekday_Saturday;
    RTC_SetDate(RTC_Format_BCD, &RTC_DateStructure);

    // Set the time (BCD)
    RTC_TimeTypeDef RTC_TimeStructure;
    RTC_TimeStructure.RTC_H12     = RTC_H12_AM;
    RTC_TimeStructure.RTC_Hours   = 0x01;
    RTC_TimeStructure.RTC_Minutes = 0x53;
    RTC_TimeStructure.RTC_Seconds = 0x00;
    RTC_SetTime(RTC_Format_BCD, &RTC_TimeStructure);

    // Indicator for the RTC configuration
    //RTC_WriteBackupRegister(RTC_BKP_DR0, 0x32F2);
}

py_obj_t pyb_rtc_read(void) {
    RTC_TimeTypeDef RTC_TimeStructure;
    RTC_GetTime(RTC_Format_BIN, &RTC_TimeStructure);
    printf("%02d:%02d:%02d\n", RTC_TimeStructure.RTC_Hours, RTC_TimeStructure.RTC_Minutes, RTC_TimeStructure.RTC_Seconds);
    return py_const_none;
}

Damien's avatar
Damien committed
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
void file_obj_print(py_obj_t o) {
    FIL *fp;
    py_user_get_data(o, (machine_uint_t*)&fp, NULL);
    printf("<file %p>", fp);
}

py_obj_t file_obj_read(py_obj_t self, py_obj_t arg) {
    FIL *fp;
    py_user_get_data(self, (machine_uint_t*)&fp, NULL);
    int n = py_obj_get_int(arg);
    char *buf = m_new(char, n + 1);
    UINT n_out;
    f_read(fp, buf, n, &n_out);
    buf[n_out] = 0;
    return py_obj_new_str(qstr_from_str_take(buf));
}

py_obj_t file_obj_write(py_obj_t self, py_obj_t arg) {
    FIL *fp;
    py_user_get_data(self, (machine_uint_t*)&fp, NULL);
    const char *s = qstr_str(py_obj_get_qstr(arg));
    UINT n_out;
    FRESULT res = f_write(fp, s, strlen(s), &n_out);
    if (res != FR_OK) {
        printf("File error: could not write to file; error code %d\n", res);
    } else if (n_out != strlen(s)) {
        printf("File error: could not write all data to file; wrote %d / %d bytes\n", n_out, strlen(s));
    }
    return py_const_none;
}

py_obj_t file_obj_close(py_obj_t self) {
    FIL *fp;
    py_user_get_data(self, (machine_uint_t*)&fp, NULL);
    f_close(fp);
    return py_const_none;
}

// TODO gc hook to close the file if not already closed
const py_user_info_t file_obj_info = {
    "File",
    file_obj_print,
    {
        {"read", 1, file_obj_read},
        {"write", 1, file_obj_write},
        {"close", 0, file_obj_close},
        {NULL, 0, NULL},
    }
};

py_obj_t pyb_io_open(py_obj_t o_filename, py_obj_t o_mode) {
    const char *filename = qstr_str(py_obj_get_qstr(o_filename));
    const char *mode = qstr_str(py_obj_get_qstr(o_mode));
    FIL *fp = m_new(FIL, 1);
    if (mode[0] == 'r') {
        // open for reading
        FRESULT res = f_open(fp, filename, FA_READ);
        if (res != FR_OK) {
            printf("FileNotFoundError: [Errno 2] No such file or directory: '%s'\n", filename);
            return py_const_none;
        }
    } else if (mode[0] == 'w') {
        // open for writing, truncate the file first
        FRESULT res = f_open(fp, filename, FA_WRITE | FA_CREATE_ALWAYS);
        if (res != FR_OK) {
            printf("?FileError: could not create file: '%s'\n", filename);
            return py_const_none;
        }
    } else {
        printf("ValueError: invalid mode: '%s'\n", mode);
        return py_const_none;
    }
    return py_obj_new_user(&file_obj_info, (machine_uint_t)fp, 0);
}

745
746
747
748
py_obj_t pyb_rng_get(void) {
    return py_obj_new_int(RNG_GetRandomNumber() >> 16);
}

749
int main(void) {
750
    // TODO disable JTAG
Damien's avatar
Damien committed
751

752
753
754
755
756
757
    // set interrupt priority config to use all 4 bits for pre-empting
    NVIC_PriorityGroupConfig(NVIC_PriorityGroup_4);

    // enable the CCM RAM and the GPIO's
    RCC->AHB1ENR |= RCC_AHB1ENR_CCMDATARAMEN | RCC_AHB1ENR_GPIOAEN | RCC_AHB1ENR_GPIOBEN | RCC_AHB1ENR_GPIOCEN;

758
    // configure SDIO pins to be high to start with (apparently makes it more robust)
759
760
761
762
763
764
765
766
767
768
769
770
771
772
    {
      GPIO_InitTypeDef GPIO_InitStructure;
      GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | GPIO_Pin_11 | GPIO_Pin_12;
      GPIO_InitStructure.GPIO_Speed = GPIO_Speed_25MHz;
      GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
      GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
      GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
      GPIO_Init(GPIOC, &GPIO_InitStructure);

      // Configure PD.02 CMD line
      GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
      GPIO_Init(GPIOD, &GPIO_InitStructure);
    }

773
774
    // basic sub-system init
    sys_tick_init();
Damien's avatar
Damien committed
775
    led_init();
776
    rtc_init();
777
778
779
780
781

    // turn on LED to indicate bootup
    led_state(PYB_LED_G1, 1);

    // more sub-system init
Damien's avatar
Damien committed
782
    sw_init();
783
    storage_init();
784
785

    //usart_init(); disabled while wi-fi is enabled
Damien's avatar
Damien committed
786

787
788
    int first_soft_reset = true;

789
790
soft_reset:

Damien's avatar
Damien committed
791
    // GC init
792
    gc_init(&_heap_start, (void*)HEAP_END);
Damien's avatar
Damien committed
793

794
    // Micro Python init
795
796
    qstr_init();
    rt_init();
797

798
    // LCD init
799
    //lcd_init(); disabled while servos on PA0 PA1
800

801
802
803
    // servo
    servo_init();

804
805
806
    // audio
    audio_init();

807
808
809
    // timer
    timer_init();

810
811
812
813
814
815
    // RNG
    {
        RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_RNG, ENABLE);
        RNG_Cmd(ENABLE);
    }

816
    // add some functions to the python namespace
817
818
819
820
821
    {
        py_obj_t m = py_module_new();
        rt_store_attr(m, qstr_from_str_static("info"), rt_make_function_0(pyb_info));
        rt_store_attr(m, qstr_from_str_static("source_dir"), rt_make_function_1(pyb_source_dir));
        rt_store_attr(m, qstr_from_str_static("main"), rt_make_function_1(pyb_main));
822
        rt_store_attr(m, qstr_from_str_static("sync"), rt_make_function_0(pyb_sync));
823
824
825
826
        rt_store_attr(m, qstr_from_str_static("gc"), rt_make_function_0(pyb_gc));
        rt_store_attr(m, qstr_from_str_static("delay"), rt_make_function_1(pyb_delay));
        rt_store_attr(m, qstr_from_str_static("led"), rt_make_function_1(pyb_led));
        rt_store_attr(m, qstr_from_str_static("sw"), rt_make_function_0(pyb_sw));
827
        rt_store_attr(m, qstr_from_str_static("servo"), rt_make_function_2(pyb_servo_set));
828
        rt_store_attr(m, qstr_from_str_static("pwm"), rt_make_function_2(pyb_pwm_set));
Damien's avatar
Damien committed
829
        rt_store_attr(m, qstr_from_str_static("mma"), rt_make_function_0(pyb_mma_read));
830
        rt_store_attr(m, qstr_from_str_static("hid"), rt_make_function_1(pyb_hid_send_report));
831
        rt_store_attr(m, qstr_from_str_static("time"), rt_make_function_0(pyb_rtc_read));
832
833
834
        rt_store_attr(m, qstr_from_str_static("uout"), rt_make_function_1(pyb_usart_send));
        rt_store_attr(m, qstr_from_str_static("uin"), rt_make_function_0(pyb_usart_receive));
        rt_store_attr(m, qstr_from_str_static("ustat"), rt_make_function_0(pyb_usart_status));
835
        rt_store_attr(m, qstr_from_str_static("rng"), rt_make_function_0(pyb_rng_get));
836
        rt_store_name(qstr_from_str_static("pyb"), m);
Damien's avatar
Damien committed
837
838

        rt_store_name(qstr_from_str_static("open"), rt_make_function_2(pyb_io_open));
839
    }
840

841
842
    // print a message to the LCD
    lcd_print_str(" micro py board\n");
Damien's avatar
Damien committed
843

844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
    // local filesystem init
    {
        // try to mount the flash
        FRESULT res = f_mount(&fatfs0, "0:", 1);
        if (res == FR_OK) {
            // mount sucessful
        } else if (res == FR_NO_FILESYSTEM) {
            // no filesystem, so create a fresh one

            // LED on to indicate creation of LFS
            led_state(PYB_LED_R2, 1);
            uint32_t stc = sys_tick_counter;

            res = f_mkfs("0:", 0, 0);
            if (res == FR_OK) {
                // success creating fresh LFS
            } else {
                __fatal_error("could not create LFS");
            }

864
865
            // keep LED on for at least 200ms
            sys_tick_wait_at_least(stc, 200);
866
867
868
869
            led_state(PYB_LED_R2, 0);
        } else {
            __fatal_error("could not access LFS");
        }
Damien's avatar
Damien committed
870
871
    }

872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
    // make sure we have a /boot.py
    {
        FILINFO fno;
        FRESULT res = f_stat("0:/boot.py", &fno);
        if (res == FR_OK) {
            if (fno.fattrib & AM_DIR) {
                // exists as a directory
                // TODO handle this case
                // see http://elm-chan.org/fsw/ff/img/app2.c for a "rm -rf" implementation
            } else {
                // exists as a file, good!
            }
        } else {
            // doesn't exist, create fresh file

            // LED on to indicate creation of boot.py
            led_state(PYB_LED_R2, 1);
            uint32_t stc = sys_tick_counter;

            FIL fp;
            f_open(&fp, "0:/boot.py", FA_WRITE | FA_CREATE_ALWAYS);
            UINT n;
894
            f_write(&fp, fresh_boot_py, sizeof(fresh_boot_py) - 1 /* don't count null terminator */, &n);
895
896
897
            // TODO check we could write n bytes
            f_close(&fp);

898
899
            // keep LED on for at least 200ms
            sys_tick_wait_at_least(stc, 200);
900
901
902
903
            led_state(PYB_LED_R2, 0);
        }
    }

904
905
906
907
908
    // run /boot.py
    if (!do_file("0:/boot.py")) {
        flash_error(4);
    }

909
910
911
    // USB
    usb_init();

Damien's avatar
Damien committed
912
    // MMA
913
    if (first_soft_reset) {
Damien's avatar
Damien committed
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
        // init and reset address to zero
        mma_init();
        mma_start(MMA_ADDR, 1);
        mma_send_byte(0);
        mma_stop();

        /*
        // read and print all 11 registers
        mma_start(MMA_ADDR, 1);
        mma_send_byte(0);
        mma_restart(MMA_ADDR, 0);
        for (int i = 0; i <= 0xa; i++) {
            int data;
            if (i == 0xa) {
                data = mma_read_nack();
            } else {
                data = mma_read_ack();
            }
            printf(" %02x", data);
        }
        printf("\n");
        */

        // put into active mode
        mma_start(MMA_ADDR, 1);
        mma_send_byte(7); // mode
        mma_send_byte(1); // active mode
        mma_stop();

        /*
        // infinite loop to read values
        for (;;) {
            sys_tick_delay_ms(500);

            mma_start(MMA_ADDR, 1);
            mma_send_byte(0);
            mma_restart(MMA_ADDR, 0);
            for (int i = 0; i <= 3; i++) {
                int data;
                if (i == 3) {
                    data = mma_read_nack();
                    printf(" %02x\n", data);
                } else {
                    data = mma_read_ack() & 0x3f;
                    if (data & 0x20) {
                        data |= ~0x1f;
                    }
                    printf(" % 2d", data);
                }
            }
        }
        */
    }

968
969
    // turn boot-up LED off
    led_state(PYB_LED_G1, 0);
970

971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
    // run main script
    {
        vstr_t *vstr = vstr_new();
        vstr_add_str(vstr, "0:/");
        if (pyb_config_source_dir == 0) {
            vstr_add_str(vstr, "src");
        } else {
            vstr_add_str(vstr, qstr_str(pyb_config_source_dir));
        }
        vstr_add_char(vstr, '/');
        if (pyb_config_main == 0) {
            vstr_add_str(vstr, "main.py");
        } else {
            vstr_add_str(vstr, qstr_str(pyb_config_main));
        }
        if (!do_file(vstr_str(vstr))) {
            flash_error(3);
988
        }
989
        vstr_free(vstr);
990
991
    }

Damien's avatar
Damien committed
992
    //printf("init;al=%u\n", m_get_total_bytes_allocated()); // 1600, due to qstr_init
993
    //sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
994
995

    // Python!
996
    if (0) {
Damien's avatar
Damien committed
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
        //const char *pysrc = "def f():\n  x=x+1\nprint(42)\n";
        const char *pysrc =
            // impl01.py
            /*
            "x = 0\n"
            "while x < 400:\n"
            "    y = 0\n"
            "    while y < 400:\n"
            "        z = 0\n"
            "        while z < 400:\n"
            "            z = z + 1\n"
            "        y = y + 1\n"
            "    x = x + 1\n";
            */
            // impl02.py
1012
            /*
Damien's avatar
Damien committed
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
            "#@micropython.native\n"
            "def f():\n"
            "    x = 0\n"
            "    while x < 400:\n"
            "        y = 0\n"
            "        while y < 400:\n"
            "            z = 0\n"
            "            while z < 400:\n"
            "                z = z + 1\n"
            "            y = y + 1\n"
            "        x = x + 1\n"
            "f()\n";
1025
            */
1026
            /*
Damien's avatar
Damien committed
1027
1028
1029
1030
1031
1032
1033
            "print('in python!')\n"
            "x = 0\n"
            "while x < 4:\n"
            "    pyb_led(True)\n"
            "    pyb_delay(201)\n"
            "    pyb_led(False)\n"
            "    pyb_delay(201)\n"
1034
            "    x += 1\n"
Damien's avatar
Damien committed
1035
1036
1037
            "print('press me!')\n"
            "while True:\n"
            "    pyb_led(pyb_sw())\n";
1038
            */
Damien's avatar
Damien committed
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
            /*
            // impl16.py
            "@micropython.asm_thumb\n"
            "def delay(r0):\n"
            "    b(loop_entry)\n"
            "    label(loop1)\n"
            "    movw(r1, 55999)\n"
            "    label(loop2)\n"
            "    subs(r1, r1, 1)\n"
            "    cmp(r1, 0)\n"
            "    bgt(loop2)\n"
            "    subs(r0, r0, 1)\n"
            "    label(loop_entry)\n"
            "    cmp(r0, 0)\n"
            "    bgt(loop1)\n"
            "print('in python!')\n"
            "@micropython.native\n"
            "def flash(n):\n"
            "    x = 0\n"
            "    while x < n:\n"
            "        pyb_led(True)\n"
            "        delay(249)\n"
            "        pyb_led(False)\n"
            "        delay(249)\n"
            "        x = x + 1\n"
            "flash(20)\n";
            */
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
            // impl18.py
            /*
            "# basic exceptions\n"
            "x = 1\n"
            "try:\n"
            "    x.a()\n"
            "except:\n"
            "    print(x)\n";
            */
            // impl19.py
            "# for loop\n"
            "def f():\n"
            "    for x in range(400):\n"
            "        for y in range(400):\n"
            "            for z in range(400):\n"
            "                pass\n"
            "f()\n";
Damien's avatar
Damien committed
1083

1084
1085
        py_lexer_str_buf_t py_lexer_str_buf;
        py_lexer_t *lex = py_lexer_new_from_str_len("<stdin>", pysrc, strlen(pysrc), false, &py_lexer_str_buf);
Damien's avatar
Damien committed
1086

1087
1088
1089
1090
1091
1092
        // nalloc=1740;6340;6836 -> 140;4600;496 bytes for lexer, parser, compiler
        printf("lex; al=%u\n", m_get_total_bytes_allocated());
        sys_tick_delay_ms(1000);
        py_parse_node_t pn = py_parse(lex, PY_PARSE_FILE_INPUT);
        py_lexer_free(lex);
        if (pn != PY_PARSE_NODE_NULL) {
Damien's avatar
Damien committed
1093
            printf("pars;al=%u\n", m_get_total_bytes_allocated());
1094
            sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
1095
            //parse_node_show(pn, 0);
1096
            bool comp_ok = py_compile(pn, false);
Damien's avatar
Damien committed
1097
            printf("comp;al=%u\n", m_get_total_bytes_allocated());
1098
            sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
1099

1100
1101
1102
            if (!comp_ok) {
                printf("compile error\n");
            } else {
Damien's avatar
Damien committed
1103
1104
1105
1106
                // execute it!

                py_obj_t module_fun = rt_make_function_from_id(1);

1107
                // flash once
1108
                led_state(PYB_LED_G1, 1);
1109
                sys_tick_delay_ms(100);
1110
                led_state(PYB_LED_G1, 0);
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126

                nlr_buf_t nlr;
                if (nlr_push(&nlr) == 0) {
                    py_obj_t ret = rt_call_function_0(module_fun);
                    printf("done! got: ");
                    py_obj_print(ret);
                    printf("\n");
                    nlr_pop();
                } else {
                    // uncaught exception
                    printf("exception: ");
                    py_obj_print((py_obj_t)nlr.ret_val);
                    printf("\n");
                }

                // flash once
1127
                led_state(PYB_LED_G1, 1);
1128
                sys_tick_delay_ms(100);
1129
                led_state(PYB_LED_G1, 0);
Damien's avatar
Damien committed
1130

1131
                sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
1132
                printf("nalloc=%u\n", m_get_total_bytes_allocated());
1133
                sys_tick_delay_ms(1000);
Damien's avatar
Damien committed
1134
1135
1136
1137
            }
        }
    }

1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
    // HID example
    if (0) {
        uint8_t data[4];
        data[0] = 0;
        data[1] = 1;
        data[2] = -2;
        data[3] = 0;
        for (;;) {
            if (sw_get()) {
                data[0] = 0x01; // 0x04 is middle, 0x02 is right
            } else {
                data[0] = 0x00;
            }
            mma_start(MMA_ADDR, 1);
            mma_send_byte(0);
            mma_restart(MMA_ADDR, 0);
            for (int i = 0; i <= 1; i++) {
                int v = mma_read_ack() & 0x3f;
                if (v & 0x20) {
                    v |= ~0x1f;
                }
                data[1 + i] = v;
            }
            mma_read_nack();
            usb_hid_send_report(data);
            sys_tick_delay_ms(15);
        }
    }

1167
1168
1169
1170
    // wifi
    pyb_wlan_init();
    pyb_wlan_start();

1171
1172
    do_repl();

Damien's avatar
Damien committed
1173
1174
    // benchmark C version of impl02.py
    if (0) {
1175
        led_state(PYB_LED_G1, 1);
1176
        sys_tick_delay_ms(100);
1177
        led_state(PYB_LED_G1, 0);
Damien's avatar
Damien committed
1178
        impl02_c_version();
1179
        led_state(PYB_LED_G1, 1);
1180
        sys_tick_delay_ms(100);
1181
        led_state(PYB_LED_G1, 0);
Damien's avatar
Damien committed
1182
1183
1184
    }

    // SD card testing
1185
1186
    if (1) {
        extern void sdio_init(void);
1187
        //sdio_init();
Damien's avatar
Damien committed
1188
1189
    }

1190
1191
1192
1193
    printf("PYB: sync filesystems\n");
    pyb_sync();

    printf("PYB: soft reboot\n");
1194
1195

    first_soft_reset = false;
1196
    goto soft_reset;
Damien's avatar
Damien committed
1197
}
1198
1199
1200
1201
1202

double __aeabi_f2d(float x) {
    // TODO
    return 0.0;
}
Damien's avatar
Damien committed
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212

float __aeabi_d2f(double x) {
    // TODO
    return 0.0;
}

double sqrt(double x) {
    // TODO
    return 0.0;
}
1213
1214
1215
1216
1217

machine_float_t machine_sqrt(machine_float_t x) {
    // TODO
    return x;
}